Hi,
On 06/08/2016 03:17 AM, Laxman Dewangan wrote:
Maxim PMIC MAX77620 is Power management IC which have multiple
sub blocks like regulators (DCDC/LDOs), GPIO, RTC, Clock, Watchdog
timer etc.
Add the driver for watchdog timer under watchdog framework.
The driver implements the watchdog callbacks to start, stop,
ping and set timeout for watchodg framework.
Almost good. One more comment below.
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
Changes from V1:
- Remove the error prints from start/stop/ping to simplify the function.
- Instead of stopping running WDT, inform HW RUNNING and update the required
param accordingly.
- Resequence the param sets for wdt device to avoid race condition, move all
wdt device setting before registration.
[ ... ]
+static int max77620_wdt_probe(struct platform_device *pdev)
+{
+ struct max77620_wdt *wdt;
+ struct watchdog_device *wdt_dev;
+ unsigned int regval;
+ int ret;
+
+ wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ wdt->dev = &pdev->dev;
+ wdt->rmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!wdt->rmap) {
+ dev_err(wdt->dev, "Failed to get parent regmap\n");
+ return -ENODEV;
+ }
+
+ wdt_dev = &wdt->wdt_dev;
+ wdt_dev->info = &max77620_wdt_info;
+ wdt_dev->ops = &max77620_wdt_ops;
+ wdt_dev->min_timeout = 2;
+ wdt_dev->max_timeout = 128;
+ wdt_dev->max_hw_heartbeat_ms = 128 * 1000;
+
+ platform_set_drvdata(pdev, wdt);
+
+ /* Enable WD_RST_WK - WDT expire results in a restart */
+ ret = regmap_update_bits(wdt->rmap, MAX77620_REG_ONOFFCNFG2,
+ MAX77620_ONOFFCNFG2_WD_RST_WK,
+ MAX77620_ONOFFCNFG2_WD_RST_WK);
+ if (ret < 0) {
+ dev_err(wdt->dev, "Failed to set WD_RST_WK: %d\n", ret);
+ return ret;
+ }
+
+ /* Set WDT clear in OFF and sleep mode */
+ ret = regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2,
+ MAX77620_WDTOFFC | MAX77620_WDTSLPC,
+ MAX77620_WDTOFFC | MAX77620_WDTSLPC);
+ if (ret < 0) {
+ dev_err(wdt->dev, "Failed to set WDT OFF mode: %d\n", ret);
+ return ret;
+ }
+
+ /* Check if WDT running and ig yes then set flags properly */
+ ret = regmap_read(wdt->rmap, MAX77620_REG_CNFGGLBL2, ®val);
+ if (ret < 0) {
+ dev_err(wdt->dev, "Failed to read WDT CFG register: %d\n", ret);
+ return ret;
+ }
+
+ if (regval & MAX77620_WDTEN) {
+ regval = regval & MAX77620_TWD_MASK;
+ if (regval == MAX77620_TWD_2s)
+ wdt_dev->timeout = 2;
+ else if (regval == MAX77620_TWD_16s)
+ wdt_dev->timeout = 16;
+ else if (regval == MAX77620_TWD_64s)
+ wdt_dev->timeout = 64;
+ else
+ wdt_dev->timeout = 128;
+ set_bit(WDOG_HW_RUNNING, &wdt_dev->status);
+ }
Please also set a default timeout if the watchdog is not running
(and remember to write it to the chip). Otherwise the core won't know
the timeout and can not report it to user space when the watchdog
device is opened.
Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
