Re: [PATCH 1/4] arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreen

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 23 Jul 2024 at 02:22, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
> On 22.07.2024 1:57 PM, Dmitry Baryshkov wrote:
> > There is no point in keeping touchscreen disabled, enable corresponding
> > i2c-hid device.
> >
> > 04F3:2608 Touchscreen as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input1
> > 04F3:2608 as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input2
> > 04F3:2608 as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input3
> > 04F3:2608 Stylus as /devices/platform/soc@0/c179000.i2c/i2c-0/0-0010/0018:04F3:2608.0001/input/input4
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > ---
> >  .../boot/dts/qcom/msm8998-lenovo-miix-630.dts      | 28 ++++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
> > index a105143bee4a..118c55f5bcfd 100644
> > --- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
> > +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
> > @@ -11,6 +11,24 @@ / {
> >       chassis-type = "convertible";
> >  };
> >
> > +&blsp1_i2c5 {
> > +     clock-frequency = <400000>;
> > +     status = "okay";
> > +
> > +     tsc1: hid@10 {
> weird (and unused label)
>
> very non-specific node name too
>
> > +             compatible = "hid-over-i2c";
> > +             reg = <0x10>;
> > +             hid-descr-addr = <0x1>;
> > +
> > +             interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
> > +
> > +             pinctrl-0 = <&i2c5_hid_active>;
> > +             pinctrl-names = "default";
> > +
> > +             wakeup-source;
>
> double tap to wake? tap to wake?
>
> > +     };
> > +};
> > +
> >  &blsp1_i2c6 {
> >       status = "okay";
> >
> > @@ -35,3 +53,13 @@ &remoteproc_mss {
> >  &sdhc2 {
> >       cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
> >  };
> > +
> > +&tlmm {
> > +     i2c5_hid_active: i2c5-hid-active-state {
> > +             pins = "gpio125";
> > +             function = "gpio";
> > +
> > +             bias-pull-up;
> > +             drive-strength = <2>;
>
> Since there are no other pin definitions, you can do better and not
> copy the old rotten style ;)

Both node and pinctrl were c&p from c630. But was is rotten here?


-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux