Linux Watchdog

• Thread Index

• RE: [PATCH] watchdog: xilinx: Add clock support
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCHv2] watchdog: xilinx: Add clock support
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• Re: [PATCH] watchdog: xilinx: Add clock support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: xilinx: Add clock support
  • From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
• [PATCH 1026/1285] Replace numeric parameter like 0444 with macro
  • From: Baole Ni <baolex.ni@xxxxxxxxx>
• [PATCH 1027/1285] Replace numeric parameter like 0444 with macro
  • From: Baole Ni <baolex.ni@xxxxxxxxx>
• [PATCH] watchdog: xilinx: Add clock support
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH v4] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [RFC 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_DEADLINE
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [RFC 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_DEADLINE
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v3] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Will Deacon <will.deacon@xxxxxxx>
• [PATCH v3] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [RFC 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_DEADLINE
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• Re: [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH] watchdog: gpio_wdt: Fix missing platform_set_drvdata() in gpio_wdt_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: gpio_wdt: Fix missing platform_set_drvdata() in gpio_wdt_probe()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH v9 5/9] acpi/arm64: Add GTDT table parse driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• [PATCH v10 2/8] clocksource/drivers/arm_arch_timer: Add a new enum for spi type
  • From: fu.wei@xxxxxxxxxx
• [PATCH v10 3/8] clocksource/drivers/arm_arch_timer: Improve printk relevant code
  • From: fu.wei@xxxxxxxxxx
• [PATCH v10 6/8] acpi/arm64: Add memory-mapped timer support in GTDT driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v10 8/8] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v10 7/8] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer
  • From: fu.wei@xxxxxxxxxx
• [PATCH v10 5/8] clocksource/drivers/arm_arch_timer: Simplify ACPI support code.
  • From: fu.wei@xxxxxxxxxx
• [PATCH v10 4/8] acpi/arm64: Add GTDT table parse driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v10 1/8] clocksource/drivers/arm_arch_timer: Move enums and defines to header file
  • From: fu.wei@xxxxxxxxxx
• [PATCH v10 0/8] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer
  • From: fu.wei@xxxxxxxxxx
• Re: [PATCH v9 5/9] acpi/arm64: Add GTDT table parse driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH v8 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH v8 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Will Deacon <will.deacon@xxxxxxx>
• [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: fu.wei@xxxxxxxxxx
• [PATCH v9 9/9] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v9 8/9] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer
  • From: fu.wei@xxxxxxxxxx
• [PATCH v9 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v9 6/9] clocksource/drivers/arm_arch_timer: Simplify ACPI support code.
  • From: fu.wei@xxxxxxxxxx
• [PATCH v9 5/9] acpi/arm64: Add GTDT table parse driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v9 1/9] clocksource/drivers/arm_arch_timer: Move enums and defines to header file
  • From: fu.wei@xxxxxxxxxx
• [PATCH v9 3/9] clocksource/drivers/arm_arch_timer: Improve printk relevant code
  • From: fu.wei@xxxxxxxxxx
• [PATCH v9 0/9] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer
  • From: fu.wei@xxxxxxxxxx
• [PATCH v9 2/9] clocksource/drivers/arm_arch_timer: Add a new enum for spi type
  • From: fu.wei@xxxxxxxxxx
• Re: [PATCH v8 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH v8 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] Documentation/watchdog: check return value for magic close
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH v8 5/9] acpi/arm64: Add GTDT table parse driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• [PATCH] watchdog: core: Clear WDOG_HW_RUNNING before calling the stop function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v2] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 5/9] acpi/arm64: Add GTDT table parse driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v8 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v2] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v2] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_DEADLINE
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: bcm2835_wdt: set WDOG_HW_RUNNING bit when appropriate
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_DEADLINE
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• Re: [PATCH 3/3] watchdog: bcm2835_wdt: set WDOG_HW_RUNNING bit when appropriate
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [PATCH v2] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v2] Documentation/watchdog: check return value for magic close
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] Documentation: Move samples from doc to samples/
  • From: Mahesh Khanwalkar <maheshkhanwalkar@xxxxxxxxx>
• Re: [PATCH v4] Documentation: Move samples from doc to samples/
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v4] Documentation: Move samples from doc to samples/
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH v7 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• [PATCH v8 1/9] clocksource/drivers/arm_arch_timer: Move enums and defines to header file
  • From: fu.wei@xxxxxxxxxx
• [PATCH v8 2/9] clocksource/drivers/arm_arch_timer: Add a new enum for spi type
  • From: fu.wei@xxxxxxxxxx
• [PATCH v8 3/9] clocksource/drivers/arm_arch_timer: Improve printk relevant code
  • From: fu.wei@xxxxxxxxxx
• [PATCH v8 5/9] acpi/arm64: Add GTDT table parse driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v8 6/9] clocksource/drivers/arm_arch_timer: Simplify ACPI support code.
  • From: fu.wei@xxxxxxxxxx
• [PATCH v8 9/9] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v8 8/9] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer
  • From: fu.wei@xxxxxxxxxx
• [PATCH v8 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v8 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  • From: fu.wei@xxxxxxxxxx
• [PATCH v8 0/9] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer
  • From: fu.wei@xxxxxxxxxx
• Re: Can't query Intel's iTCO watchdog reboot reason
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] Documentation/watchdog: check return value for magic close
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] Documentation/watchdog: check return value for magic close
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH -next] watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next] watchdog: core: Fix error handling of watchdog_dev_init()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next] watchdog: pic32-dmt: Remove .owner field for driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next] watchdog: pic32-wdt: Remove .owner field for driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: renesas-wdt: Add support for the r8a7796 wdt
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Documentation/watchdog: check return value for magic close
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: renesas-wdt: Add support for the r8a7796 wdt
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH -next] watchdog: pic32-wdt: Remove .owner field for driver
  • From: Wei Yongjun <weiyj_lk@xxxxxxx>
• [PATCH -next] watchdog: pic32-dmt: Remove .owner field for driver
  • From: Wei Yongjun <weiyj_lk@xxxxxxx>
• [PATCH -next] watchdog: core: Fix error handling of watchdog_dev_init()
  • From: Wei Yongjun <weiyj_lk@xxxxxxx>
• [PATCH -next] watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()
  • From: Wei Yongjun <weiyj_lk@xxxxxxx>
• [PATCH] Documentation/watchdog: check return value for magic close
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/2] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>
• [PATCH v4] Documentation: Move samples from doc to samples/
  • From: Mahesh Khanwalkar <maheshkhanwalkar@xxxxxxxxx>
• Re: [PATCH v3] Documentation: Move samples from doc to samples/
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v3] Documentation: Move samples from doc to samples/
  • From: Mahesh Khanwalkar <maheshkhanwalkar@xxxxxxxxx>
• Re: [PATCH v2] Documentation: Move samples from doc to samples/
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• [PATCH v2] Documentation: Move samples from doc to samples/
  • From: Mahesh Khanwalkar <maheshkhanwalkar@xxxxxxxxx>
• Re: [PATCH] Documentation: Move samples from doc to samples/
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] watchdog, sbsa_gwdt: Update SBSA watchdog with the new infrastructure of watchdog.
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Correct iTCO Watchdog for Apollo Lake
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• Re: Can't query Intel's iTCO watchdog reboot reason
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] watchdog: sbsa: Drop status function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 1/2] watchdog: Implement status function in watchdog core
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: tangox: Set max_hw_heartbeat_ms instead of max_timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 1/3] watchdog: change watchdog_need_worker logic
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v2 1/1] watchdog: add support for MCP78S chipset in nv_tco
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [RFC 1/3] watchdog: change watchdog_need_worker logic
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 2/3] watchdog: bcm2835_wdt: remove redundant ->set_timeout callback
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 1/3] watchdog: bcm2835_wdt: constify _ops and _info structures
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v3 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v3 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v3 1/3] watchdog: qcom: update device tree bindings
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v3 3/3] watchdog: qcom: configure BARK time in addition to BITE time
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v2] watchdog: da9063_wdt: don't trigger watchdog too fast
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 2/2] Documentation/watchdog: add support for magic close to watchdog-test
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 1/2] Documentation/watchdog: use stdout instead of stderr in watchdog-test
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v2 0/2] Correct iTCO Watchdog for Apollo Lake
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: Implement status function in watchdog core
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: Implement status function in watchdog core
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: pic32-dmt: Fix return value check in pic32_dmt_probe()
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 1/2] watchdog: ziirave_wdt: Correct I2C device id to fix module autoloading.
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: drop redundant 'default n' option for WATCHDOG_SYSFS
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH V4] watchdog: max77620: Add support for watchdog timer
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH V2] watchdog: f71808e_wdt: Add F81866 support
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: sirf: fix __iomem * warnings
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Implement status function in watchdog core
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 0/3] watchdog, sbsa_gwdt: Update SBSA watchdog with the new infrastructure of watchdog.
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: pcwd: Utilize the module_isa_driver macro
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [RFC 1/3] watchdog: change watchdog_need_worker logic
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 0/2] watchdog: Add Aspeed watchdog driver
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 0/7] watchdog: softdog: cleanups
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v2 1/2] MAINTAINERS: add entry for HPE watchdog driver
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: hpwdt: remove email address from doc
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [RFC 1/3] watchdog: change watchdog_need_worker logic
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v2] watchdog: Add a device managed API for watchdog_register_device()
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v2 1/1] watchdog: add support for MCP78S chipset in nv_tco
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] watchdog: add support for MCP78S chipset in nv_tco
  • From: Alexey Kunitskiy <alexey.kv@xxxxxxxxx>
• Re: [PATCH v2 1/1] watchdog: add support for MCP78S chipset in nv_tco
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] watchdog: add support for MCP78S chipset in nv_tco
  • From: Alexey Kunitskiy <alexey.kv@xxxxxxxxx>
• Re: Can't query Intel's iTCO watchdog reboot reason
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [1/1] watchdog: add support for MCP78S chipset in nv_tco
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Can't query Intel's iTCO watchdog reboot reason
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] watchdog: bcm2835_wdt: remove redundant ->set_timeout callback
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [RFC 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_DEADLINE
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] watchdog: bcm2835_wdt: remove redundant ->set_timeout callback
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: bcm2835_wdt: constify _ops and _info structures
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: bcm2835_wdt: set WDOG_HW_RUNNING bit when appropriate
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 1/1] watchdog: add support for MCP78S chipset in nv_tco
  • From: Alexey Kunitskiy <alexey.kv@xxxxxxxxx>
• [PATCH 3/3] watchdog: bcm2835_wdt: set WDOG_HW_RUNNING bit when appropriate
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [PATCH 2/3] watchdog: bcm2835_wdt: remove redundant ->set_timeout callback
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [PATCH 1/3] watchdog: bcm2835_wdt: constify _ops and _info structures
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [RFC 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_DEADLINE
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [PATCH v7 5/9] MAINTAINERS / ACPI: add the ARM64-specific ACPI Support maintainers
  • From: Fu Wei <fu.wei@xxxxxxxxxx>
• Re: [RFC 1/3] watchdog: change watchdog_need_worker logic
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [RFC 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_DEADLINE
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• [RFC 2/3] watchdog: introduce watchdog_worker_should_ping helper
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [RFC 0/3] watchdog: introduce open deadline
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [RFC 3/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_DEADLINE
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [RFC 1/3] watchdog: change watchdog_need_worker logic
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v7 5/9] MAINTAINERS / ACPI: add the ARM64-specific ACPI Support maintainers
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH v7 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v7 9/9] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v7 8/9] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer
  • From: fu.wei@xxxxxxxxxx
• [PATCH v7 6/9] clocksource/drivers/arm_arch_timer: Simplify ACPI support code.
  • From: fu.wei@xxxxxxxxxx
• [PATCH v7 4/9] acpi/arm64: Add GTDT table parse driver
  • From: fu.wei@xxxxxxxxxx
• [PATCH v7 5/9] MAINTAINERS / ACPI: add the ARM64-specific ACPI Support maintainers
  • From: fu.wei@xxxxxxxxxx
• [PATCH v7 3/9] clocksource/drivers/arm_arch_timer: Improve printk relevant code
  • From: fu.wei@xxxxxxxxxx
• [PATCH v7 1/9] clocksource/drivers/arm_arch_timer: Move enums and defines to header file
  • From: fu.wei@xxxxxxxxxx
• [PATCH v7 2/9] clocksource/drivers/arm_arch_timer: Add a new enum for spi type
  • From: fu.wei@xxxxxxxxxx
• [PATCH v7 0/9] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer
  • From: fu.wei@xxxxxxxxxx
• Re: [PATCH v3 3/3] ARM64: dts: amlogic: meson-gxbb: Add watchdog node
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM64: dts: amlogic: meson-gxbb: Add watchdog node
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 3/3] ARM64: dts: amlogic: meson-gxbb: Add watchdog node
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: I/O address 0x0cd6 already in use
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: I/O address 0x0cd6 already in use
  • From: Ioan Moldovan <ioan.moldovan1999@xxxxxxxxx>
• [RESEND PATCH 0/2] watchdog: ziirave_wdt: Support firmware update
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH 2/2] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [RESEND PATCH 1/2] watchdog: ziirave_wdt: Correct I2C device id to fix module autoloading.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: I/O address 0x0cd6 already in use
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: I/O address 0x0cd6 already in use
  • From: Ioan Moldovan <ioan.moldovan1999@xxxxxxxxx>
• Re: I/O address 0x0cd6 already in use
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: I/O address 0x0cd6 already in use
  • From: Ioan Moldovan <ioan.moldovan1999@xxxxxxxxx>
• Re: I/O address 0x0cd6 already in use
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: I/O address 0x0cd6 already in use
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• I/O address 0x0cd6 already in use
  • From: Ioan Moldovan <ioan.moldovan1999@xxxxxxxxx>
• Re: [PATCH v2] watchdog: da9063_wdt: don't trigger watchdog too fast
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 0/6] Implement I2C restart handler
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/6] Implement I2C restart handler
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• Re: [RFC 1/6] watchdog: da9063_wdt: don't trigger watchdog too fast
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH v2] watchdog: da9063_wdt: don't trigger watchdog too fast
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• Re: [PATCH 0/6] Implement I2C restart handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 6/6] watchdog: da9063_wdt: add schedule-free and race-free restart handler
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 1/6] watchdog: da9063_wdt: don't trigger watchdog too fast
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 0/6] Implement I2C restart handler
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 1/6] watchdog: da9063_wdt: don't trigger watchdog too fast
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [RFC 3/6] i2c-imx: add blocking xfer function
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [PATCH 0/6] Implement I2C restart handler
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [RFC 5/6] mfd: da9063: save i2c_client for later use
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [RFC 4/6] i2c-core: add possibility to block an adapter for a single user
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [RFC 6/6] watchdog: da9063_wdt: add schedule-free and race-free restart handler
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• [RFC 2/6] watchdog: da9063_wdt: use delayed work to trigger
  • From: Stefan Christ <s.christ@xxxxxxxxx>
• Re: [PATCH v3 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] watchdog: qcom: update device tree bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] watchdog: qcom: update device tree bindings
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] watchdog: qcom: configure BARK time in addition to BITE time
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
  • From: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: renesas-wdt: Add support for the r8a7796 wdt
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 1/3] watchdog: qcom: update device tree bindings
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] watchdog: qcom: configure BARK time in addition to BITE time
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: qcom: update device tree bindings
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: qcom: update device tree bindings
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/3] watchdog: qcom: update device tree bindings
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] qcom watchdog fixes
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] qcom watchdog fixes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: qcom: configure BARK time in addition to BITE time
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: qcom: update device tree bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 0/3] arm64: dts: r8a7796: Add watchdog support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 3/3] watchdog: qcom: configure BARK time in addition to BITE time
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• [PATCH 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• [PATCH 1/3] watchdog: qcom: update device tree bindings
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• [PATCH 0/3] qcom watchdog fixes
  • From: Thomas Pedersen <twp@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: add pretimeout support to the core
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: r8a7796/salvator-x: Enable watchdog timer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: r8a7796: Add RWDT node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: renesas-wdt: Add support for the r8a7796 wdt
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: r8a7796: Add RWDT node
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/3] arm64: dts: r8a7796: Add watchdog support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 3/3] arm64: dts: r8a7796/salvator-x: Enable watchdog timer
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/3] watchdog: renesas-wdt: Add support for the r8a7796 wdt
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: add pretimeout support to the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: add pretimeout support to the core
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: add pretimeout support to the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] fs: compat_ioctl: add pretimeout functions for watchdogs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: add pretimeout support to the core
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 2/2] fs: compat_ioctl: add pretimeout functions for watchdogs
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH v2 1/2] watchdog: add pretimeout support to the core
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH v2 0/2] watchdog: add get/set peretimeout UAPI and internals
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: add pretimeout support to the core
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] fs: compat_ioctl: add pretimeout functions for watchdogs
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH 1/2] watchdog: add pretimeout support to the core
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH 0/2] watchdog: add get/set peretimeout UAPI and internals
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 0/6] watchdog: add watchdog pretimeout framework
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 0/6] watchdog: add watchdog pretimeout framework
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 0/6] watchdog: add watchdog pretimeout framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Meson gxbb watchdog driver.
  • From: Anand Moon <linux.amoon@xxxxxxxxx>
• Re: [v2,1/2] doc/devicetree: Add Aspeed watchdog timer bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] Documentation/watchdog: add support for magic close to watchdog-test
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] Documentation/watchdog: use stdout instead of stderr in watchdog-test
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] watchdog: iTCO-wdt handle 5th variation for Apollo Lake
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Correct iTCO Watchdog for Apollo Lake
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Correct iTCO Watchdog for Apollo Lake
  • From: Darren Hart <dvhart@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Correct iTCO Watchdog for Apollo Lake
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Correct iTCO Watchdog for Apollo Lake
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• [PATCH 1/2] Documentation/watchdog: use stdout instead of stderr in watchdog-test
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• [PATCH 2/2] Documentation/watchdog: add support for magic close to watchdog-test
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: pic32-dmt: Fix return value check in pic32_dmt_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: pic32-dmt: Fix return value check in pic32_dmt_probe()
  • From: weiyj_lk@xxxxxxx
• [PATCH] watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()
  • From: weiyj_lk@xxxxxxx
• Re: [PATCH 1/2] watchdog: ziirave_wdt: Correct I2C device id to fix module autoloading.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• [PATCH 2/2] watchdog: ziirave_wdt: Add support to upload the firmware.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 1/2] watchdog: ziirave_wdt: Correct I2C device id to fix module autoloading.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 0/2] watchdog: ziirave_wdt: Support firmware update
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: ALi M6117 watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• ALi M6117 watchdog driver
  • From: Craig McQueen <craig.mcqueen@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] Correct iTCO Watchdog for Apollo Lake
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• [PATCH v2 1/2] watchdog: iTCO-wdt handle 5th variation for Apollo Lake
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• [PATCH v2 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• [PATCH v2 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• [PATCH v2 1/2] watchdog: iTCO-wdt handle 5th variation for Apollo Lake
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• [PATCH v2 0/2] Correct iTCO Watchdog for Apollo Lake
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• Re: kbuild: default n removals?
  • From: Michal Marek <mmarek@xxxxxxxx>
• Re: [PATCH 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• Re: [PATCH] watchdog: drop redundant 'default n' option for WATCHDOG_SYSFS
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 0/6] watchdog: add watchdog pretimeout framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] watchdog: pretimeout: add panic pretimeout governor
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] watchdog: add set_pretimeout interface
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH V4] watchdog: max77620: Add support for watchdog timer
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH V3] watchdog: max77620: Add support for watchdog timer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: kbuild: default n removals? (was: Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• kbuild: default n removals? (was: Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework)
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3 0/6] watchdog: add watchdog pretimeout framework
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH] watchdog: drop redundant 'default n' option for WATCHDOG_SYSFS
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 6/6] watchdog: pretimeout: add noop pretimeout governor
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 5/6] watchdog: pretimeout: add panic pretimeout governor
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH V3] watchdog: max77620: Add support for watchdog timer
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH V2] watchdog: f71808e_wdt: Add F81866 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH V2] watchdog: max77620: Add support for watchdog timer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: max77620: Add support for watchdog timer
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH] watchdog: max77620: Add support for watchdog timer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/6] watchdog: add set_pretimeout interface
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH V2] watchdog: max77620: Add support for watchdog timer
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH] watchdog: max77620: Add support for watchdog timer
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH v3 0/6] watchdog: add watchdog pretimeout framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] watchdog: pretimeout: add noop pretimeout governor
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] watchdog: pretimeout: add panic pretimeout governor
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH V2] watchdog: f71808e_wdt: Add F81866 support
  • From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
• Re: [PATCH v3 3/6] watchdog: add pretimeout read-only device attribute to sysfs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] watchdog: add set_pretimeout interface
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: f71808e_wdt: Add F81866 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: f71808e_wdt: Add F81866 support
  • From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
• Re: [PATCH 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: Darren Hart <dvhart@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] watchdog: add watchdog pretimeout framework
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/6] watchdog: add set_pretimeout interface
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: max77620: Add support for watchdog timer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 3/6] watchdog: add pretimeout read-only device attribute to sysfs
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH v3 2/6] watchdog: add WDIOC_SETPRETIMEOUT and WDIOC_GETPRETIMEOUT
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH v3 0/6] watchdog: add watchdog pretimeout framework
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH v3 4/6] watchdog: add watchdog pretimeout framework
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH v3 5/6] watchdog: pretimeout: add panic pretimeout governor
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH v3 1/6] watchdog: add set_pretimeout interface
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH v3 6/6] watchdog: pretimeout: add noop pretimeout governor
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: f71808e_wdt: Add F81866 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: sirf: fix __iomem * warnings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: sirf: fix __iomem * warnings
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH] watchdog: max77620: Add support for watchdog timer
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH] watchdog: f71808e_wdt: Add F81866 support
  • From: "Ji-Ze Hong (Peter Hong)" <hpeter@xxxxxxxxx>
• Re: [PATCH 1/7] watchdog: add watchdog pretimeout framework
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/7] watchdog: add watchdog pretimeout framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 3/3] ARM64: dts: amlogic: meson-gxbb: Add watchdog node
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• Re: [PATCH 2/3] sbsa_gwdt: Use max_hw_heartbeat_ms instead of max_timeout
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] sbsa_gwdt: Set WDOG_HW_RUNNING, when watchdog is already running.
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: skip min and max timeout validity check when max_hw_heartbeat_ms is defined
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: pcwd: Utilize the module_isa_driver macro
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: pcwd: Utilize the module_isa_driver macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] watchdog: skip min and max timeout validity check when max_hw_heartbeat_ms is defined
  • From: fu.wei@xxxxxxxxxx
• [PATCH 2/3] sbsa_gwdt: Use max_hw_heartbeat_ms instead of max_timeout
  • From: fu.wei@xxxxxxxxxx
• [PATCH 3/3] sbsa_gwdt: Set WDOG_HW_RUNNING, when watchdog is already running.
  • From: fu.wei@xxxxxxxxxx
• [PATCH 0/3] watchdog, sbsa_gwdt: Update SBSA watchdog with the new infrastructure of watchdog.
  • From: fu.wei@xxxxxxxxxx
• Re: [PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v7 00/10] kthread: Kthread worker API improvements
  • From: Petr Mladek <pmladek@xxxxxxxx>
• Re: [PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Carlo Caione <carlo@xxxxxxxxxx>
• Re: [PATCH 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
  • From: Carlo Caione <carlo@xxxxxxxxxx>
• [PATCH 3/3] ARM64: dts: amlogic: meson-gxbb: Add watchdog node
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] watchdog: Add Aspeed watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] doc/devicetree: Add Aspeed watchdog timer bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 1/4] isa: Allow ISA-style drivers on modern systems
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/4] iio: stx104: Allow build for X86_64
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: Add a device managed API for watchdog_register_device()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v5 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v5 3/4] iio: stx104: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v5 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v5 1/4] isa: Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v5 0/4] Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v4 3/4] iio: stx104: Allow build for X86_64
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: stx104: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v4 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: stx104: Allow build for X86_64
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 2/4] gpio: Allow PC/104 devices on X86_64
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/4] isa: Allow ISA-style drivers on modern systems
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: Add a device managed API for watchdog_register_device()
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 13/20] hung_task: Convert hungtaskd into kthread worker API
  • From: Petr Mladek <pmladek@xxxxxxxx>
• Re: [RFC PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 1/7] watchdog: add watchdog pretimeout framework
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/7] watchdog: add watchdog pretimeout framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/7] watchdog: add watchdog pretimeout framework
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: Add a device managed API for watchdog_register_device()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  • From: Carlo Caione <carlo@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Carlo Caione <carlo@xxxxxxxxxx>
• [PATCH] watchdog: Add a device managed API for watchdog_register_device()
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [RFC PATCH 1/3] watchdog: Add Meson GXBB Watchdog Driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [RFC PATCH 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [RFC PATCH 3/3] ARM64: dts: amlogic: meson-gxbb: Add watchdog node
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [RFC PATCH 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v6 13/20] hung_task: Convert hungtaskd into kthread worker API
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/20] kthread: Use kthread worker API more widely
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH 4/7] watchdog: softdog: remove forward declaration
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/7] watchdog: softdog: consistently use softdog_ prefix
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 5/7] watchdog: softdog: sort includes to avoid duplicates
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 7/7] watchdog: softdog: improve coding style
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 6/7] watchdog: softdog: drop superfluous set_timeout callback
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/7] watchdog: softdog: use watchdog core to init timeout value
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/7] watchdog: softdog: remove obsolete comments
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: hpwdt: remove email address from doc
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] MAINTAINERS: add entry for HPE watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [GIT PULL REQUEST] watchdog - v4.7 Merge Window
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• [PATCH v2 1/2] MAINTAINERS: add entry for HPE watchdog driver
  • From: Brian Boylston <brian.boylston@xxxxxxx>
• [PATCH v2 0/2] watchdog: hpwdt: update HPE maintainer
  • From: Brian Boylston <brian.boylston@xxxxxxx>
• [PATCH v2 2/2] watchdog: hpwdt: remove email address from doc
  • From: Brian Boylston <brian.boylston@xxxxxxx>
• [RFC 2/2] watchdog: pretimeout: add userspace notifier pretimeout governor
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 0/2] watchdog: pretimeout: userspace governor
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC 1/2] watchdog: dev: add helper for creating uevent on dev
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 5/7] watchdog: add pretimeout support to the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 6/7] fs: compat_ioctl: add pretimeout functions for watchdogs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/7] watchdog: pretimeout: add noop pretimeout governor
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/7] watchdog: add watchdog pretimeout framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 7/7] watchdog: softdog: implement pretimeout support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 4/7] watchdog: documentation: squash paragraphs about 'no set_timeout'
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/7] watchdog: pretimeout: add panic pretimeout governor
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/7] watchdog: add pretimeout support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• [PATCH 7/7] watchdog: softdog: improve coding style
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 6/7] watchdog: softdog: drop superfluous set_timeout callback
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 5/7] watchdog: softdog: sort includes to avoid duplicates
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 4/7] watchdog: softdog: remove forward declaration
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/7] watchdog: softdog: use watchdog core to init timeout value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/7] watchdog: softdog: consistently use softdog_ prefix
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/7] watchdog: softdog: cleanups
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/7] watchdog: softdog: remove obsolete comments
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: Darren Hart <dvhart@xxxxxxxxxxxxx>
• [PATCH v4 1/4] isa: Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v4 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v4 3/4] iio: stx104: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v4 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v4 0/4] Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v3 1/4] isa: Allow ISA-style drivers on modern systems
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 0/4] Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 3/4] iio: stx104: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 1/4] isa: Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 1/4] isa: Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 1/4] isa: Allow ISA-style drivers on modern systems
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 1/4] isa: Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 3/4] iio: stx104: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• RE: [PATCH] watchdog: hpwdt: update HPE maintainer
  • From: "Boylston, Brian" <brian.boylston@xxxxxxx>
• Re: [PATCH] watchdog: hpwdt: update HPE maintainer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/4] isa: Allow ISA-style drivers on modern systems
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] isa: Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/4] isa: Allow ISA-style drivers on modern systems
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 0/4] Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 1/4] isa: Allow ISA-style drivers on modern systems
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 3/4] iio: stx104: Allow build for X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 2/4] gpio: Allow PC/104 devices on X86_64
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] watchdog: hpwdt: update HPE maintainer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: hpwdt: update HPE maintainer
  • From: Brian Boylston <brian.boylston@xxxxxxx>
• Re: [PATCH 52/54] MAINTAINERS: Add file patterns for watchdog device tree bindings
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 52/54] MAINTAINERS: Add file patterns for watchdog device tree bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 52/54] MAINTAINERS: Add file patterns for watchdog device tree bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: salvator-x: Enable watchdog timer
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: r8a7795: Add RWDT node
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: iTCO-wdt handle 5th variation for Apollo Lake
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: salvator-x: Enable watchdog timer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: r8a7795: Add RWDT node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3 2/2] watchdog: Add Aspeed watchdog driver
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH v3 1/2] doc/devicetree: Add Aspeed watchdog timer bindings
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH v3 0/2] watchdog: Add Aspeed watchdog driver
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: Add Aspeed watchdog driver
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• Re: [PATCH 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] x86: Fix Apollo Lake Watchdog address in PMC driver
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• [PATCH 1/2] watchdog: iTCO-wdt handle 5th variation for Apollo Lake
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• [PATCH 0/2] Correct iTCO Watchdog for Apollo Lake
  • From: "Yong, Jonathan" <jonathan.yong@xxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Report reboot reason
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] watchdog: Add Aspeed watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 2/2] watchdog: shwdt: Use setup_timer()
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH 1/2] watchdog: cpwd: Use setup_timer()
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: remove error message when unable to allocate watchdog device
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v2] watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: f71808e_wdt: Fix typo
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v3] watchdog: f71808e_wdt: Add F81865 support
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: core: Fix circular locking dependency
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: core: Fix circular locking dependency
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: core: Fix circular locking dependency
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/5] watchdog: octeon: Handle the FROZEN hot plug notifier actions.
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH V4] watchdog: hpwdt: Adjust documentation to match latest kernel module parameters
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v5 1/2] watchdog: imx2_wdt: add external reset support via dt prop
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Report reboot reason
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v2 0/4] watchdog: add driver for Renesas Gen3 WDT watchdogs
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] sp5100_tco: properly check for new register layouts
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: core: fix trivial typo in a comment
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] watchdog: core: Fix circular locking dependency
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH] sp5100_tco: properly check for new register layouts
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH v2 2/2] watchdog: Add Aspeed watchdog driver
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH v2 1/2] doc/devicetree: Add Aspeed watchdog timer bindings
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH v2 0/2] watchdog: Add Aspeed watchdog driver
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 06/10] watchdog: ebc-c384_wdt: Utilize the ISA bus driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 06/10] watchdog: ebc-c384_wdt: Utilize the ISA bus driver
  • From: Sasha Levin <sasha.levin@xxxxxxxxxx>
• Re: [PATCH] Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: ebc-c384_wdt: Simplify ebc_c384_wdt_start timeout computation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] watchdog: ebc-c384_wdt: Simplify ebc_c384_wdt_start timeout computation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: ebc-c384_wdt: Simplify ebc_c384_wdt_start timeout computation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v6 00/20] kthread: Use kthread worker API more widely
  • From: Petr Mladek <pmladek@xxxxxxxx>
• Re: [PATCH 2/2] watchdog: shwdt: Use setup_timer()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] watchdog: cpwd: Use setup_timer()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add Aspeed watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] doc/devicetree: Add Aspeed watchdog timer bindings
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add Aspeed watchdog driver
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 1/2] doc/devicetree: Add Aspeed watchdog timer bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] watchdog: Add Aspeed watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: core: Fix circular locking dependency
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: core: Fix circular locking dependency
  • From: Clemens Gruber <clemens.gruber@xxxxxxxxxxxx>
• Re: [PATCH (v5) 3/11] MIPS: bmips: Add bcm6345-l2-timer interrupt controller
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] watchdog: Add Aspeed watchdog driver
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH 1/2] doc/devicetree: Add Aspeed watchdog timer bindings
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH 0/2] watchdog: Add Aspeed watchdog driver
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH 2/2] watchdog: shwdt: Use setup_timer()
  • From: Muhammad Falak R Wani <falakreyaz@xxxxxxxxx>
• [PATCH 1/2] watchdog: cpwd: Use setup_timer()
  • From: Muhammad Falak R Wani <falakreyaz@xxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Pratyush Anand <panand@xxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Pratyush Anand <panand@xxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Pratyush Anand <panand@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] sp5100_tco: properly check for new register layouts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Report reboot reason
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Report reboot reason
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: Report reboot reason
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• [PATCH] sp5100_tco: properly check for new register layouts
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Pratyush Anand <panand@xxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Pratyush Anand <panand@xxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Pratyush Anand <panand@xxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Pratyush Anand <panand@xxxxxxxxxx>
• Re: [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Timur Tabi <timur@xxxxxxxxxxxxxx>
• [PATCH RFC] Watchdog: sbsa_gwdt: Enhance timeout range
  • From: Pratyush Anand <panand@xxxxxxxxxx>
• [PATCH v2 10/10] gpio: ws16c48: Utilize the ISA bus driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 09/10] gpio: 104-idio-16: Utilize the ISA bus driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 08/10] gpio: 104-idi-48: Utilize the ISA bus driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 07/10] gpio: 104-dio-48e: Utilize the ISA bus driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 06/10] watchdog: ebc-c384_wdt: Utilize the ISA bus driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 05/10] iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 04/10] iio: stx104: Add X86 dependency to STX104 Kconfig option
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 03/10] Documentation: Add ISA bus driver documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 02/10] isa: Implement the max_num_isa_dev macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 01/10] isa: Implement the module_isa_driver macro
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 00/10] Use the ISA bus driver for PC/104 and ISA devices
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 03/10] Documentation: Add ISA bus driver documentation
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/10] Use the ISA bus driver for PC/104 and ISA devices
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: dw_wdt: dont build for avr32
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH] watchdog: dw_wdt: dont build for avr32
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: dw_wdt: dont build for avr32
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH] watchdog: dw_wdt: dont build for avr32
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: dw_wdt: dont build for avr32
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: dw_wdt: dont build for avr32
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: dw_wdt: dont build for avr32
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH] watchdog: remove error message when unable to allocate watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: trivial fix of spelling mistake on "allocate"
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• [PATCH] watchdog: remove error message when unable to allocate watchdog device
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: trivial fix of spelling mistake on "allocate"
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
  • From: Knud Poulsen <knpo@xxxxxxxx>
• Re: [PATCH] watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
  • From: Knud Poulsen <knpo@xxxxxxxx>
• Re: [PATCH] watchdog: trivial fix of spelling mistake on "allocate"
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] watchdog: trivial fix of spelling mistake on "allocate"
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: f71808e_wdt: Fix typo
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: trivial fix of spelling mistake on "allocate"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] watchdog: f71808e_wdt: Fix typo
  • From: Knud Poulsen <knpo@xxxxxxxx>
• [PATCH] watchdog: f71808e_wdt: Fix WDTMOUT_STS register read
  • From: Knud Poulsen <knpo@xxxxxxxx>
• Re: [PATCH v3] watchdog: f71808e_wdt: Add F81865 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3] watchdog: f71808e_wdt: Add F81865 support
  • From: Knud Poulsen <knpo@xxxxxxxx>
• Re: [PATCH v6 00/20] kthread: Use kthread worker API more widely
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH v2] watchdog: f71808e_wdt: Add F81865 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: f71808e_wdt: Add F81865 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: f71808e_wdt: Add F81865 support
  • From: Knud Poulsen <knpo@xxxxxxxx>
• Re: [PATCH v2] watchdog: f71808e_wdt: Add F81865 support
  • From: Knud Poulsen <knpo@xxxxxxxx>
• Re: [PATCH v2] watchdog: f71808e_wdt: Add F81865 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: f71808e_wdt: Add F81865 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2] watchdog: f71808e_wdt: Add F81865 support
  • From: Knud Poulsen <knpo@xxxxxxxx>
• Re: [PATCH] watchdog: core: Fix circular locking dependency
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdoug group ping
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: f71808e_wdt: Add F81865 support
  • From: Knud Poulsen <knpo@xxxxxxxx>
• Re: watchdoug group ping
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: core: Fix circular locking dependency
  • From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: core: Fix circular locking dependency
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] watchdog: f71808e_wdt: Add F81865 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: watchdog: deadlock warning with imx2_wdt driver and systemd
  • From: Clemens Gruber <clemens.gruber@xxxxxxxxxxxx>
• Re: watchdog: deadlock warning with imx2_wdt driver and systemd
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] watchdog: f71808e_wdt: Add F81865 support
  • From: Knud Poulsen <knpo@xxxxxxxx>
• Re: [PATCH v2] watchdog: add driver for StreamLabs USB watchdog device
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v2] watchdog: add driver for StreamLabs USB watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] watchdog: add driver for StreamLabs USB watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 1/2] watchdog: imx2_wdt: add external reset support via dt prop
  • From: Akshay Bhat <akshay.bhat@xxxxxxxxxxx>
• Re: [PATCH v2] watchdog: add driver for StreamLabs USB watchdog device
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v2] watchdog: add driver for StreamLabs USB watchdog device
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>