Re: [PATCH 2/2] i2c: qup: Fixed the DMA segments length

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 09, 2016 at 06:14:31PM +0530, Abhishek Sahu wrote:
> 1. The current QCOM I2C driver code is failing for transfer length
> greater than 255. This is happening due to improper segments length
> as the I2C DMA segments can be maximum of 256 bytes.
> 
> 2. The transfer length tlen was being initialized with 0 for 256
> bytes, which is being passed for DMA mappings resulting in improper
> DMA mapping length.
> 
> This patch fixes the above said problems by initializing the block
> count with the values calculated in qup_i2c_set_blk_data and calculating
> the remaining length for last DMA segment. Also, the block data length
> need to be decremented after each transfer. Additionally, this patch
> corrects the tlen assignment for DMA mapping.
> 
> Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>

Applied to for-next, thanks!

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux