[PATCH 1/8] dmaengine: fsl-edma: Fix clock handling error paths

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently fsl-edma doesn't clk_disable_unprepare()
its clocks on error conditions. This patch adds a
fsl_disable_clocks helper for this, and also only
disables clocks which were enabled if encountering
an error whilst enabling clocks.

Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
---
 drivers/dma/fsl-edma.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c
index be2e62b..7208fc9 100644
--- a/drivers/dma/fsl-edma.c
+++ b/drivers/dma/fsl-edma.c
@@ -852,6 +852,14 @@ fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma
 	return 0;
 }
 
+static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma)
+{
+	int i;
+
+	for (i = 0; i < DMAMUX_NR; i++)
+		clk_disable_unprepare(fsl_edma->muxclk[i]);
+}
+
 static int fsl_edma_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -897,6 +905,10 @@ static int fsl_edma_probe(struct platform_device *pdev)
 
 		ret = clk_prepare_enable(fsl_edma->muxclk[i]);
 		if (ret) {
+			/* disable only clks which were enabled on error */
+			for (; i >= 0; i--)
+				clk_disable_unprepare(fsl_edma->muxclk[i]);
+
 			dev_err(&pdev->dev, "DMAMUX clk block failed.\n");
 			return ret;
 		}
@@ -952,6 +964,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
 	ret = dma_async_device_register(&fsl_edma->dma_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Can't register Freescale eDMA engine.\n");
+		fsl_disable_clocks(fsl_edma);
 		return ret;
 	}
 
@@ -959,6 +972,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Can't register Freescale eDMA of_dma.\n");
 		dma_async_device_unregister(&fsl_edma->dma_dev);
+		fsl_disable_clocks(fsl_edma);
 		return ret;
 	}
 
@@ -972,13 +986,10 @@ static int fsl_edma_remove(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct fsl_edma_engine *fsl_edma = platform_get_drvdata(pdev);
-	int i;
 
 	of_dma_controller_free(np);
 	dma_async_device_unregister(&fsl_edma->dma_dev);
-
-	for (i = 0; i < DMAMUX_NR; i++)
-		clk_disable_unprepare(fsl_edma->muxclk[i]);
+	fsl_disable_clocks(fsl_edma);
 
 	return 0;
 }
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux