On 26/05/16 09:51, Neil Armstrong wrote:
> Add watchdog specific driver for Amlogic Meson GXBB SoC.
>
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> +
[...]
> +#define DEFAULT_TIMEOUT 10 /* seconds */
> +
> +#define GXBB_WDT_CTRL_REG 0x0
> +#define GXBB_WDT_CTRL1_REG 0x4
> +#define GXBB_WDT_TCNT_REG 0x8
> +#define GXBB_WDT_RSET_REG 0xc
> +
> +#define GXBB_WDT_CTRL_EE_RESET_NOW BIT(26)
> +
> +#define GXBB_WDT_CTRL_CLKDIV_EN BIT(25)
> +#define GXBB_WDT_CTRL_CLK_EN BIT(24)
> +#define GXBB_WDT_CTRL_IRQ_EN BIT(23)
> +#define GXBB_WDT_CTRL_EE_RESET BIT(21)
> +#define GXBB_WDT_CTRL_XTAL_SEL (0)
> +#define GXBB_WDT_CTRL_CLK81_SEL BIT(19)
> +#define GXBB_WDT_CTRL_EN BIT(18)
> +#define GXBB_WDT_CTRL_DIV_MASK (BIT(18)-1)
> +
> +#define GXBB_WDT_CTRL1_GPIO_PULSE BIT(17)
> +#define GXBB_WDT_CTRL1_GPIO_POL_RESET_0 BIT(16)
> +#define GXBB_WDT_CTRL1_GPIO_POL_RESET_1 (0)
> +#define GXBB_WDT_CTRL1_GPIO_PULSE_CNT (BIT(16)-1)
> +
> +#define GXBB_WDT_TCNT_SETUP_MASK (BIT(16)-1)
> +#define GXBB_WDT_TCNT_CNT_SHIFT 16
Indentation
[...]
> +int meson_gxbb_wdt_set_timeout(struct watchdog_device *wdt_dev,
> + unsigned int timeout)
> +{
> + struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
> +
> + if (watchdog_active(wdt_dev))
> + meson_gxbb_wdt_stop(wdt_dev);
> +
> + meson_gxbb_wdt_ping(wdt_dev);
> +
> + writel(timeout*1000, data->reg_base + GXBB_WDT_TCNT_REG);
nit: spaces around "*"
[...]
> + data->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(data->clk))
> + return PTR_ERR(data->clk);
> +
> + clk_prepare_enable(data->clk);
Do we need to merge the clock controller driver before this?
Cheers,
--
Carlo Caione
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
