DMA Engine
[Prev Page][Next Page]
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 2/5] dmaengine: sun6i: Fix impossible settings of burst and bus width
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] dmaengine: sun6i: Fix the access of the IRQ register
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: Fix some race conditions in residue calculation
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 5/5] dmaengine: sun6i: Add cyclic capability
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH 2/5] dmaengine: sun6i: Fix impossible settings of burst and bus width
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [PATCH 1/5] dmaengine: sun6i: Fix the access of the IRQ register
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [PATCH v5 3/9] dma-mapping: add dma_{map,unmap}_resource
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: [PATCH 4/5] dmaengine: sun6i: Set default values to burst and bus width
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 2/5] dmaengine: sun6i: Fix impossible settings of burst and bus width
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 1/5] dmaengine: sun6i: Fix the access of the IRQ register
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v5 3/9] dma-mapping: add dma_{map,unmap}_resource
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 5/9] dma: qcom_hidma: implement lower level hardware interface
- From: Okaya@xxxxxxxxxxxxxx
- Re: [PATCH] dmaengine: IOATDMA: revise channel reset workaround on CB3.3 platforms
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 4/9] dma: add Qualcomm Technologies HIDMA channel driver
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 3/9] dma: add Qualcomm Technologies HIDMA management driver
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 2/9] dma: hidma: Add Device Tree binding
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 1/9] dma: qcom_bam_dma: move to qcom directory
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 5/9] dma: qcom_hidma: implement lower level hardware interface
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- [PATCH] dmaengine: IOATDMA: revise channel reset workaround on CB3.3 platforms
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- Re: [PATCH 3/5] dmaengine: sun6i: Add 4 as a possible bust value
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 3/9] dma-mapping: add dma_{map,unmap}_resource
- From: "Niklas S??derlund" <niklas.soderlund@xxxxxxxxxxxx>
- [PATCH v2 2/2] dmaengine: omap-dma: Do not suppress interrupts for memcpy
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 1/2] dmaengine: omap-dma: Fix polled channel completion detection and handling
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 0/2] dmaengine: omap-dma: Fix polled completion
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [RESEND PATCH] dmaengine: at_xdmac: fix residue computation
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- [PATCH 1/3 v3] dmaengine: pl330: cleanup quirk pass code
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 3/3 v3] dmaengine: pl330: make cyclic transfer free runnable
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 2/3 v3] dmaengine: pl330: don't emit code for one iteration loop
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Cleanups and improvenments for pl330 v3
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 2/3 v2] dmaengine: pl330: don't emit code for one iteration loop
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 3/3 v2] dmaengine: pl330: make cyclic transfer free runnable
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 1/3 v2] dmaengine: pl330: cleanup quirk pass code
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 3/5] dmaengine: sun6i: Add 4 as a possible bust value
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- [PATCH 5/5] dmaengine: sun6i: Add cyclic capability
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- [PATCH 2/5] dmaengine: sun6i: Fix impossible settings of burst and bus width
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- [PATCH 4/5] dmaengine: sun6i: Set default values to burst and bus width
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- [PATCH 1/5] dmaengine: sun6i: Fix the access of the IRQ register
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- [PATCH 0/5] dmaengine: sun6i: Fixes and upgrade for audio transfers
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- [RESEND PATCH] dmaengine: at_xdmac: fix residue computation
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH] dmaengine:fsldma: fix memory leak
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [linux-sunxi] Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [linux-sunxi] Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: LABBE Corentin <clabbe.montjoie@xxxxxxxxx>
- Re: [PATCH 4/7] scatterlist: add sg_alloc_table_from_buf() helper
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/7] scatterlist: add sg_alloc_table_from_buf() helper
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: Fix some race conditions in residue calculation
- From: "Jon Medhurst (Tixy)" <tixy@xxxxxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH 5/7] mtd: provide helper to prepare buffers for DMA operations
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 5/7] mtd: provide helper to prepare buffers for DMA operations
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: Fix some race conditions in residue calculation
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
- [PATCH 5/7] mtd: provide helper to prepare buffers for DMA operations
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/7] mtd: nand: sunxi: make cur_off parameter optional in extra oob helpers
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/7] scatterlist: add sg_alloc_table_from_buf() helper
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 6/7] mtd: nand: sunxi: add support for DMA assisted operations
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/7] mtd: nand: sunxi: move some ECC related operations to their own functions
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 7/7] mtd: nand: sunxi: update DT bindings
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/7] mtd: nand: sunxi: make OOB retrieval optional
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/7] mtd: nand: sunxi: add support for DMA operations
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: Fix some race conditions in residue calculation
- From: "Jon Medhurst (Tixy)" <tixy@xxxxxxxxxx>
- Re: [linux-sunxi] Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [linux-sunxi] Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Priit Laes <plaes@xxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [linux-sunxi] Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCHv2 5/8] ARM: dts: imx6-tx6: remove container node around pinctrl nodes
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- [PATCHv2 7/8] ARM: dts: imx6: add support for more Ka-Ro electronics modules
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- [PATCHv2 8/8] ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- [PATCHv2 4/8] ARM: dts: imx6-tx6: disable the spi node by default
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- [PATCHv2 6/8] ARM: dts: imx6qdl-tx6: add mdio node for ethernet phy
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- [PATCHv2 0/8] ARM: dts: update Ka-Ro i.MX6 module support
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- [PATCHv2 3/8] ARM: dts: imx6-tx6: remove regulator bus
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- [PATCHv2 2/8] ARM: dts: imx6-tx6: cleanup; no functional change
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- [PATCHv2 1/8] ARM: dts: imx6-tx6: Relicense the Ka-Ro DT files under GPLv2/X11
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH] dmaengine:fsldma: fix memory leak
- From: <xuelin.shi@xxxxxxx>
- Re: [PATCH v5 3/9] dma-mapping: add dma_{map,unmap}_resource
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Eric Auger <eric.auger@xxxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: Fix some race conditions in residue calculation
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: Cleanups and improvenments for pl330
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- [PATCH v5 4/9] arm: dma-mapping: add {map,unmap}_resource for iommu ops
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v5 5/9] dmaengine: rcar-dmac: slave address are physical
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v5 8/9] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v5 6/9] dmaengine: rcar-dmac: group slave configuration
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v5 7/9] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v5 0/9] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v5 3/9] dma-mapping: add dma_{map,unmap}_resource
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v5 1/9] iommu: Add MMIO mapping type
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v5 9/9] ARM: dts: r8a7791: add iommus to dmac0 and dmac1
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v5 2/9] dma-mapping: add {map,unmap}_resource to dma_map_ops
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- Re: [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties
- From: Eric Anholt <eric@xxxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: [linux-sunxi] [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Emilio López <emilio@xxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
- Re: [TRIVIAL PATCH] treewide: Remove unnecessary 0x prefixes before %pa extension uses
- From: Ross Zwisler <ross.zwisler@xxxxxxxxxxxxxxx>
- Re: [linux-sunxi] [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [linux-sunxi] [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Priit Laes <plaes@xxxxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [TRIVIAL PATCH] treewide: Remove unnecessary 0x prefixes before %pa extension uses
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- RE: [TRIVIAL PATCH] treewide: Remove unnecessary 0x prefixes before %pa extension uses
- From: "Bounine, Alexandre" <Alexandre.Bounine@xxxxxxx>
- [PATCH] dma: sun4i: expose block size and wait cycle configuration to DMA users
- From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [TRIVIAL PATCH] treewide: Remove unnecessary 0x prefixes before %pa extension uses
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
- Re: [PATCH v4 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Eric Auger <eric.auger@xxxxxxxxxx>
- [GIT PULL] dmaengine updates for 4.5-rc7
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- [PATCH v3 11/11] dmaengine: bcm2835: expose dma registers via debugfs
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 10/11] dmaengine: bcm2835: add dma_memcopy support to bcm2835-dma
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 09/11] dmaengine: bcm2835: add slave_sg support to bcm2835-dma
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 08/11] dmaengine: bcm2835: limit max length based on channel type
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 07/11] dmaengine: bcm2835: move controlblock chain generation into separate method
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 06/11] dmaengine: bcm2835: move cyclic member from bcm2835_chan into bcm2835_desc
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 05/11] dmaengine: bcm2835: add additional defines for DMA-registers
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 04/11] ARM: bcm2835: dt: add bindings for shared interrupt properties
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 03/11] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 02/11] dmaengine: bcm2835: remove unnecessary masking of dma channels
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 01/11] dmaengine: bcm2835: set residue_granularity field
- From: kernel@xxxxxxxxxxxxxxxx
- [PATCH v3 00/11] dmaengine: bcm2835: bugfix + enhancement of driver
- From: kernel@xxxxxxxxxxxxxxxx
- Re: [TRIVIAL PATCH] treewide: Remove unnecessary 0x prefixes before %pa extension uses
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
- [TRIVIAL PATCH] treewide: Remove unnecessary 0x prefixes before %pa extension uses
- From: Joe Perches <joe@xxxxxxxxxxx>
- Re: [PATCH ] dmaengine: tegra: Move of_device_id table near to its user
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dmaengine: xilinx_vdma: Remove unnecessary variable initializations
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 06/14] dma: sirf: use __maybe_unused to hide pm functions
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v2 00/15] Fixes / cleanups in dw_dmac (affects on few subsystems)
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH ] dmaengine: tegra: Move of_device_id table near to its user
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V2] dma: tegra: don't open code of_device_get_match_data()
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH 1/1] dma: tegra: don't open code of_device_get_match_data()
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Eric Auger <eric.auger@xxxxxxxxxx>
- [PATCH] dmaengine: xilinx_vdma: Remove unnecessary variable initializations
- From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
- RE: [PATCH v3 4/4] dmaengine: xilinx_vdma: Use readl_poll_timeout instead of do while loop's
- From: Appana Durga Kedareswara Rao <appana.durga.rao@xxxxxxxxxx>
- Re: [PATCH v2] dma: rcar-dmac: clear pertinence number of channels
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v2] dmaengine: pxa_dma: fix cyclic transfers
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- RE: [PATCH v3 1/4] dmaengine: xilinx_vdma: Improve SG engine handling
- From: Appana Durga Kedareswara Rao <appana.durga.rao@xxxxxxxxxx>
- Re: [PATCH] dmaengine: sh: shdmac: don't open code of_device_get_match_data()
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V2] dma: tegra: don't open code of_device_get_match_data()
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 1/1] dma: tegra: don't open code of_device_get_match_data()
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dmaengine: qcom_bam_dma: Make driver work for BE
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 2/3] dmaengine: sun4i: support module autoloading
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [patch] dma/mic_x100_dma: IS_ERR() vs PTR_ERR() typo
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v2] dmaengine: pxa_dma: fix cyclic transfers
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v3 1/4] dmaengine: xilinx_vdma: Improve SG engine handling
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v3 4/4] dmaengine: xilinx_vdma: Use readl_poll_timeout instead of do while loop's
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [rtc-linux] Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [rtc-linux] [RFC 06/15] pinctrl: rockchip: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [rtc-linux] [RFC 07/15] pinctrl: mvebu: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [rtc-linux] [RFC 12/15] soc: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [rtc-linux] [RFC 13/15] staging: media: omap4iss: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [rtc-linux] Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [rtc-linux] Re: [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [rtc-linux] Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozłowski <k.kozlowski.k@xxxxxxxxx>
- Re: [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 06/14] dma: sirf: use __maybe_unused to hide pm functions
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [rtc-linux] Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [rtc-linux] Re: [RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [rtc-linux] Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [RFC 14/15] usb: xhci: mtk: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 10/15] net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 01/15] clocksource: atmel: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 02/15] dmaengine: nxp: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 03/15] hwspinlock: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 05/15] phy: hi6220: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2] dma: rcar-dmac: clear pertinence number of channels
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v2] dma: rcar-dmac: clear pertinence number of channels
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [PATCH] dmaengine: rcar-dmac: clear pertinence number of channels
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [RFC 00/15] tree-wide: mfd: syscon: Fix unmet ioremap dependency
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 01/15] clocksource: atmel: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 02/15] dmaengine: nxp: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 03/15] hwspinlock: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 05/15] phy: hi6220: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 06/15] pinctrl: rockchip: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 07/15] pinctrl: mvebu: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 10/15] net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 13/15] staging: media: omap4iss: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 12/15] soc: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 14/15] usb: xhci: mtk: Add missing MFD_SYSCON dependency on HAS_IOMEM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [PATCH] dmaengine: rcar-dmac: clear pertinence number of channels
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [PATCH 06/14] dma: sirf: use __maybe_unused to hide pm functions
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH 00/14] drivers: use __maybe_unused to hide pm functions
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH 06/14] dma: sirf: use __maybe_unused to hide pm functions
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH V2] dma: tegra: don't open code of_device_get_match_data()
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH] dmaengine: sh: shdmac: don't open code of_device_get_match_data()
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: rcar_sata DMA warnings on Salvator-X
- From: Dirk Behme <dirk.behme@xxxxxxxxx>
- Re: rcar_sata DMA warnings on Salvator-X
- From: Tejun Heo <tj@xxxxxxxxxx>
- [PATCH] dmaengine: sh: shdmac: don't open code of_device_get_match_data()
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] dma: tegra: don't open code of_device_get_match_data()
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 1/1] dma: tegra: don't open code of_device_get_match_data()
- From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
- Re: [PATCH v2] dmaengine: pl330: fix to support the burst mode
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] asm-generic: remove old nonatomic-io wrapper files
- From: Yisen Zhuang <Yisen.zhuang@xxxxxxxxxx>
- Re: [PATCH] asm-generic: remove old nonatomic-io wrapper files
- From: Simon Horman <simon.horman@xxxxxxxxxxxxx>
- [PATCH] dmaengine: qcom_bam_dma: Make driver work for BE
- From: Andy Gross <andy.gross@xxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: musb: sunxi: support module autoloading
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH 2/3] dmaengine: sun4i: support module autoloading
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH 1/3] [media] rc: sunxi-cir: support module autoloading
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
- Re: [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: rcar_sata DMA warnings on Salvator-X
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [patch] dma/mic_x100_dma: IS_ERR() vs PTR_ERR() typo
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] asm-generic: remove old nonatomic-io wrapper files
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Francois Romieu <romieu@xxxxxxxxxxxxx>
- Re: [PATCH] asm-generic: remove old nonatomic-io wrapper files
- From: Christoph Hellwig <hch@xxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Mike Galbraith <umgwanakikbuti@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: Softirq priority inversion from "softirq: reduce latencies"
- From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
- Softirq priority inversion from "softirq: reduce latencies"
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] dmaengine: pxa_dma: fix cyclic transfers
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V14 9/9] vfio, platform: add QTI HIDMA reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V14 9/9] vfio, platform: add QTI HIDMA reset driver
- From: Eric Auger <eric.auger@xxxxxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Eric Auger <eric.auger@xxxxxxxxxx>
- Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
- From: Timur Tabi <timur@xxxxxxxxxxxxxx>
- Re: [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH] asm-generic: remove old nonatomic-io wrapper files
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH v3 4/4] dmaengine: xilinx_vdma: Use readl_poll_timeout instead of do while loop's
- From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
- [PATCH v3 3/4] dmaengine: xilinx_vdma: Fix issues with non-parking mode
- From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
- [PATCH v3 1/4] dmaengine: xilinx_vdma: Improve SG engine handling
- From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
- [PATCH v3 2/4] dmaengine: xilinx_vdma: Simplify spin lock handling
- From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
- Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: RFC: Support DMA timeout interrupt for UART Rx
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: rcar_sata DMA warnings on Salvator-X
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: rcar_sata DMA warnings on Salvator-X
- From: Tejun Heo <tj@xxxxxxxxxx>
- Re: rcar_sata DMA warnings on Salvator-X
- From: Tejun Heo <tj@xxxxxxxxxx>
- [PATCH] dmaengine: omap-dma: Do not call omap_dma_callback() from tx_status()
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2] dmaengine: pl330: fix to support the burst mode
- From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
- Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
- From: Caesar Wang <caesar.upstream@xxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: fix to support the brust mode
- From: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: fix to support the brust mode
- From: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Sekhar Nori <nsekhar@xxxxxx>
- [PATCH] dmaengine: pl330: Fix some race conditions in residue calculation
- From: "Jon Medhurst (Tixy)" <tixy@xxxxxxxxxx>
- Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- rcar_sata DMA warnings on Salvator-X
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [RESEND PATCH V7 4/6] i2c: qup: Add bam dma capabilities
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
- From: Caesar Wang <caesar.upstream@xxxxxxxxx>
- [PATCH] dmaengine: pl330: fix to support the brust mode
- From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] dmaengine: mmp-pdma: add number of requestors
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
- From: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- RE: [PATCH v2 4/4] dmaengine: xilinx_vdma: Improve channel idle checking
- From: Appana Durga Kedareswara Rao <appana.durga.rao@xxxxxxxxxx>
- RE: [PATCH v2 2/4] dmaengine: xilinx_vdma: Simplify spin lock handling
- From: Appana Durga Kedareswara Rao <appana.durga.rao@xxxxxxxxxx>
- Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v2 4/4] dmaengine: xilinx_vdma: Improve channel idle checking
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v2 2/4] dmaengine: xilinx_vdma: Simplify spin lock handling
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2 09/15] dmaengine: dw: keep entire platform data in struct dw_dma
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 01/15] dmaengine: dw: fix byte order of hw descriptor fields
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 02/15] dmaengine: dw: clear LLP_[SD]_EN bits in last descriptor of a chain
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 10/15] dmaengine: dw: pass platform data via struct dw_dma_chip
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 05/15] dmaengine: dw: set LMS field in descriptors
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 12/15] dmaengine: dw: move dwc->paused to dwc->flags
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 15/15] dmaengine: dw: set cdesc to NULL when free cyclic transfers
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 14/15] dmaengine: dw: move residue to a descriptor
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 08/15] dmaengine: dw: define counter variables as unsigned int
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 00/15] Fixes / cleanups in dw_dmac (affects on few subsystems)
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 11/15] dmaengine: dw: platform: use field-by-field initialization
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 07/15] dmaengine: dw: revisit data_width property
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 13/15] dmaengine: dw: move dwc->initialized to dwc->flags
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 04/15] dmaengine: dw: set src and dst master select according to xfer direction
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 06/15] dmaengine: dw: substitute dma_read_byaddr by dma_readl_native
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH][CFT]: dmaengine: make slave address physical
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH][CFT]: dmaengine: make slave address physical
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH][CFT]: dmaengine: make slave address physical
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH][CFT]: dmaengine: make slave address physical
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: John Ogness <john.ogness@xxxxxxxxxxxxx>
- Re: [PATCH][CFT]: dmaengine: make slave address physical
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH][CFT]: dmaengine: make slave address physical
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH][CFT]: dmaengine: make slave address physical
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- RE: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
- From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH][CFT]: dmaengine: make slave address physical
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- RE: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
- From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
- [RESEND PATCH V7 4/6] i2c: qup: Add bam dma capabilities
- From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH][CFT]: dmaengine: make slave address physical
- From: "Niklas Söderlund" <niklas.soderlund@xxxxxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: idma64: fix typo in WR_ISSUE_THD(x)
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH][CFT]: dmaengine: make slave address physical
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 3/4] dmaengine: xilinx_vdma: Fix issues with non-parking mode
- From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
- [PATCH v2 1/4] dmaengine: xilinx_vdma: Improve SG engine handling
- From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
- [PATCH v2 4/4] dmaengine: xilinx_vdma: Improve channel idle checking
- From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
- [PATCH v2 2/4] dmaengine: xilinx_vdma: Simplify spin lock handling
- From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
- RE: [PATCH] dmaengine: xilinx_vdma: Fix issues with non-parking mode
- From: Appana Durga Kedareswara Rao <appana.durga.rao@xxxxxxxxxx>
- Re: [PATCH] dmaengine: xilinx_vdma: Fix issues with non-parking mode
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: idma64: fix typo in WR_ISSUE_THD(x)
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: acpi-dma: align debug message with flow
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCHv2 1/1] dmaengine: enable mxs-dma for imx6ul
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dmaengine: edma: Fetch echan->edesc while holding lock in edma_comletion_handler
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v2] dmaengine: edma: Implement device_synchronize callback
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v2] dmaengine: omap-dma: Implement device_synchronize callback
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- [PATCH 3/3] usb: musb: sunxi: support module autoloading
- From: Emilio López <emilio@xxxxxxxxxxxxx>
- [PATCH 1/3] [media] rc: sunxi-cir: support module autoloading
- From: Emilio López <emilio@xxxxxxxxxxxxx>
- [PATCH 2/3] dmaengine: sun4i: support module autoloading
- From: Emilio López <emilio@xxxxxxxxxxxxx>
- [PATCH][CFT]: dmaengine: make slave address physical
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [GIT PULL]: dmaengine updates for 4.5-rc5
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- [PATCH] dmaengine: at_xdmac: fix residue computation
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [PATCH] dmaengine: pl330: initialize tasklet after spin_unlock_irqrestore
- From: Anand Moon <linux.amoon@xxxxxxxxx>
- Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH v2] dma: mv_xor_v2: new driver
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/4] dma: mmp_pdma: Add the #dma-requests DT property documentation
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] WIP: at_xdmac: fix residue computation
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH] WIP: at_xdmac: fix residue computation
- From: David Engraf <david.engraf@xxxxxxxxx>
- [PATCH 2/4] dmaengine: pl330: cleanup brst_len usage
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 4/4] dmaengine: pl330: make cyclic transfer free runnable
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 1/4] dmaengine: pl330: cleanup quirk pass code
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 3/4] dmaengine: pl330: don't emit code for one iteration loop
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Cleanups and improvenments for pl330
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH] WIP: at_xdmac: fix residue computation
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH V2 7/8] dmaengine: bcm2835: add slave_sg support to bcm2835-dma
- From: Eric Anholt <eric@xxxxxxxxxx>
- Re: [PATCH V2 5/8] dmaengine: bcm2835: move cyclic member from bcm2835_chan into bcm2835_desc
- From: Eric Anholt <eric@xxxxxxxxxx>
- Re: [PATCH V2 4/8] dmaengine: bcm2835: add additional defines for DMA-registers
- From: Eric Anholt <eric@xxxxxxxxxx>
- Re: [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.
- From: Eric Anholt <eric@xxxxxxxxxx>
- Re: [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method
- From: Eric Anholt <eric@xxxxxxxxxx>
- Re: [PATCH v8 6/7] mtd: nand: gpmi: correct bitflip for erased NAND page
- From: Han Xu <xhnjupt@xxxxxxxxx>
- Re: [PATCH] at_xdmac fix status read in cyclic mode
- From: David Engraf <david.engraf@xxxxxxxxx>
- Re: [PATCH] at_xdmac fix status read in cyclic mode
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH] at_xdmac fix status read in cyclic mode
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- [PATCH] at_xdmac fix status read in cyclic mode
- From: David Engraf <david.engraf@xxxxxxxxx>
- Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- [PATCH v2] dmaengine: pxa_dma: fix cyclic transfers
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v4 4/8] arm: dma-mapping: add {map,unmap}_resource for iommu ops
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v4 0/8] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v4 5/8] dmaengine: rcar-dmac: group slave configuration
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v4 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- Re: [PATCH] dmaengine: use phys_addr_t for slave configuration
- From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
- [PATCH v4 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v4 2/8] dma-mapping: add {map,unmap}_resource to dma_map_ops
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v4 8/8] ARM: dts: r8a7791: add iommus to dmac0 and dmac1
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v4 3/8] dma-mapping: add dma_{map,unmap}_resource
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v4 1/8] iommu: Add MMIO mapping type
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH] dmaengine: pxa_dma: fix cyclic transfers
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH v3 1/8] iommu: Add MMIO mapping type
- From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
- Re: [PATCH v3 1/8] iommu: Add MMIO mapping type
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [PATCH v3 1/8] iommu: Add MMIO mapping type
- From: "Niklas Söderlund" <niklas.soderlund@xxxxxxxxxxxx>
- [PATCH] dmaengine: xilinx_vdma: Fix issues with non-parking mode
- From: Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
- [PATCH v1 1/1] dmaengine: hsu: set HSU_CH_MTSR to memory width
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 1/1] dmaengine: idma64: fix typo in WR_ISSUE_THD(x)
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 1/1] dmaengine: acpi-dma: align debug message with flow
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: acpi-dma: truly print message when appropriate
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 1/4] dma: mmp_pdma: Add the #dma-requests DT property documentation
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 2/4] dmaengine: mmp-pdma: add number of requestors
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 3/4] ARM: pxa: add the number of DMA requestor lines
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 4/4] dmaengine: pxa_dma: fix the maximum requestor line
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 1/4] dma: mmp_pdma: Add the #dma-requests DT property documentation
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH 4/4] dmaengine: pxa_dma: fix the maximum requestor line
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH] dmaengine: use phys_addr_t for slave configuration
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 0/3] Allocate DMA descriptors with contig DMA memory
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 4/4] dmaengine: pxa_dma: fix the maximum requestor line
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dmaengine: use phys_addr_t for slave configuration
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 4/4] dmaengine: pxa_dma: fix the maximum requestor line
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: idma64: clear LLP_[SD]_EN bits in last descriptor
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 4/4] dmaengine: pxa_dma: fix the maximum requestor line
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: idma64: clear LLP_[SD]_EN bits in last descriptor
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- [PATCH] dma: mv_xor_v2: fix platform_no_drv_owner.cocci warnings
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH] dma: mv_xor_v2: new driver
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH] dma: mv_xor_v2: new driver
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
- From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] dma: mmp_pdma: Add the #requestors DT property documentation
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH V7 1/6] i2c: qup: Change qup_wait_writeready function to use for all timeouts
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH V7 2/6] i2c: qup: Add V2 tags support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH 1/4] dma: mmp_pdma: Add the #requestors DT property documentation
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH 4/4] dmaengine: pxa_dma: fix the maximum requestor line
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH 3/4] ARM: pxa: add the number of DMA requestor lines
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH 2/4] dmaengine: mmp-pdma: add number of requestors
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH 0/4] Fix pxa dma requestor lines
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH 1/4] dma: mmp_pdma: Add the #requestors DT property documentation
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 1/8] iommu: Add MMIO mapping type
- From: Robin Murphy <robin.murphy@xxxxxxx>
- RE: [PATCH v2] IOATDMA: fix timer code that continues to restart channels during idle
- From: "Jiang, Dave" <dave.jiang@xxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
- From: Måns Rullgård <mans@xxxxxxxxx>
- [PATCHv2 1/1] dmaengine: enable mxs-dma for imx6ul
- From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
- [PATCH] dmaengine: edma: Fetch echan->edesc while holding lock in edma_comletion_handler
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v2] dmaengine: edma: Implement device_synchronize callback
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: John Ogness <john.ogness@xxxxxxxxxxxxx>
- Re: [PATCH v2] dmaengine: edma: Implement device_synchronize callback
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] dmaengine: edma: Implement device_synchronize callback
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH] dmaengine: omap-dma: Implement device_synchronize callback
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] dmaengine: edma: Implement device_synchronize callback
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- [PATCH v2] dmaengine: edma: Implement device_synchronize callback
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2] dmaengine: omap-dma: Implement device_synchronize callback
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] dmaengine: edma: Implement device_synchronize callback
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] dmaengine: omap-dma: Implement device_synchronize callback
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] dmaengine: omap-dma: Implement device_synchronize callback
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] dmaengine: edma: Implement device_synchronize callback
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: commit 271e1b86e691 is breaking DMA uart on SoCFPGA
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v2] IOATDMA: fix timer code that continues to restart channels during idle
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v3 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
- From: "Niklas Söderlund" <niklas.soderlund@xxxxxxxxxxxx>
- Re: [PATCH v3 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 5/8] dmaengine: rcar-dmac: group slave configuration
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 4/8] arm: dma-mapping: add {map,unmap}_resource for iommu ops
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/8] dma-mapping: add {map,unmap}_resource to dma_map_ops
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/8] iommu: Add MMIO mapping type
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- commit 271e1b86e691 is breaking DMA uart on SoCFPGA
- From: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH 3/3] dmaengine: IOATDMA: Allocate DMA descriptor ring in contig DMA memory
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- [PATCH 2/3] dmaengine: IOATDMA: Removing descriptor ring reshape
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- [PATCH 1/3] dmaengine: IOATDMA: Convert pci_pool_* to dma_pool_*
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- [PATCH 0/3] Allocate DMA descriptors with contig DMA memory
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- Re: [PATCH v3 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH/RFC] dmaengine: sh: Use ARCH_RENESAS
- From: Simon Horman <horms@xxxxxxxxxxxx>
- [PATCH v1 1/1] dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/8] dma-mapping: add {map,unmap}_resource to dma_map_ops
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [PATCH v3 3/8] dma-mapping: add dma_{map,unmap}_resource
- From: Robin Murphy <robin.murphy@xxxxxxx>
- [PATCH v3 8/8] ARM: dts: r8a7791: add iommus to dmac0 and dmac1
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v3 7/8] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v3 6/8] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v3 5/8] dmaengine: rcar-dmac: group slave configuration
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v3 4/8] arm: dma-mapping: add {map,unmap}_resource for iommu ops
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v3 3/8] dma-mapping: add dma_{map,unmap}_resource
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v3 2/8] dma-mapping: add {map,unmap}_resource to dma_map_ops
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v3 0/8] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH v3 1/8] iommu: Add MMIO mapping type
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- Re: [PATCH v2] IOATDMA: fix timer code that continues to restart channels during idle
- From: "Jiang, Dave" <dave.jiang@xxxxxxxxx>
- Re: [PATCH] dmaengine: use phys_addr_t for slave configuration
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: pxa_dma: fix the maximum requestor line
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH/RFC] dmaengine: sh: Use ARCH_RENESAS
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: pxa_dma: fix the maximum requestor line
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- RE: [PATCH RESEND 1/2] dmaengine: added MIC X200 Coprocessor DMA driver
- From: "Lawrynowicz, Jacek" <jacek.lawrynowicz@xxxxxxxxx>
- Re: [PATCH] dmaengine: pxa_dma: fix the maximum requestor line
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH] dmaengine: pxa_dma: fix the maximum requestor line
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v7 8/9] dmaengine: pl330: add max burst for dmaengine
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v7 7/9] dmaengine: core: expose max burst capability to clients
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v7 3/9] dmaengine: pl330: add quirk for broken no flushp
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v7 1/9] dmaengine: pl330: support burst mode for dev-to-mem and mem-to-dev transmit
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
- From: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
- Re: [PATCH v4] dmaengine: edma: fix residue race for cyclic
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH] dmaengine: pxa_dma: fix the maximum requestor line
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
- From: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
- Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH RESEND 1/2] dmaengine: added MIC X200 Coprocessor DMA driver
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 1/6] dma: enable mxs-dma for imx6ul
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v4] dmaengine: edma: fix residue race for cyclic
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: dw: pci: add ID for WildcatPoint PCH
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: idma64: clear LLP_[SD]_EN bits in last descriptor
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v1 1/1] dmaengine: acpi-dma: truly print message when appropriate
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: dma engine driver
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- dma engine driver
- From: Hauke Mehrtens <hauke@xxxxxxxxxx>
- Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- RE: [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
- From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
- [PATCH V14 1/9] dma: qcom_bam_dma: move to qcom directory
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V14 2/9] dma: hidma: Add Device Tree binding
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V14 3/9] dma: add Qualcomm Technologies HIDMA management driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V14 4/9] dma: add Qualcomm Technologies HIDMA channel driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V14 6/9] dma: qcom_hidma: add debugfs hooks
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V14 5/9] dma: qcom_hidma: implement lower level hardware interface
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V14 7/9] dma: qcom_hidma: add support for object hierarchy
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V14 9/9] vfio, platform: add QTI HIDMA reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH RESEND 1/2] dmaengine: added MIC X200 Coprocessor DMA driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH RESEND 2/2] MAINTAINERS: update for mic
- From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
- [PATCH RESEND 1/2] dmaengine: added MIC X200 Coprocessor DMA driver
- From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
- [PATCH RESEND 0/2] Enable DMA driver for MIC X200 Coprocessor
- From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
- [PATCH 2/2] MAINTAINERS: update for mic
- From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
- [PATCH 1/2] dmaengine: added MIC X200 Coprocessor DMA driver
- From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
- [PATCH 0/2] Enable DMA driver for MIC X200 Coprocessor
- From: Jacek Lawrynowicz <jacek.lawrynowicz@xxxxxxxxx>
- Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] dma-mapping: add dma_{map,unmap}_page_attrs
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] dma-mapping: add dma_{map,unmap}_page_attrs
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v2 11/15] dmaengine: pch_dma: Allow build on MIPS platforms
- From: Paul Burton <paul.burton@xxxxxxxxxx>
- Re: [PATCH] dmaengine: use phys_addr_t for slave configuration
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH/RFC] dmaengine: sh: Use ARCH_RENESAS
- From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v8 6/7] mtd: nand: gpmi: correct bitflip for erased NAND page
- From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
- Re: [PATCH 4/6] ARM: dts: imx6: change TX6 module names due to new HW revision
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [PATCH 3/6] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [PATCH 2/6] ARM: dts: imx6: use correct mclk frequency for audio codec
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [PATCH 1/6] dma: enable mxs-dma for imx6ul
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
- From: Timur Tabi <timur@xxxxxxxxxxxxxx>
- Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
- From: Eric Auger <eric.auger@xxxxxxxxxx>
- Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
- From: Eric Auger <eric.auger@xxxxxxxxxx>
- Re: [PATCH V13 10/10] vfio, platform: add QTI HIDMA reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH V13 10/10] vfio, platform: add QTI HIDMA reset driver
- From: Eric Auger <eric.auger@xxxxxxxxxx>
- Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4] dmaengine: edma: fix residue race for cyclic
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v7 0/9] Fix broken DMAFLUSHP on Rockchips platform
- From: Caesar Wang <caesar.upstream@xxxxxxxxx>
- Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH v2] IOATDMA: fix timer code that continues to restart channels during idle
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH V2 2/8] dmaengine: bcm2835: remove unnecessary masking of dma channels
- From: Eric Anholt <eric@xxxxxxxxxx>
- [PATCH V13 02/10] dma: hidma: Add Device Tree binding
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V13 01/10] dma: qcom_bam_dma: move to qcom directory
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V13 04/10] dma: add Qualcomm Technologies HIDMA channel driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V13 05/10] dma: qcom_hidma: implement lower level hardware interface
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V13 03/10] dma: add Qualcomm Technologies HIDMA management driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V13 06/10] dma: qcom_hidma: add debugfs hooks
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V13 07/10] dma: qcom_hidma: add support for object hierarchy
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V13 08/10] dma: qcom_hidma: read the channel id from HW
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V13 09/10] vfio, platform: add support for ACPI while detecting the reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V13 10/10] vfio, platform: add QTI HIDMA reset driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- [PATCH V13 00/10] dma: add Qualcomm Technologies HIDMA driver
- From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: John Ogness <john.ogness@xxxxxxxxxxxxx>
- [PATCH v1 1/1] dmaengine: dw: pci: add ID for WildcatPoint PCH
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] dmaengine: qcom_bam_dma: use correct pipe FIFO size
- From: Andy Gross <andy.gross@xxxxxxxxxx>
- Re: [PATCH V2 1/8] dmaengine: bcm2835: set residue_granularity field
- From: Eric Anholt <eric@xxxxxxxxxx>
- Re: [PATCH] dmaengine: edma: Remove dynamic TPTC power management feature
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v4] dmaengine: edma: fix residue race for cyclic
- From: John Ogness <john.ogness@xxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: edma: Remove dynamic TPTC power management feature
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- RE: [PATCH V7 0/6] i2c: qup: Add support for v2 tags and bam dma
- From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
- RE: [PATCH V7 3/6] i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
- From: "Sricharan" <sricharan@xxxxxxxxxxxxxx>
- Re: [PATCH v3] ARM: edma: fix residue race for cyclic
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH] dmaengine: edma: Remove dynamic TPTC power management feature
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3] ARM: edma: fix residue race for cyclic
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] dmaengine: edma: Remove dynamic TPTC power management feature
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v1 1/1] dmaengine: idma64: clear LLP_[SD]_EN bits in last descriptor
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] serial: omap: robustify for high speed transfers
- From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
- [RFC] pl330: Interleaved (2D) Transfers
- From: Jeremy Trimble <jeremy.trimble@xxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/6] dma: enable mxs-dma for imx6ul
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 00/15] dmaengine: dw: various fixes and cleanups
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH 00/15] dmaengine: dw: various fixes and cleanups
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
- From: Måns Rullgård <mans@xxxxxxxxx>
- Re: [PATCH v2 1/5] dma-mapping: add dma_{map,unmap}_page_attrs
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 11/15] dmaengine: dw: platform: use field-by-field initialization
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
- From: Vineet Gupta <Vineet.Gupta1@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH/RFC] dmaengine: rcar-dmac: Use CAE/CAIR instead of error IRQ
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] dma-mapping: add dma_{map,unmap}_page_attrs
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] dmaengine: rcar-dmac: add iommu support for slave transfers
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/5] ARM: dts: r8a7790: add iommus to dmac0 and dmac1
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] dmaengine: rcar-dmac: Rename highmem/lowmem
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Måns Rullgård <mans@xxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Måns Rullgård <mans@xxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Hans-Christian Noren Egtvedt <egtvedt@xxxxxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Måns Rullgård <mans@xxxxxxxxx>
- Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Hans-Christian Noren Egtvedt <egtvedt@xxxxxxxxxxxx>
- [PATCH 04/15] dmaengine: dw: set src and dst master select according to xfer direction
- From: Mans Rullgard <mans@xxxxxxxxx>
- [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
- From: Mans Rullgard <mans@xxxxxxxxx>
- [PATCH 05/15] dmaengine: dw: set LMS field in descriptors
- From: Mans Rullgard <mans@xxxxxxxxx>
- [PATCH 06/15] dmaengine: dw: substitute dma_read_byaddr by dma_readl_native
- From: Mans Rullgard <mans@xxxxxxxxx>
- [PATCH 07/15] dmaengine: dw: revisit data_width property
- From: Mans Rullgard <mans@xxxxxxxxx>
- [PATCH 09/15] dmaengine: dw: keep entire platform data in struct dw_dma
- From: Mans Rullgard <mans@xxxxxxxxx>
- [PATCH 08/15] dmaengine: dw: define counter variables as unsigned int
- From: Mans Rullgard <mans@xxxxxxxxx>
[Index of Archives]
[Linux Kernel]
[Linux ARM (vger)]
[Linux ARM MSM]
[Linux Omap]
[Linux Arm]
[Linux Tegra]
[Fedora ARM]
[Linux for Samsung SOC]
[eCos]
[Linux PCI]
[Linux Fastboot]
[Gcc Help]
[Git]
[DCCP]
[IETF Announce]
[Security]
[Linux MIPS]
[Yosemite Campsites]