DMA Engine

• Thread Index

• Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2] dma: rcar-dmac: clear pertinence number of channels
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2] dma: rcar-dmac: clear pertinence number of channels
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH] dmaengine: rcar-dmac: clear pertinence number of channels
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [RFC 00/15] tree-wide: mfd: syscon: Fix unmet ioremap dependency
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 01/15] clocksource: atmel: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 02/15] dmaengine: nxp: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 03/15] hwspinlock: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 05/15] phy: hi6220: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 06/15] pinctrl: rockchip: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 07/15] pinctrl: mvebu: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 10/15] net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 13/15] staging: media: omap4iss: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 12/15] soc: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 14/15] usb: xhci: mtk: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] dmaengine: rcar-dmac: clear pertinence number of channels
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH 06/14] dma: sirf: use __maybe_unused to hide pm functions
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH 00/14] drivers: use __maybe_unused to hide pm functions
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 06/14] dma: sirf: use __maybe_unused to hide pm functions
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH V2] dma: tegra: don't open code of_device_get_match_data()
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH] dmaengine: sh: shdmac: don't open code of_device_get_match_data()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: rcar_sata DMA warnings on Salvator-X
  • From: Dirk Behme <dirk.behme@xxxxxxxxx>
• Re: rcar_sata DMA warnings on Salvator-X
  • From: Tejun Heo <tj@xxxxxxxxxx>
• [PATCH] dmaengine: sh: shdmac: don't open code of_device_get_match_data()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] dma: tegra: don't open code of_device_get_match_data()
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 1/1] dma: tegra: don't open code of_device_get_match_data()
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH v2] dmaengine: pl330: fix to support the burst mode
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] asm-generic: remove old nonatomic-io wrapper files
  • From: Yisen Zhuang <Yisen.zhuang@xxxxxxxxxx>
• Re: [PATCH] asm-generic: remove old nonatomic-io wrapper files
  • From: Simon Horman <simon.horman@xxxxxxxxxxxxx>
• [PATCH] dmaengine: qcom_bam_dma: Make driver work for BE
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: musb: sunxi: support module autoloading
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 2/3] dmaengine: sun4i: support module autoloading
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 1/3] [media] rc: sunxi-cir: support module autoloading
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: rcar_sata DMA warnings on Salvator-X
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [patch] dma/mic_x100_dma: IS_ERR() vs PTR_ERR() typo
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] asm-generic: remove old nonatomic-io wrapper files
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Francois Romieu <romieu@xxxxxxxxxxxxx>
• Re: [PATCH] asm-generic: remove old nonatomic-io wrapper files
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: Softirq priority inversion from "softirq: reduce latencies"
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Softirq priority inversion from "softirq: reduce latencies"
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] dmaengine: pxa_dma: fix cyclic transfers
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V14 9/9] vfio, platform: add QTI HIDMA reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V14 9/9] vfio, platform: add QTI HIDMA reset driver
  • From: Eric Auger <eric.auger@xxxxxxxxxx>
• Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Eric Auger <eric.auger@xxxxxxxxxx>
• Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH] asm-generic: remove old nonatomic-io wrapper files
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 4/4] dmaengine: xilinx_vdma: Use readl_poll_timeout instead of do while loop's
  • From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
• [PATCH v3 3/4] dmaengine: xilinx_vdma: Fix issues with non-parking mode
  • From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
• [PATCH v3 1/4] dmaengine: xilinx_vdma: Improve SG engine handling
  • From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
• [PATCH v3 2/4] dmaengine: xilinx_vdma: Simplify spin lock handling
  • From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
• Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: RFC: Support DMA timeout interrupt for UART Rx
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: rcar_sata DMA warnings on Salvator-X
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: rcar_sata DMA warnings on Salvator-X
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: rcar_sata DMA warnings on Salvator-X
  • From: Tejun Heo <tj@xxxxxxxxxx>
• [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2] dmaengine: pl330: fix to support the burst mode
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
  • From: Caesar Wang <caesar.upstream@xxxxxxxxx>
• Re: [PATCH] dmaengine: pl330: fix to support the brust mode
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: pl330: fix to support the brust mode
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH] dmaengine: pl330: Fix some race conditions in residue calculation
  • From: "Jon Medhurst (Tixy)" <tixy@xxxxxxxxxx>
• Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• rcar_sata DMA warnings on Salvator-X
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH V7 4/6] i2c: qup: Add bam dma capabilities
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
  • From: Caesar Wang <caesar.upstream@xxxxxxxxx>
• [PATCH] dmaengine: pl330: fix to support the brust mode
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dmaengine: mmp-pdma: add number of requestors
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• RE: [PATCH v2 4/4] dmaengine: xilinx_vdma: Improve channel idle checking
  • From: Appana Durga Kedareswara Rao <appana.durga.rao@xxxxxxxxxx>
• RE: [PATCH v2 2/4] dmaengine: xilinx_vdma: Simplify spin lock handling
  • From: Appana Durga Kedareswara Rao <appana.durga.rao@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v2 4/4] dmaengine: xilinx_vdma: Improve channel idle checking
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v2 2/4] dmaengine: xilinx_vdma: Simplify spin lock handling
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 09/15] dmaengine: dw: keep entire platform data in struct dw_dma
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 01/15] dmaengine: dw: fix byte order of hw descriptor fields
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 02/15] dmaengine: dw: clear LLP_[SD]_EN bits in last descriptor of a chain
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 10/15] dmaengine: dw: pass platform data via struct dw_dma_chip
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 05/15] dmaengine: dw: set LMS field in descriptors
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 12/15] dmaengine: dw: move dwc->paused to dwc->flags
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 15/15] dmaengine: dw: set cdesc to NULL when free cyclic transfers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 14/15] dmaengine: dw: move residue to a descriptor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 08/15] dmaengine: dw: define counter variables as unsigned int
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 00/15] Fixes / cleanups in dw_dmac (affects on few subsystems)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 11/15] dmaengine: dw: platform: use field-by-field initialization
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 07/15] dmaengine: dw: revisit data_width property
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 13/15] dmaengine: dw: move dwc->initialized to dwc->flags
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 04/15] dmaengine: dw: set src and dst master select according to xfer direction
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 06/15] dmaengine: dw: substitute dma_read_byaddr by dma_readl_native
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH][CFT]: dmaengine: make slave address physical
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH][CFT]: dmaengine: make slave address physical
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH][CFT]: dmaengine: make slave address physical
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH][CFT]: dmaengine: make slave address physical
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• Re: [PATCH][CFT]: dmaengine: make slave address physical
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH][CFT]: dmaengine: make slave address physical
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH][CFT]: dmaengine: make slave address physical
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH][CFT]: dmaengine: make slave address physical
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• [RESEND PATCH V7 4/6] i2c: qup: Add bam dma capabilities
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH][CFT]: dmaengine: make slave address physical
  • From: "Niklas Söderlund" <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: idma64: fix typo in WR_ISSUE_THD(x)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH][CFT]: dmaengine: make slave address physical
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] dmaengine: xilinx_vdma: Fix issues with non-parking mode
  • From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
• [PATCH v2 1/4] dmaengine: xilinx_vdma: Improve SG engine handling
  • From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
• [PATCH v2 4/4] dmaengine: xilinx_vdma: Improve channel idle checking
  • From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
• [PATCH v2 2/4] dmaengine: xilinx_vdma: Simplify spin lock handling
  • From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
• RE: [PATCH] dmaengine: xilinx_vdma: Fix issues with non-parking mode
  • From: Appana Durga Kedareswara Rao <appana.durga.rao@xxxxxxxxxx>
• Re: [PATCH] dmaengine: xilinx_vdma: Fix issues with non-parking mode
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: idma64: fix typo in WR_ISSUE_THD(x)
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: acpi-dma: align debug message with flow
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCHv2 1/1] dmaengine: enable mxs-dma for imx6ul
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dmaengine: edma: Fetch echan->edesc while holding lock in edma_comletion_handler
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v2] dmaengine: edma: Implement device_synchronize callback
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v2] dmaengine: omap-dma: Implement device_synchronize callback
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH 3/3] usb: musb: sunxi: support module autoloading
  • From: Emilio López <emilio@xxxxxxxxxxxxx>
• [PATCH 1/3] [media] rc: sunxi-cir: support module autoloading
  • From: Emilio López <emilio@xxxxxxxxxxxxx>
• [PATCH 2/3] dmaengine: sun4i: support module autoloading
  • From: Emilio López <emilio@xxxxxxxxxxxxx>
• [PATCH][CFT]: dmaengine: make slave address physical
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [GIT PULL]: dmaengine updates for 4.5-rc5
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH] dmaengine: at_xdmac: fix residue computation
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH v2] dma: mv_xor_v2: new driver
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] dma: mmp_pdma: Add the #dma-requests DT property documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] WIP: at_xdmac: fix residue computation
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH] WIP: at_xdmac: fix residue computation
  • From: David Engraf <david.engraf@xxxxxxxxx>
• [PATCH 2/4] dmaengine: pl330: cleanup brst_len usage
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH 4/4] dmaengine: pl330: make cyclic transfer free runnable
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH 1/4] dmaengine: pl330: cleanup quirk pass code
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH 3/4] dmaengine: pl330: don't emit code for one iteration loop
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• Cleanups and improvenments for pl330
  • From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
• [PATCH] WIP: at_xdmac: fix residue computation
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH V2 7/8] dmaengine: bcm2835: add slave_sg support to bcm2835-dma
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH V2 5/8] dmaengine: bcm2835: move cyclic member from bcm2835_chan into bcm2835_desc
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH V2 4/8] dmaengine: bcm2835: add additional defines for DMA-registers
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH v8 6/7] mtd: nand: gpmi: correct bitflip for erased NAND page
  • From: Han Xu <xhnjupt@xxxxxxxxx>
• Re: [PATCH] at_xdmac fix status read in cyclic mode
  • From: David Engraf <david.engraf@xxxxxxxxx>
• Re: [PATCH] at_xdmac fix status read in cyclic mode
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH] at_xdmac fix status read in cyclic mode
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• [PATCH] at_xdmac fix status read in cyclic mode
  • From: David Engraf <david.engraf@xxxxxxxxx>
• Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH v2] dmaengine: pxa_dma: fix cyclic transfers
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH v4 4/8] arm: dma-mapping: add {map,unmap}_resource for iommu ops
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v4 0/8] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v4 5/8] dmaengine: rcar-dmac: group slave configuration
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v4 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH] dmaengine: use phys_addr_t for slave configuration
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• [PATCH v4 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v4 2/8] dma-mapping: add {map,unmap}_resource to dma_map_ops
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v4 8/8] ARM: dts: r8a7791: add iommus to dmac0 and dmac1
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v4 3/8] dma-mapping: add dma_{map,unmap}_resource
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v4 1/8] iommu: Add MMIO mapping type
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH] dmaengine: pxa_dma: fix cyclic transfers
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH v3 1/8] iommu: Add MMIO mapping type
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH v3 1/8] iommu: Add MMIO mapping type
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v3 1/8] iommu: Add MMIO mapping type
  • From: "Niklas Söderlund" <niklas.soderlund@xxxxxxxxxxxx>
• [PATCH] dmaengine: xilinx_vdma: Fix issues with non-parking mode
  • From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
• [PATCH v1 1/1] dmaengine: hsu: set HSU_CH_MTSR to memory width
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] dmaengine: idma64: fix typo in WR_ISSUE_THD(x)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] dmaengine: acpi-dma: align debug message with flow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: acpi-dma: truly print message when appropriate
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/4] dma: mmp_pdma: Add the #dma-requests DT property documentation
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH v2 2/4] dmaengine: mmp-pdma: add number of requestors
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH v2 3/4] ARM: pxa: add the number of DMA requestor lines
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH v2 1/4] dma: mmp_pdma: Add the #dma-requests DT property documentation
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 4/4] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH] dmaengine: use phys_addr_t for slave configuration
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] Allocate DMA descriptors with contig DMA memory
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 4/4] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dmaengine: use phys_addr_t for slave configuration
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 4/4] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: idma64: clear LLP_[SD]_EN bits in last descriptor
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 4/4] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: idma64: clear LLP_[SD]_EN bits in last descriptor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH] dma: mv_xor_v2: fix platform_no_drv_owner.cocci warnings
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dma: mv_xor_v2: new driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] dma: mv_xor_v2: new driver
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dma: mmp_pdma: Add the #requestors DT property documentation
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V7 1/6] i2c: qup: Change qup_wait_writeready function to use for all timeouts
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V7 2/6] i2c: qup: Add V2 tags support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 1/4] dma: mmp_pdma: Add the #requestors DT property documentation
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 4/4] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH 3/4] ARM: pxa: add the number of DMA requestor lines
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH 2/4] dmaengine: mmp-pdma: add number of requestors
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH 0/4] Fix pxa dma requestor lines
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH 1/4] dma: mmp_pdma: Add the #requestors DT property documentation
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/8] iommu: Add MMIO mapping type
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• RE: [PATCH v2] IOATDMA: fix timer code that continues to restart channels during idle
  • From: "Jiang, Dave" <dave.jiang@xxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
  • From: Måns Rullgård <mans@xxxxxxxxx>
• [PATCHv2 1/1] dmaengine: enable mxs-dma for imx6ul
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• [PATCH] dmaengine: edma: Fetch echan->edesc while holding lock in edma_comletion_handler
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2] dmaengine: edma: Implement device_synchronize callback
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• Re: [PATCH v2] dmaengine: edma: Implement device_synchronize callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] dmaengine: edma: Implement device_synchronize callback
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dmaengine: omap-dma: Implement device_synchronize callback
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] dmaengine: edma: Implement device_synchronize callback
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2] dmaengine: edma: Implement device_synchronize callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2] dmaengine: omap-dma: Implement device_synchronize callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] dmaengine: edma: Implement device_synchronize callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] dmaengine: omap-dma: Implement device_synchronize callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] dmaengine: omap-dma: Implement device_synchronize callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] dmaengine: edma: Implement device_synchronize callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v2] IOATDMA: fix timer code that continues to restart channels during idle
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v3 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
  • From: "Niklas Söderlund" <niklas.soderlund@xxxxxxxxxxxx>
• Re: [PATCH v3 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/8] dmaengine: rcar-dmac: group slave configuration
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/8] arm: dma-mapping: add {map,unmap}_resource for iommu ops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/8] dma-mapping: add {map,unmap}_resource to dma_map_ops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/8] iommu: Add MMIO mapping type
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• commit 271e1b86e691 is breaking DMA uart on SoCFPGA
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] dmaengine: IOATDMA: Allocate DMA descriptor ring in contig DMA memory
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• [PATCH 2/3] dmaengine: IOATDMA: Removing descriptor ring reshape
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• [PATCH 1/3] dmaengine: IOATDMA: Convert pci_pool_* to dma_pool_*
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• [PATCH 0/3] Allocate DMA descriptors with contig DMA memory
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• Re: [PATCH v3 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH/RFC] dmaengine: sh: Use ARCH_RENESAS
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH v1 1/1] dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/8] dma-mapping: add {map,unmap}_resource to dma_map_ops
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v3 3/8] dma-mapping: add dma_{map,unmap}_resource
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• [PATCH v3 8/8] ARM: dts: r8a7791: add iommus to dmac0 and dmac1
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v3 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v3 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v3 5/8] dmaengine: rcar-dmac: group slave configuration
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v3 4/8] arm: dma-mapping: add {map,unmap}_resource for iommu ops
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v3 3/8] dma-mapping: add dma_{map,unmap}_resource
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v3 2/8] dma-mapping: add {map,unmap}_resource to dma_map_ops
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v3 0/8] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v3 1/8] iommu: Add MMIO mapping type
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH v2] IOATDMA: fix timer code that continues to restart channels during idle
  • From: "Jiang, Dave" <dave.jiang@xxxxxxxxx>
• Re: [PATCH] dmaengine: use phys_addr_t for slave configuration
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH/RFC] dmaengine: sh: Use ARCH_RENESAS
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• RE: [PATCH RESEND 1/2] dmaengine: added MIC X200 Coprocessor DMA driver
  • From: "Lawrynowicz, Jacek" <jacek.lawrynowicz@xxxxxxxxx>
• Re: [PATCH] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v7 8/9] dmaengine: pl330: add max burst for dmaengine
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v7 7/9] dmaengine: core: expose max burst capability to clients
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v7 3/9] dmaengine: pl330: add quirk for broken no flushp
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v7 1/9] dmaengine: pl330: support burst mode for dev-to-mem and mem-to-dev transmit
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
  • From: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
• Re: [PATCH v4] dmaengine: edma: fix residue race for cyclic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH] dmaengine: pxa_dma: fix the maximum requestor line
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
  • From: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
• Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH RESEND 1/2] dmaengine: added MIC X200 Coprocessor DMA driver
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/6] dma: enable mxs-dma for imx6ul
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v4] dmaengine: edma: fix residue race for cyclic
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: dw: pci: add ID for WildcatPoint PCH
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: idma64: clear LLP_[SD]_EN bits in last descriptor
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: acpi-dma: truly print message when appropriate
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: dma engine driver
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• dma engine driver
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• RE: [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• [PATCH V14 1/9] dma: qcom_bam_dma: move to qcom directory
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V14 2/9] dma: hidma: Add Device Tree binding
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V14 3/9] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V14 4/9] dma: add Qualcomm Technologies HIDMA channel driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V14 6/9] dma: qcom_hidma: add debugfs hooks
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V14 5/9] dma: qcom_hidma: implement lower level hardware interface
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V14 7/9] dma: qcom_hidma: add support for object hierarchy
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V14 9/9] vfio, platform: add QTI HIDMA reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RESEND 1/2] dmaengine: added MIC X200 Coprocessor DMA driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH RESEND 2/2] MAINTAINERS: update for mic
  • From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
• [PATCH RESEND 1/2] dmaengine: added MIC X200 Coprocessor DMA driver
  • From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
• [PATCH RESEND 0/2] Enable DMA driver for MIC X200 Coprocessor
  • From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
• [PATCH 2/2] MAINTAINERS: update for mic
  • From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
• [PATCH 1/2] dmaengine: added MIC X200 Coprocessor DMA driver
  • From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
• [PATCH 0/2] Enable DMA driver for MIC X200 Coprocessor
  • From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
• Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] dma-mapping: add dma_{map,unmap}_page_attrs
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] dma-mapping: add dma_{map,unmap}_page_attrs
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 11/15] dmaengine: pch_dma: Allow build on MIPS platforms
  • From: Paul Burton <paul.burton@xxxxxxxxxx>
• Re: [PATCH] dmaengine: use phys_addr_t for slave configuration
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH/RFC] dmaengine: sh: Use ARCH_RENESAS
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/7] mtd: nand: gpmi: correct bitflip for erased NAND page
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: imx6: change TX6 module names due to new HW revision
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH 3/6] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH 2/6] ARM: dts: imx6: use correct mclk frequency for audio codec
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH 1/6] dma: enable mxs-dma for imx6ul
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Eric Auger <eric.auger@xxxxxxxxxx>
• Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Eric Auger <eric.auger@xxxxxxxxxx>
• Re: [PATCH V13 10/10] vfio, platform: add QTI HIDMA reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V13 10/10] vfio, platform: add QTI HIDMA reset driver
  • From: Eric Auger <eric.auger@xxxxxxxxxx>
• Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4] dmaengine: edma: fix residue race for cyclic
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
  • From: Caesar Wang <caesar.upstream@xxxxxxxxx>
• Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH v2] IOATDMA: fix timer code that continues to restart channels during idle
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH V2 2/8] dmaengine: bcm2835: remove unnecessary masking of dma channels
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH V13 02/10] dma: hidma: Add Device Tree binding
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V13 01/10] dma: qcom_bam_dma: move to qcom directory
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V13 04/10] dma: add Qualcomm Technologies HIDMA channel driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V13 05/10] dma: qcom_hidma: implement lower level hardware interface
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V13 03/10] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V13 06/10] dma: qcom_hidma: add debugfs hooks
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V13 07/10] dma: qcom_hidma: add support for object hierarchy
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V13 10/10] vfio, platform: add QTI HIDMA reset driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V13 00/10] dma: add Qualcomm Technologies HIDMA driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• [PATCH v1 1/1] dmaengine: dw: pci: add ID for WildcatPoint PCH
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] dmaengine: qcom_bam_dma: use correct pipe FIFO size
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH V2 1/8] dmaengine: bcm2835: set residue_granularity field
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH] dmaengine: edma: Remove dynamic TPTC power management feature
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4] dmaengine: edma: fix residue race for cyclic
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: edma: Remove dynamic TPTC power management feature
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• RE: [PATCH V7 0/6] i2c: qup: Add support for v2 tags and bam dma
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• RE: [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: edma: fix residue race for cyclic
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dmaengine: edma: Remove dynamic TPTC power management feature
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] ARM: edma: fix residue race for cyclic
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] dmaengine: edma: Remove dynamic TPTC power management feature
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v1 1/1] dmaengine: idma64: clear LLP_[SD]_EN bits in last descriptor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• [RFC] pl330: Interleaved (2D) Transfers
  • From: Jeremy Trimble <jeremy.trimble@xxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/6] dma: enable mxs-dma for imx6ul
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 00/15] dmaengine: dw: various fixes and cleanups
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 00/15] dmaengine: dw: various fixes and cleanups
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH v2 1/5] dma-mapping: add dma_{map,unmap}_page_attrs
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 11/15] dmaengine: dw: platform: use field-by-field initialization
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
  • From: Vineet Gupta <Vineet.Gupta1@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH/RFC] dmaengine: rcar-dmac: Use CAE/CAIR instead of error IRQ
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] dma-mapping: add dma_{map,unmap}_page_attrs
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: rcar-dmac: Rename highmem/lowmem
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Hans-Christian Noren Egtvedt <egtvedt@xxxxxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Hans-Christian Noren Egtvedt <egtvedt@xxxxxxxxxxxx>
• [PATCH 04/15] dmaengine: dw: set src and dst master select according to xfer direction
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 05/15] dmaengine: dw: set LMS field in descriptors
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 06/15] dmaengine: dw: substitute dma_read_byaddr by dma_readl_native
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 07/15] dmaengine: dw: revisit data_width property
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 09/15] dmaengine: dw: keep entire platform data in struct dw_dma
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 08/15] dmaengine: dw: define counter variables as unsigned int
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 10/15] dmaengine: dw: pass platform data via struct dw_dma_chip
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 11/15] dmaengine: dw: platform: use field-by-field initialization
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 12/15] dmaengine: dw: move dwc->paused to dwc->flags
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 13/15] dmaengine: dw: move dwc->initialized to dwc->flags
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 14/15] dmaengine: dw: move residue to a descriptor
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 15/15] dmaengine: dw: set cdesc to NULL when free cyclic transfers
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 02/15] dmaengine: dw: clear LLP_[SD]_EN bits in last descriptor of a chain
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 01/15] dmaengine: dw: fix byte order of hw descriptor fields
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 00/15] dmaengine: dw: various fixes and cleanups
  • From: Mans Rullgard <mans@xxxxxxxxx>
• Re: [PATCH V7 0/6] i2c: qup: Add support for v2 tags and bam dma
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 7/7] mtd: nand: gpmi: support NAND on i.MX6UL
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v8 6/7] mtd: nand: gpmi: correct bitflip for erased NAND page
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v8 5/7] mtd: nand: gpmi: add GPMI NAND support for i.MX7D
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v8 4/7] mtd: nand: gpmi: may use minimum required ecc for 744 oobsize NAND
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v8 1/7] mtd: nand: gpmi: add gpmi dsm supend/resume support
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH 3/4] tty: serial: 8250: omap: convert to using cyclic transfers
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] tty: serial: 8250: omap: consume spurious interrupts
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] tty: serial: 8250: omap: convert to using cyclic transfers
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] tty: serial: 8250: omap: consume spurious interrupts
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] tty: serial: 8250: omap: convert to using cyclic transfers
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] tty: serial: 8250: add optional spinlock arg to serial8250_rx_chars
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• [PATCH v7 3/9] dmaengine: pl330: add quirk for broken no flushp
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• [PATCH v7 7/9] dmaengine: core: expose max burst capability to clients
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• [PATCH v7 8/9] dmaengine: pl330: add max burst for dmaengine
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• [PATCH v7 1/9] dmaengine: pl330: support burst mode for dev-to-mem and mem-to-dev transmit
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• [PATCH 4/4] tty: serial: 8250: omap: consume spurious interrupts
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• [PATCH 3/4] tty: serial: 8250: omap: convert to using cyclic transfers
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• [PATCH 2/4] tty: serial: 8250: add optional spinlock arg to serial8250_rx_chars
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• [PATCH 1/4] ARM: edma: special case slot limit workaround
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• [PATCH 0/4] serial: omap: robustify for high speed transfers
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: acpi-dma: truly print message when appropriate
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3] ARM: edma: fix residue race for cyclic
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2 4/5] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v2 5/5] ARM: dts: r8a7791: add iommus to dmac0 and dmac1
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v2 3/5] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v2 2/5] dmaengine: rcar-dmac: group slave configuration
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v2 1/5] dma-mapping: add dma_{map,unmap}_page_attrs
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v2 0/5] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH v1 1/1] dmaengine: acpi-dma: truly print message when appropriate
  • From: "Westerberg, Mika" <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: r8a7795: Complete SYS-DMAC nodes
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH v1 1/1] dmaengine: acpi-dma: truly print message when appropriate
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 1/6] dma: enable mxs-dma for imx6ul
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/6] ARM: dts: imx6: change TX6 module names due to new HW revision
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/6] ARM: dts: imx6: use correct mclk frequency for audio codec
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/6] ARM: dts: update Ka-Ro i.MX6 module support
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• [PATCH 6/6] ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/6] ARM: dts: imx6: add support for more Ka-Ro electronics modules
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/6] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] dmaengine fixes for 4.5-rc1
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH v2] IOATDMA: fix timer code that continues to restart channels during idle
  • From: Dave Jiang <dave.jiang@xxxxxxxxx>
• RE: [PATCH V7 0/6] i2c: qup: Add support for v2 tags and bam dma
  • From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
• [PATCH V7 1/6] i2c: qup: Change qup_wait_writeready function to use for all timeouts
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V7 2/6] i2c: qup: Add V2 tags support
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V7 5/6] dts: msm8974: Add blsp2_bam dma node
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V7 6/6] dts: msm8974: Add dma channels for blsp2_i2c1 node
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V7 0/6] i2c: qup: Add support for v2 tags and bam dma
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH v2] arm64: dts: r8a7795: Complete SYS-DMAC nodes
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [Question] cacheline sharing problem on DMA for custom outer-cache
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH V6 0/6] i2c: qup: Add support for v2 tags and bam dma
  • From: ntelkar@xxxxxxxxxxxxxx
• [PATCH 03/10 v2] dmaengine: ppc4xx: use to_platform_device()
  • From: Geliang Tang <geliangtang@xxxxxxx>
• Re: [PATCH] dmaengine: rcar-dmac: Document SoC specific bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: rcar-dmac: Document SoC specific bindings
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V12 2/7] dma: hidma: Add Device Tree support
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: at_xdmac: fix resume for cyclic transfers
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [Question] cacheline sharing problem on DMA for custom outer-cache
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [Question] cacheline sharing problem on DMA for custom outer-cache
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH V12 2/7] dma: hidma: Add Device Tree support
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH V12 2/7] dma: hidma: Add Device Tree support
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH] dmaengine: at_xdmac: fix resume for cyclic transfers
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH 2/2] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V12 2/7] dma: hidma: Add Device Tree support
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V12 2/7] dma: hidma: Add Device Tree support
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH V12 2/7] dma: hidma: Add Device Tree support
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH V12 2/7] dma: hidma: Add Device Tree support
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [Question] cacheline sharing problem on DMA for custom outer-cache
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [Question] cacheline sharing problem on DMA for custom outer-cache
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH/RFC] dmaengine: rcar-dmac: Use CAE/CAIR instead of error IRQ
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH] dmaengine: rcar-dmac: Document SoC specific bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] dmaengine: rcar-dmac: Rename highmem/lowmem
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• RE: [PATCH 6/6] Serial:8250: New Port Type PORT_AMD_8250
  • From: "Wang, Annie" <Annie.Wang@xxxxxxx>
• Re: [PATCH v2 0/2] dmaengine: dw: fix cyclic transfers
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: dw: fix cyclic transfer callbacks
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH V9 2/5] dma: add Qualcomm Technologies HIDMA management driver
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH V9 2/5] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: edma: Fix paRAM slot allocation for entry channel 0
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4.4-rc8 v4] dmaengine: ioatdma: Squelch framesize warnings
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dma: ep93xx: Treat STALL and NFB IRQs same way
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V2 4/8] dmaengine: bcm2835: add additional defines for DMA-registers
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH] dmaengine: dw: fix a typo for bitfields of CTL_LO
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [GIT PULL] slave dmaengine updates for 4.5-rc1
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH V6 0/6] i2c: qup: Add support for v2 tags and bam dma
  • From: Archit Taneja <architt@xxxxxxxxxxxxxx>
• [PATCH V6 0/6] i2c: qup: Add support for v2 tags and bam dma
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V6 1/6] i2c: qup: Change qup_wait_writeready function to use for all timeouts
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V6 2/6] i2c: qup: Add V2 tags support
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V6 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V6 5/6] dts: msm8974: Add blsp2_bam dma node
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V6 4/6] i2c: qup: Add bam dma capabilities
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• [PATCH V6 6/6] dts: msm8974: Add dma channels for blsp2_i2c1 node
  • From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: dw: fix cyclic transfer callbacks
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: dw: fix cyclic transfer callbacks
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: dw: fix cyclic transfer callbacks
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: dw: fix cyclic transfer callbacks
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: dw: fix cyclic transfer callbacks
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: dw: fix cyclic transfer callbacks
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH V12 1/7] dma: qcom_bam_dma: move to qcom directory
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V12 2/7] dma: hidma: Add Device Tree support
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V12 4/7] dma: add Qualcomm Technologies HIDMA channel driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V12 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V12 6/7] dma: qcom_hidma: add debugfs hooks
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V12 5/7] dma: qcom_hidma: implement lower level hardware interface
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH V12 7/7] dma: qcom_hidma: add support for object hierarchy
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• [PATCH v12 0/7] dma: add Qualcomm Technologies HIDMA driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: dw: fix cyclic transfer callbacks
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: dw: fix cyclic transfer callbacks
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dmaengine: dw: fix cyclic transfer setup
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v2 1/2] dmaengine: dw: fix cyclic transfer setup
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH v2 2/2] dmaengine: dw: fix cyclic transfer callbacks
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH v2 0/2] dmaengine: dw: fix cyclic transfers
  • From: Mans Rullgard <mans@xxxxxxxxx>
• Re: [PATCH] dmaengine: dw: fix cyclic transfers
  • From: Måns Rullgård <mans@xxxxxxxxx>
• [PATCH] dmaengine: edma: Fix paRAM slot allocation for entry channel 0
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH 1/6] 8250/Kconfig: add config option CONFIG_SERIAL_8250_AMD
  • From: "Wang, Annie" <Annie.Wang@xxxxxxx>
• Re: [PATCH] dmaengine: dw: fix cyclic transfers
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 0/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH] dmaengine: dw: fix cyclic transfers
  • From: Mans Rullgard <mans@xxxxxxxxx>
• Re: [PATCH V9 2/5] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V11 5/7] dma: qcom_hidma: implement lower level hardware interface
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [PATCH V11 3/7] dma: add Qualcomm Technologies HIDMA management driver
  • From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
• Re: [V5,6/6] dts: msm8974: Add dma channels for blsp2_i2c1 node
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [V5,5/6] dts: msm8974: Add blsp2_bam dma node
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [V5,4/6] i2c: qup: Add bam dma capabilities
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [V5, 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• [PATCH v4.4-rc8 v4] dmaengine: ioatdma: Squelch framesize warnings
  • From: tim.gardner@xxxxxxxxxxxxx
• Re: [PATCH v4.4-rc8 v3] dmaengine: ioatdma: Squelch framesize warnings
  • From: "Jiang, Dave" <dave.jiang@xxxxxxxxx>
• Re: [PATCH v4.4-rc8 v3] dmaengine: ioatdma: Squelch framesize warnings
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH v4.4-rc8 v3] dmaengine: ioatdma: Squelch framesize warnings
  • From: tim.gardner@xxxxxxxxxxxxx
• Re: [PATCH v4.4-rc8 v2] dmaengine: ioatdma: Squelch framesize warnings
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH v4.4-rc8 v2] dmaengine: ioatdma: Squelch framesize warnings
  • From: tim.gardner@xxxxxxxxxxxxx
• [GIT PULL] dmaengine fixes for 4.4
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH] dma: ep93xx: Treat STALL and NFB IRQs same way
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxx>
• Re: [PATCH v4.4-rc8] dmaengine: ioatdma: Squelch framesize warnings
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH v4.4-rc8] dmaengine: ioatdma: Squelch framesize warnings
  • From: tim.gardner@xxxxxxxxxxxxx
• [PATCH V2 8/8] dmaengine: bcm2835: add dma_memcopy support to bcm2835-dma
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 7/8] dmaengine: bcm2835: add slave_sg support to bcm2835-dma
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 5/8] dmaengine: bcm2835: move cyclic member from bcm2835_chan into bcm2835_desc
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 4/8] dmaengine: bcm2835: add additional defines for DMA-registers
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 2/8] dmaengine: bcm2835: remove unnecessary masking of dma channels
  • From: kernel@xxxxxxxxxxxxxxxx