The DMA-enabled OMAP UART driver in its current form queues 48 bytes for a DMA-RX transfer. After the transfer is complete, a new transfer of 48 bytes is queued. The DMA completion callback runs in tasklet context, so a reschedule with context switch is required for the completion to be processed and the next 48 bytes to be queued. When running at a high speed such as 3Mbit, the CPU has 128us between when the DMA hardware transfer completes and when the DMA hardware must be fully prepared for the next transfer. For an embedded board running applications, this does not give the CPU much time. If the UART is using hardware flow control, this situation results in a dramatic decrease in real transfer speeds. If flow control is not used, the CPU will almost certainly be forced to drop data. This patch series modifies the UART driver to use cyclic DMA transfers with a growable ring buffer to accommodate baud rates. The ring buffer is large enough to hold at least 1s of RX-data. (At 3Mbit that is 367KiB.) In order to ensure that data in the ring buffer is not overwritten before being processed by the tty layer, a hrtimer is used as a watchdog. With this patch series, the UART driver is resilent against latencies up to 500ms. This means that if no flow control is used, data will not be dropped until such latencies occur. If hardware flow control is used, real transfer speeds will not be affected until such latencies occur. Patch series against next-20160122. John Ogness (4): ARM: edma: special case slot limit workaround tty: serial: 8250: add optional spinlock arg to serial8250_rx_chars tty: serial: 8250: omap: convert to using cyclic transfers tty: serial: 8250: omap: consume spurious interrupts drivers/dma/edma.c | 25 +- drivers/tty/serial/8250/8250.h | 2 + drivers/tty/serial/8250/8250_fsl.c | 2 +- drivers/tty/serial/8250/8250_omap.c | 430 ++++++++++++++++++++++++----------- drivers/tty/serial/8250/8250_port.c | 9 +- include/linux/serial_8250.h | 3 +- 6 files changed, 333 insertions(+), 138 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html