On 30/05/16 15:29, Neil Armstrong wrote: > Adds support for the Amlogic Meson GXBB SoC Watchdog Timer. > It differs from the meson6/meson8b HW, so need for a separate driver. > The HW provides a divider capable of having a 1ms timebase thus simplifying > the counter update. > The restart call is not provided even if the HW is capable of triggering a > system reset immediately because of the PSCI firmare having such functionnality. > The watchdog is not expected to be running at boot time since there is a separate > system-level watchdog running from the SCPI co-processor, but this case would be > handle in a next driver update. > > Changes since RFC version at http://lkml.kernel.org/r/1464249112-13658-1-git-send-email-narmstrong@xxxxxxxxxxxx : > - Remove status callback, will re-introduce it later to managed the already-running use case > - Fix registers defines indentation > - Fix space between operators > - Make all callbacks static functions > - Fix bindings with missing clocks attribute > - Do not stop/start watchdog on a timeout setup > - Fix probe device configuration > > Neil Armstrong (3): > watchdog: Add Meson GXBB Watchdog Driver > dt-bindings: watchdog: Add Meson GXBB Watchdog bindings > ARM64: dts: amlogic: meson-gxbb: Add watchdog node I'm missing [PATCH 2/3] -- Carlo Caione -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
