On 04/22/2016 07:47 AM, Knud Poulsen wrote:
On 2016-04-22 16:19, Knud Poulsen wrote:
On 2016-04-22 15:59, Guenter Roeck wrote:
On 04/22/2016 06:51 AM, Guenter Roeck wrote:
On 04/22/2016 04:48 AM, Knud Poulsen wrote:
Adds watchdog support for Fintek F81865 Super-IO chip to
Fintek wdt driver (f71808e_wdt)
Tested and verified on Lanner LEC-3030 Industrial PC
Datasheet references:
http://www.hardwaresecrets.com/datasheets/F81865_V028P.pdf
http://www.alldatasheet.com/datasheet-pdf/pdf/406317/FINTEK/F81865.html
Signed-off-by: Knud Poulsen <knpo@xxxxxxxx>
---
drivers/watchdog/f71808e_wdt.c | 31 +++++++++++++++++++++++++++----
1 file changed, 27 insertions(+), 4 deletions(-)
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
index 016bd93..4133cd3 100644
--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -59,6 +59,7 @@
#define SIO_F71869A_ID 0x1007 /* Chipset ID */
#define SIO_F71882_ID 0x0541 /* Chipset ID */
#define SIO_F71889_ID 0x0723 /* Chipset ID */
+#define SIO_F81865_ID 0x0704 /* Chipset ID */
#define F71808FG_REG_WDO_CONF 0xf0
#define F71808FG_REG_WDT_CONF 0xf5
@@ -71,6 +72,10 @@
#define F71808FG_FLAG_WD_PULSE 4
#define F71808FG_FLAG_WD_UNIT 3
+#define F81865_REG_WDO_CONF 0xfa
+#define F81865_FLAG_WDOUT_EN 0
+#define F81865_FLAG_WDTMOUT_STS 6
+
[ ... ]
wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF);
- watchdog.caused_reboot = wdt_conf & F71808FG_FLAG_WDTMOUT_STS;
+
+ if (watchdog.type == f81865)
+ watchdog.caused_reboot = wdt_conf & F81865_FLAG_WDTMOUT_STS;
+ else
+ watchdog.caused_reboot = wdt_conf & F71808FG_FLAG_WDTMOUT_STS;
Are you sure this one is correct ? The bit configuration is exactly the same
as with other chips supported by this driver. Actually, I don't see an indication
in any of the datasheets I have which would suggest that reading bit 5 means
that the last reboot occurred due to a watchdog timeout. As far as I can see,
it just means that the watchdog is enabled.
Am I missing something here ?
After another look, I am even more confused. F81865_FLAG_WDTMOUT_STS and
F71808FG_FLAG_WDTMOUT_STS are bit maps, not bits.
5 = 0b0101, 6 = 0b0110. Bit 0/1 select the pulse width, bit 2 selects
the output polarity of RSTOUT. What does this have to do with the reboot cause ?
You're right, great catch!!, I didn't grok the bit-map, not bit-index part here
and got thrown by the 6 vs 5 in the datasheet vs the existing code, *Doh*
ps3 en route.
Hi Guenter,
The coin drops... ok, I now share your confusion 110%... let me trace and test
this *a lot* more on Monday when I have access to the hardware...
ps3 by ~mid next week...
No problem. Yes, testing this will be important.
Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
