Linux Tegra Development
[Prev Page][Next Page]
- Re: [PATCH v1] gpu: host1x: Ignore clients initialization failure
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 20/40] mmc: tegra: Add a workaround for tap value change glitch
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 13/40] mmc: tegra: Poll for calibration completion
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 16/40] mmc: tegra: Disable card clock during pad calibration
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v1] gpu: host1x: Ignore clients initialization failure
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 12/40] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 15/40] mmc: tegra: Power on the calibration pad
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 5/8] arm64: dts: tegra186: Add SDMMC4 DQS trim value
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 13/40] mmc: tegra: Poll for calibration completion
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 10/40] soc/tegra: pmc: Implement pad configuration via pinctrl
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 12/40] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 5/8] arm64: dts: tegra186: Add SDMMC4 DQS trim value
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 4/8] mmc: tegra: Implement HS400 delay line calibration
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 10/40] soc/tegra: pmc: Implement pad configuration via pinctrl
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 5/8] arm64: dts: tegra186: Add SDMMC4 DQS trim value
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 3/8] mmc: tegra: Implement HS400 enhanced strobe
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 07/40] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 05/40] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 03/40] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 02/40] dt-bindings: mmc: tegra: Add pad voltage control properties
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 01/40] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 5/8] arm64: dts: tegra186: Add SDMMC4 DQS trim value
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 5/8] arm64: dts: tegra186: Add SDMMC4 DQS trim value
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 4/8] mmc: tegra: Implement HS400 delay line calibration
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 1/8] dt-bindings: mmc: Add DQS trim value to Tegra SDHCI
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 3/8] mmc: tegra: Implement HS400 enhanced strobe
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 2/8] mmc: tegra: Parse and program DQS trim value
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 2/8] mmc: tegra: Parse and program DQS trim value
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v2 2/8] iommu/tegra: gart: Provide access to Memory Controller driver
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 1/8] dt-bindings: mmc: Add DQS trim value to Tegra SDHCI
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v2 2/8] iommu/tegra: gart: Provide access to Memory Controller driver
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v2 1/8] memory: tegra: Provide facility for integration with the GART driver
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v1] gpu: host1x: Ignore clients initialization failure
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
- From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
- Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
- From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
- Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [RFC PATCH v4 1/2] drm: Add generic colorkey properties for display planes
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
- From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
- Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH v2 0/8] Tegra GART driver clean up and optimization
- From: Joerg Roedel <joro@xxxxxxxxxx>
- Re: [RFC PATCH v4 1/2] drm: Add generic colorkey properties for display planes
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- [RFC PATCH v4 1/2] drm: Add generic colorkey properties for display planes
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [RFC PATCH v4 2/2] drm/tegra: plane: Add generic colorkey properties for older Tegra's
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [RFC PATCH v4 0/2] drm: Add generic colorkey plane properties
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH 8/8] arm64: dts: tegra210: Enable HS400
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 7/8] arm64: dts: tegra186: Enable HS400
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 6/8] arm64: dts: tegra210: Add SDMMC4 DQS trim value
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 5/8] arm64: dts: tegra186: Add SDMMC4 DQS trim value
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 3/8] mmc: tegra: Implement HS400 enhanced strobe
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 2/8] mmc: tegra: Parse and program DQS trim value
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 1/8] dt-bindings: mmc: Add DQS trim value to Tegra SDHCI
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 0/8] Tegra SDHCI support HS400 on Tegra210 and Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 4/8] mmc: tegra: Implement HS400 delay line calibration
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 3/3] gpu: host1x: Continue CDMA execution starting with a next job
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 2/3] gpu: host1x: Don't complete a completed job
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 1/3] gpu: host1x: Cancel only job that actually got stuck
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 0/3] host1x_cdma_update_sync_queue() clean up
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v1] gpu: host1x: Cancel only job that actually got stuck
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- [LKP] 28a54ccb4d [ 2.593639] BUG: unable to handle kernel paging request at c1aa2000
- From: kernel test robot <rong.a.chen@xxxxxxxxx>
- Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 2/2] gpio: tegra: Move driver registration to subsys_init level
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH] drm/tegra: Convert drm_atomic_helper_suspend/resume()
- From: Souptick Joarder <jrdr.linux@xxxxxxxxx>
- [PATCH v1] gpu: host1x: Cancel only job that actually got stuck
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [RFC PATCH v1] memory: tegra: Block DMA for clients HW on a faulty memory access
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [RFC PATCH v1] memory: tegra: Block DMA for clients HW on a faulty memory access
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v2 1/8] memory: tegra: Provide facility for integration with the GART driver
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 3/8] iommu/tegra: gart: Clean up drivers module code
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 4/8] iommu/tegra: gart: Remove pr_fmt and clean up includes
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 5/8] iommu/tegra: gart: Clean up driver probe errors handling
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 8/8] iommu/tegra: gart: Optimize mapping / unmapping performance
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 7/8] iommu: Introduce iotlb_sync_map callback
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 6/8] iommu/tegra: gart: Ignore devices without IOMMU phandle in DT
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 2/8] iommu/tegra: gart: Provide access to Memory Controller driver
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2 0/8] Tegra GART driver clean up and optimization
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [RFC PATCH v1] memory: tegra: Block DMA for clients HW on a faulty memory access
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] ASoC: core: Optimise suspend/resume of DAPM widgets
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Robin Murphy <robin.murphy@xxxxxxx>
- [RFC PATCH] ASoC: core: Optimise suspend/resume of DAPM widgets
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH v3 3/8] mailbox: Add transmit done by blocking option
- From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
- Re: [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
- From: Anthony Eden <aeden@xxxxxxxxxxxxx>
- Re: [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
- From: Anthony Eden <aeden@xxxxxxxxxxxxx>
- Re: [PATCH v1] gpu: host1x: Ignore clients initialization failure
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v1] gpu: host1x: Ignore clients initialization failure
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
- From: "David R. Piegdon" <lkml@xxxxxxxx>
- Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
- From: Nicolas Chauvet <kwizart@xxxxxxxxx>
- Re: [PATCH 1/3] soc/tegra: pmc: set IO pad power state and voltage via pinctrl fw
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH 1/3] soc/tegra: pmc: set IO pad power state and voltage via pinctrl fw
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v5 7/8] clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v5 6/8] clk: tegra20: Turn EMC clock gate into divider
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
- From: "David R. Piegdon" <lkml@xxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 1/3] soc/tegra: pmc: set IO pad power state and voltage via pinctrl fw
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH 3/3] drm/tegra: sor: change io pad power state using new pmc api
- From: Venkat Reddy Talla <vreddytalla@xxxxxxxxxx>
- [PATCH 2/3] dt-bindings: tegra: update PMC DT binding with io pads control
- From: Venkat Reddy Talla <vreddytalla@xxxxxxxxxx>
- [PATCH 1/3] soc/tegra: pmc: set IO pad power state and voltage via pinctrl fw
- From: Venkat Reddy Talla <vreddytalla@xxxxxxxxxx>
- Re: [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH v1 2/2] gpio: tegra: Move driver registration to subsys_init level
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v1 1/2] pinctrl: tegra: Move drivers registration to arch_init level
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Ming Lei <ming.lei@xxxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH 2/2] ARM: tegra: readd gpio-ranges properties
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Ming Lei <ming.lei@xxxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH] ARM: dts: paz00: fix wakeup gpio keycode
- From: Marc Dietrich <marvin24@xxxxxx>
- Re: [PATCH 2/2] ARM: tegra: readd gpio-ranges properties
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 2/2] ARM: tegra: readd gpio-ranges properties
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH 2/2] ARM: tegra: readd gpio-ranges properties
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH 01/40] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 02/40] dt-bindings: mmc: tegra: Add pad voltage control properties
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 03/40] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 05/40] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 07/40] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 08/40] soc/tegra: pmc: Use X macro to generate IO pad tables
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 10/40] soc/tegra: pmc: Implement pad configuration via pinctrl
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 11/40] mmc: sdhci: Add a quirk to skip clearing the transfer mode register on tuning
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 12/40] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 13/40] mmc: tegra: Poll for calibration completion
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 14/40] mmc: tegra: Set calibration pad voltage reference
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 15/40] mmc: tegra: Power on the calibration pad
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 16/40] mmc: tegra: Disable card clock during pad calibration
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 17/40] mmc: tegra: Program pad autocal offsets from dt
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 18/40] mmc: tegra: Perform pad calibration after voltage switch
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 19/40] mmc: tegra: Enable pad calibration on Tegra210 and Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 20/40] mmc: tegra: Add a workaround for tap value change glitch
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 21/40] mmc: tegra: Parse default trim and tap from dt
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 22/40] mmc: tegra: Configure default tap values
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 23/40] mmc: tegra: Configure default trim value on reset
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 24/40] mmc: tegra: Use standard SDHCI tuning on Tegra210 and Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 26/40] mmc: tegra: Enable workaround for tuning transfer mode bug
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 25/40] mmc: sdhci: Add a quirk to disable card clock during tuning
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 27/40] mmc: tegra: Set SDHCI_QUIRK2_TUNE_DIS_CARD_CLK on Tegra210
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 29/40] mmc: tegra: Enable UHS and HS200 modes for Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 30/40] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 31/40] arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 32/40] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 33/40] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 35/40] arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 34/40] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 38/40] arm64: dts: tegra186: Add SDHCI tap and trim values
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 37/40] arm64: dts: tegra210: Add SDHCI tap and trim values
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 39/40] arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 40/40] arm64: dts: tegra210: Assign clocks for sdmmc1 and sdmmc4
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 36/40] arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 28/40] mmc: tegra: Enable UHS and HS200 modes for Tegra210
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 09/40] soc/tegra: pmc: Remove public pad voltage APIs
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 06/40] soc/tegra: pmc: Factor out DPD register bit calculation
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 04/40] dt-bindings: mmc: Add Tegra SDHCI sampling trimmer values
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 00/40] Tegra SDHCI add support for HS200 and UHS signaling
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v1] gpu: host1x: Ignore clients initialization failure
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v5 0/6] KASan for arm
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v5 0/6] KASan for arm
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 0/6] KASan for arm
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v5 0/6] KASan for arm
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Re: Tegra20 blank screen with grate driver
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Tegra20 blank screen with grate driver
- From: Kyle Evans <kvans32@xxxxxxxxx>
- Re: [PATCH v5 0/6] KASan for arm
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Ming Lei <ming.lei@xxxxxxxxxx>
- Re: [PATCH 12/15] ARM: tegra: apalis-tk1: add toradex,apalis-tk1-v1.2 compatible
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 28/28] ARM: tegra: apalis_t30: support v1.1 hardware revision
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] drm/tegra: Convert drm_atomic_helper_suspend/resume()
- From: Souptick Joarder <jrdr.linux@xxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Ming Lei <ming.lei@xxxxxxxxxx>
- Re: [PATCH v1] media: staging: tegra-vde: Replace debug messages with trace points
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH v2 03/10] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH v2 03/10] mmc: tegra: Power on the calibration pad
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH v2 00/10] Tegra SDHCI update the pad autocal procedure
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH v2 03/10] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Ming Lei <ming.lei@xxxxxxxxxx>
- Re: [PATCH v2 05/10] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 02/10] dt-bindings: mmc: tegra: Add nvidia,only-1-8-v property
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 01/10] dt-bindings: mmc: tegra: Add pad voltage control properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [Linux-kernel] [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [Linux-kernel] [PATCH 0/4] ASoC: Tegra30 TDM support
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 00/10] Tegra SDHCI update the pad autocal procedure
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH v2 00/10] Tegra SDHCI update the pad autocal procedure
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- [PATCH v6 2/7] soc/tegra: pmc: Factor out DPD register bit calculation
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v6 1/7] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v6 7/7] soc/tegra: pmc: Implement pad configuration via pinctrl
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v6 6/7] soc/tegra: pmc: Remove public pad voltage APIs
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v6 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v6 4/7] soc/tegra: pmc: Use X macro to generate IO pad tables
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v6 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v6 0/7] Tegra PMC pinctrl pad configuration
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Applied "ASoC: tegra: i2s: Fix typo/broken macro" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 4/4] ASoC: tegra: i2s: Add support for more than 2 channels
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 4/4] ASoC: tegra: i2s: Add support for more than 2 channels
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- [PATCH] pci: disable nv_msi_ht_cap_quirk_leaf quirk on non-x86 hw
- From: Nicolas Chauvet <kwizart@xxxxxxxxx>
- Re: [alsa-devel] [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
- From: Ben Dooks <ben@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH 1/4] ASoC: tegra: i2s: Fix typo/broken macro
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] ASoC: tegra_alc5632: fix device_node refcounting
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH] ASoC: tegra_alc5632: fix device_node refcounting
- From: Marc Dietrich <marvin24@xxxxxx>
- Re: [PATCH] gpio: tegra: drop tegra specific GPIO lockdep classes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/2] pinctrl: tegra: define GPIO compatible node per SoC
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] gpiolib: probe deferral error reporting
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] gpio: tegra: Fix tegra_gpio_irq_set_type()
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [Linux-kernel] [PATCH 3/4] ASoC: tegra: Allow 32-bit and 24-bit samples
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] ASoC: tegra: Allow 32-bit and 24-bit samples
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Ming Lei <ming.lei@xxxxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- [PATCH] ASoC: tegra_alc5632: fix device_node refcounting
- From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Jens Axboe <axboe@xxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Joerg Roedel <joro@xxxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Joerg Roedel <joro@xxxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH 3/4] ASoC: tegra: Allow 32-bit and 24-bit samples
- From: Jorge Sanjuan <jorge.sanjuan@xxxxxxxxxxxxxxx>
- [PATCH 0/4] ASoC: Tegra30 TDM support
- From: Jorge Sanjuan <jorge.sanjuan@xxxxxxxxxxxxxxx>
- [PATCH 2/4] ASoC: tegra: Add a TDM configuration callback
- From: Jorge Sanjuan <jorge.sanjuan@xxxxxxxxxxxxxxx>
- [PATCH 4/4] ASoC: tegra: i2s: Add support for more than 2 channels
- From: Jorge Sanjuan <jorge.sanjuan@xxxxxxxxxxxxxxx>
- [PATCH 1/4] ASoC: tegra: i2s: Fix typo/broken macro
- From: Jorge Sanjuan <jorge.sanjuan@xxxxxxxxxxxxxxx>
- Re: [PATCH v1] iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCH v2 03/10] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Joerg Roedel <joro@xxxxxxxxxx>
- Re: [Linux-kernel] tegra clock updates and fixes
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 02/10] dt-bindings: mmc: tegra: Add nvidia,only-1-8-v property
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH v1] iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
- From: Joerg Roedel <joro@xxxxxxxxxx>
- Re: [PATCH v2] mfd: as3722: disable auto power on when AC OK
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [RFC PATCH v1 2/6] of/device: Don't back devices DMA with IOMMU if that's undesired by driver
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [RFC PATCH v1 1/6] driver core: Add option for disabling of backing devices DMA with IOMMU
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [RFC PATCH v1 4/6] gpu: host1x: Avoid implicit DMA backing with IOMMU
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [RFC PATCH v1 6/6] Revert "drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping"
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [RFC PATCH v1 5/6] drm/nouveau: tegra: Universally avoid implicit DMA backing with IOMMU
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [RFC PATCH v1 3/6] drm/tegra: Avoid implicit DMA backing with IOMMU
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [RFC PATCH v1 0/6] Resolve unwanted DMA backing with IOMMU
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v1] iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH] clk: tegra: probe deferral error reporting
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH v2 2/2] clk: tegra: Correct clk_out_mux parents
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Stefan Agner <stefan@xxxxxxxx>
- [PATCH] gpio: tegra: drop tegra specific GPIO lockdep classes
- From: Stefan Agner <stefan@xxxxxxxx>
- [PATCH 1/2] pinctrl: tegra: define GPIO compatible node per SoC
- From: Stefan Agner <stefan@xxxxxxxx>
- [PATCH 2/2] ARM: tegra: readd gpio-ranges properties
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [Linux-kernel] tegra clock updates and fixes
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH 3/3] mmc: tegra: prevent ACMD23 on Tegra 3
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH] drm/tegra: return with probe defer if GPIO subsystem is not ready
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH v2 03/10] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [Linux-kernel] tegra clock updates and fixes
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 02/10] dt-bindings: mmc: tegra: Add nvidia,only-1-8-v property
- From: Stefan Agner <stefan@xxxxxxxx>
- [PATCH v2 00/10] Tegra SDHCI update the pad autocal procedure
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 01/10] mmc: tegra: Poll for calibration completion
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 03/10] mmc: tegra: Power on the calibration pad
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 05/10] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 06/10] mmc: tegra: Program pad autocal offsets from dt
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 09/10] mmc: tegra: Perform pad calibration after voltage switch
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 08/10] arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 07/10] arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 10/10] mmc: tegra: Enable pad calibration on Tegra210 and Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 04/10] mmc: tegra: Disable card clock during pad calibration
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 02/10] mmc: tegra: Set calibration pad voltage reference
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 00/10] Tegra SDHCI enable 1.8 V signaling on Tegar210 and Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 03/10] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 02/10] dt-bindings: mmc: tegra: Add nvidia,only-1-8-v property
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 04/10] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 06/10] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 05/10] arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 07/10] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 10/10] arm64: dts: tegra186: Add nvidia,only-1-8-v to sdmmc4
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 09/10] arm64: dts: tegra210: Add nvidia,only-1-8-v to sdmmc4
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 08/10] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2 01/10] dt-bindings: mmc: tegra: Add pad voltage control properties
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 1/7] clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: tegra20/tegra30: add pmu interrupt-affinity
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH 1/2] ARM: dts: tegra20: restore address order
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH v2 1/2] clk: tegra: Fix const for clk_out parents
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH v2 1/2] clk: tegra: Fix const for clk_out parents
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH v2 2/2] clk: tegra: Correct clk_out_mux parents
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH 13/26] ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH] clk: tegra: probe deferral error reporting
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH 13/15] ARM: tegra: apalis-tk1: fix pcie switch vendor compatible
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH] clk: tegra: probe deferral error reporting
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH 02/15] ARM: tegra: apalis-tk1: reorder pcie properties
- From: Stefan Agner <stefan@xxxxxxxx>
- Re: [PATCH] clk: tegra: probe deferral error reporting
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH] clk: tegra: probe deferral error reporting
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 2/2] clk: tegra: Correct clk_out_mux parents
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 1/2] clk: tegra: Fix const for clk_out parents
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v6 4/4] clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v6 3/4] clk: tegra: Add sdmmc mux divider clock
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v6 2/4] clk: tegra: Refactor fractional divider calculation
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v6 1/4] clk: tegra: Fix includes required by fence_udelay()
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Jens Axboe <axboe@xxxxxxxxx>
- Re: [PATCH v2] pinctrl: tegra: fix spelling in devicetree binding document
- From: Rob Herring <robh@xxxxxxxxxx>
- [Regression] Linux-Next Merge 25Jul2018 breaks mmc on Tegra.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH v3 2/2] Add support for CPCAP regulators on Motorola Xoom devices.
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 00/10] Update the pad autocal procedure
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 10/10] mmc: tegra: Enable pad calibration on Tegra210 and Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 00/10] Update the pad autocal procedure
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 15/26] ARM: tegra: colibri_t30: add i2c-thermtrip
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH 22/28] ARM: tegra: apalis_t30: add i2c-thermtrip
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH 09/10] mmc: tegra: Perform pad calibration after voltage switch
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 02/10] mmc: tegra: Set calibration pad voltage reference
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 01/28] ARM: tegra: apalis_t30: enable broken-hpi on emmc
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH 2/7] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 7/7] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 09/10] mmc: tegra: Perform pad calibration after voltage switch
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 06/10] mmc: tegra: Program pad autocal offsets from dt
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 05/10] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 04/10] mmc: tegra: Disable card clock during pad calibration
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 03/10] mmc: tegra: Power on the calibration pad
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 02/10] mmc: tegra: Set calibration pad voltage reference
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 01/10] mmc: tegra: Poll for calibration completion
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 7/7] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 6/7] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 5/7] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 4/7] arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 3/7] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 1/7] dt-bindings: Document Tegra SDHCI pinctrl bindings
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH 2/7] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH v1] media: staging: tegra-vde: Replace debug messages with trace points
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v1] media: staging: tegra-vde: Replace debug messages with trace points
- From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
- Re: [PATCH v1] media: staging: tegra-vde: Replace debug messages with trace points
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v1] media: staging: tegra-vde: Replace debug messages with trace points
- From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
- Re: RFC: tegra2/tegra3 automotive part changes
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v5 8/8] memory: tegra: Introduce Tegra20 EMC driver
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v5 7/8] clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v5 6/8] clk: tegra20: Turn EMC clock gate into divider
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v5 5/8] ARM: dts: tegra20: Add clock entry to External Memory Controller
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v5 4/8] ARM: dts: tegra20: Add interrupt entry to External Memory Controller
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v5 3/8] dt: bindings: Move tegra20-emc binding to memory-controllers directory
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v5 2/8] dt: bindings: tegra20-emc: Document clock property
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v5 1/8] dt: bindings: tegra20-emc: Document interrupt property
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v5 0/8] Tegra20 External Memory Controller driver
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v2] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v3 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 01/28] ARM: tegra: apalis_t30: enable broken-hpi on emmc
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 03/10] mmc: tegra: Power on the calibration pad
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 06/10] mmc: tegra: Program pad autocal offsets from dt
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 05/10] dt-bindings: Add Tegra SDHCI pad pdpu offset bindings
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 07/10] arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 09/10] mmc: tegra: Perform pad calibration after voltage switch
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 08/10] arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 04/10] mmc: tegra: Disable card clock during pad calibration
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 02/10] mmc: tegra: Set calibration pad voltage reference
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH 01/10] mmc: tegra: Poll for calibration completion
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 00/10] Update the pad autocal procedure
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 01/28] ARM: tegra: apalis_t30: enable broken-hpi on emmc
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH 01/28] ARM: tegra: apalis_t30: enable broken-hpi on emmc
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v3 2/2] Add support for CPCAP regulators on Motorola Xoom devices.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH v3 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH v3 0/2] Add support for cpcap regulators on Tegra based Xoom devices.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 2/2 v2] Add support for CPCAP regulators on Tegra devices.
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH 15/15] ARM: tegra: apalis-tk1: reorder SD card properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 14/15] ARM: tegra: apalis-tk1: reorder cpu dfll clock properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 13/15] ARM: tegra: apalis-tk1: fix pcie switch vendor compatible
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 12/15] ARM: tegra: apalis-tk1: add toradex,apalis-tk1-v1.2 compatible
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 11/15] ARM: tegra: apalis-tk1: enable emmc ddr52 mode
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 10/15] ARM: tegra: apalis-tk1: add proper emmc vmmc and vqmmc supplies
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 09/15] ARM: tegra: apalis-tk1: reorder backlight properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 08/15] ARM: tegra: apalis-tk1: white-space clean-up
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 04/15] ARM: tegra: apalis-tk1: reorder padctl properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 07/15] ARM: tegra: apalis-tk1: drop unused pinmux label
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 06/15] ARM: tegra: apalis-tk1: add missing regulators
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 05/15] ARM: tegra: apalis-tk1: regulator clean-up
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 01/15] ARM: tegra: apalis-tk1: add local-mac-address property
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 03/15] ARM: tegra: apalis-tk1: reorder host1x/hdmi properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 02/15] ARM: tegra: apalis-tk1: reorder pcie properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 00/15] ARM: dts: tegra: apalis-tk1: major revamp
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- Re: [PATCH] drm/tegra: hdmi: probe deferral error reporting
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- Re: [PATCH 2/2 v2] Add support for CPCAP regulators on Tegra devices.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 2/2 v2] Add support for CPCAP regulators on Tegra devices.
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH] drm/tegra: hdmi: probe deferral error reporting
- From: Lucas Stach <dev@xxxxxxxxxx>
- Re: [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 08/12] i2c: tegra: use core to detect 'no zero length' quirk
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH 2/2 v2] Add support for CPCAP regulators on Tegra devices.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH 1/2 v2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH 0/2 v2] Add support for cpcap regulators on Tegra devices.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 2/2] Add support for CPCAP regulators on Tegra devices.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH 0/2 V1] Add support for cpcap regulators on Tegra devices.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH 00/26] ARM: dts: tegra: colibri_t30: major revamp
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 03/26] ARM: tegra: colibri_t30: reorder host1x/hdmi properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 02/26] ARM: tegra: colibri_t30: add local-mac-address property
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 01/26] ARM: tegra: colibri_t30: enable broken-hpi on emmc
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 05/26] ARM: tegra: colibri_t30: add missing regulators
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 04/26] ARM: tegra: colibri_t30: regulator clean-up
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 06/26] ARM: tegra: colibri_t30: annotate uarts
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 08/26] ARM: tegra: colibri_t30: move dr_mode property from phy to controller
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 07/26] ARM: tegra: colibri_t30: white-space clean-up
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 09/26] ARM: tegra: colibri_t30: reorder backlight properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 10/26] ARM: tegra: colibri_t30: drop pwmleds
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 11/26] ARM: tegra: colibri_t30: pinmux clean-up
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 12/26] ARM: tegra: colibri_t30: add missing pinmux
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 13/26] ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 14/26] ARM: tegra: colibri_t30: further lm95245 temperature sensor annotation
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 16/26] ARM: tegra: colibri_t30: add proper emmc vmmc and vqmmc supplies
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 17/26] ARM: tegra: colibri_t30: enable emmc ddr52 mode
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 15/26] ARM: tegra: colibri_t30: add i2c-thermtrip
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 19/26] ARM: tegra: colibri_t30: line break long compatible property line
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 20/26] ARM: tegra: colibri_t30: move input include to carrier board
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 18/26] ARM: tegra: colibri_t30: rename clk to clock
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 24/26] ARM: tegra: colibri_t30: annotate sd card detect
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 23/26] ARM: tegra: colibri_t30: enable hda over hdmi
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 22/26] ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 21/26] ARM: tegra: colibri_t30: remove unused nvidia,is-wired property
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 25/26] ARM: tegra: colibri_t30: annotate ehci instance 1
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 26/26] ARM: tegra: colibri_t30: update compatibility comment
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- Re: [RESEND] stable request: 4.4.y: 797097301860 ("clk: tegra: Fix PLL_U post divider and initial rate on Tegra30")
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 2/8] clk: tegra: host1x has fractional divider
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/8] clk: tegra: host1x has fractional divider
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] apalis_t30: fix can2
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [RESEND] stable request: 4.4.y: 797097301860 ("clk: tegra: Fix PLL_U post divider and initial rate on Tegra30")
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: stable request: 4.4.y: 797097301860 ("clk: tegra: Fix PLL_U post divider and initial rate on Tegra30")
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- [RESEND] stable request: 4.4.y: 797097301860 ("clk: tegra: Fix PLL_U post divider and initial rate on Tegra30")
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- stable request: 4.4.y: 797097301860 ("clk: tegra: Fix PLL_U post divider and initial rate on Tegra30")
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH] apalis_t30: fix can2
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 2/8] clk: tegra: host1x has fractional divider
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/8] clk: tegra: fix fractional clocks for VDI, VI, EPP, MPE, 2D and 3D
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH 2/8] clk: tegra: host1x has fractional divider
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH 03/28] ARM: tegra: apalis_t30: pull-up sd card detect pins
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 09/28] ARM: tegra: apalis_t30: add missing regulators
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 08/28] ARM: tegra: apalis_t30: regulator clean-up
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 07/28] ARM: tegra: apalis_t30: reorder host1x/hdmi properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 06/28] ARM: tegra: apalis_t30: annotate pcie port nodes
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 04/28] ARM: tegra: apalis_t30: add local-mac-address property
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 02/28] ARM: tegra: apalis_t30: fix mmc1 cmd pull-up
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 00/28] ARM: dts: tegra: apalis_t30: major revamp incl. v1.1 hardware support
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 10/28] ARM: tegra: apalis_t30: annotate uarts
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 15/28] ARM: tegra: apalis_t30: move dr_mode property from phy to controller
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 12/28] ARM: tegra: apalis_t30: white-space clean-up
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 16/28] ARM: tegra: apalis_t30: reorder backlight properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 17/28] ARM: tegra: apalis_t30: drop pwmleds
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 13/28] ARM: tegra: apalis_t30: drop unused mmc1/sd1 labels
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 18/28] ARM: tegra: apalis_t30: pinmux clean-up
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 23/28] ARM: tegra: apalis_t30: add proper emmc vmmc and vqmmc supplies
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 24/28] ARM: tegra: apalis_t30: enable emmc ddr52 mode
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 22/28] ARM: tegra: apalis_t30: add i2c-thermtrip
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 19/28] ARM: tegra: apalis_t30: add missing pinmux
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 25/28] ARM: tegra: apalis_t30: rename clk to clock
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 26/28] ARM: tegra: apalis_t30: line break long compatible property line
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 28/28] ARM: tegra: apalis_t30: support v1.1 hardware revision
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 27/28] ARM: tegra: apalis_t30: fix pcie switch vendor compatible
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 21/28] ARM: tegra: apalis_t30: further lm95245 temperature sensor annotation
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 20/28] ARM: tegra: apalis_t30: use proper irq-gpio for stmpe811
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 14/28] ARM: tegra: apalis_t30: annotate mmc1/sd1
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 11/28] ARM: tegra: apalis_t30: drop unused cami2c label
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 05/28] ARM: tegra: apalis_t30: reorder pcie properties
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 01/28] ARM: tegra: apalis_t30: enable broken-hpi on emmc
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- Re: [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v4 6/8] clk: tegra20: Turn EMC clock gate into divider
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 4/7] arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH 2/2] Add support for CPCAP regulators on Tegra devices.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH 1/2] Add sw2_sw4 voltage table to cpcap regulator.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- [PATCH 0/2] Add support for cpcap regulators on Tegra devices.
- From: Peter Geis <pgwipeout@xxxxxxxxx>
- Re: [PATCH 3/7] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH 1/2] ARM: dts: tegra20: restore address order
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 2/2] ARM: dts: tegra20/tegra30: add pmu interrupt-affinity
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 5/6] ARM: multi_v7_defconfig: enable tegra raw nand driver
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 3/6] ARM: multi_v7_defconfig: enable dynamic debug
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 2/6] ARM: multi_v7_defconfig: update order
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 4/6] ARM: defconfig: tegra: enable dynamic debug
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 6/6] ARM: defconfig: tegra: enable tegra raw nand driver
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 1/6] ARM: config: multi_v5: enable dynamic debug
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 7/8] clk: tegra: replace warn on with single line
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH 3/8] clk: tegra: fix fractional clocks for VDI, VI, EPP, MPE, 2D and 3D
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH 5/8] clk: tegra: add mux-only clock option
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH 6/8] clk: tegra30: add 2d and 3d idle clocks
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH 8/8] clk: tegra: show clock name in error from _calc_rate
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH 1/8] clk: tegra: implement reset status callback
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH 2/8] clk: tegra: host1x has fractional divider
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH 4/8] clk: tegra: fix MUX_I2S_SPDIF macro
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- tegra clock updates and fixes
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH] ASoC: wm9712: fix replace codec to component
- From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH 7/7] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 6/7] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 5/7] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 4/7] arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 3/7] arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 2/7] mmc: tegra: Reconfigure pad voltages during voltage switching
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 1/7] dt-bindings: Document Tegra SDHCI pinctrl bindings
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH 0/7] Tegra SDHCI enable 1.8 V signaling on Tegar210 and Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Applied "ASoC: tegra: improve goto error label" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- [PATCH v5 1/7] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v5 2/7] soc/tegra: pmc: Factor out DPD register bit calculation
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v5 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v5 4/7] soc/tegra: pmc: Use X macro to generate IO pad tables
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v5 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v5 6/7] soc/tegra: pmc: Remove public pad voltage APIs
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v5 7/7] soc/tegra: pmc: Implement pad configuration via pinctrl
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v5 0/7] Tegra PMC pinctrl pad configuration
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: RFC: tegra2/tegra3 automotive part changes
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH] ASoC: wm9712: fix replace codec to component
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- Re: [PATCH v2] pinctrl: tegra: fix spelling in devicetree binding document
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH] ASoC: wm9712: fix replace codec to component
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [PATCH] pinctrl: tegra: fix spelling in devicetree binding document
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- [PATCH v2] pinctrl: tegra: fix spelling in devicetree binding document
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- Re: [PATCH] pinctrl: tegra: fix spelling in devicetree binding document
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- [PATCH 1/2] ASoC: tegra: improve goto error label
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH 2/2] ASoC: tegra: probe deferral error reporting
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- Re: [PATCH v1] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- [PATCH] gpiolib: probe deferral error reporting
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH] clk: tegra: probe deferral error reporting
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH] drm/tegra: hdmi: probe deferral error reporting
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH] ASoC: wm9712: fix replace codec to component
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- [PATCH] pinctrl: tegra: fix spelling in devicetree binding document
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: tegra: apalis-tk1: Add SPDX license (GPL-2.0 OR X11) identifiers
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/3] ARM: tegra: apalis-tk1: Add SPDX license (GPL-2.0 OR X11) identifiers
- From: Philippe Ombredanne <pombredanne@xxxxxxxx>
- Re: [PATCH v1] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v1] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH] clk: tegra: Fixes for MBIST work around
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH v2 2/2] clk: tegra: Correct clk_out_mux parents
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH] gpio: tegra: Fix tegra_gpio_irq_set_type()
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- [PATCH] clk: tegra: Fixes for MBIST work around
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- [PATCH v2 2/2] clk: tegra: Correct clk_out_mux parents
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- [PATCH v2 1/2] clk: tegra: Fix const for clk_out parents
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- [PATCH v2 0/2] Correct clk_out_mux parents
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- [PATCH v1] memory: tegra: Don't invoke Tegra30+ specific memory timing setup on Tegra20
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v4 3/8] dt: bindings: Move tegra20-emc binding to memory-controllers directory
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v4 2/8] dt: bindings: tegra20-emc: Document clock property
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v4 0/8] Tegra20 External Memory Controller driver
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v4 6/8] clk: tegra20: Turn EMC clock gate into divider
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v4 4/8] ARM: dts: tegra20: Add interrupt entry to External Memory Controller
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v4 1/8] dt: bindings: tegra20-emc: Document interrupt property
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v4 7/8] clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v4 8/8] memory: tegra: Introduce Tegra20 EMC driver
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v4 5/8] ARM: dts: tegra20: Add clock entry to External Memory Controller
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH v4 1/7] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v4 3/7] soc/tegra: pmc: Implement tegra_io_pad_is_powered()
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v4 2/7] soc/tegra: pmc: Factor out DPD register bit calculation
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v4 4/7] soc/tegra: pmc: Use X macro to generate IO pad tables
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v4 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v4 7/7] soc/tegra: pmc: Implement pad configuration via pinctrl
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v4 6/7] soc/tegra: pmc: Remove public pad voltage APIs
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v4 0/7] Tegra PMC pinctrl pad configuration
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH] clk: tegra: Correct clk_out_mux parents
- From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
- Re: [PATCH 1/3] ARM: tegra: apalis-tk1: Fix SPDX license identifier format
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] ARM: tegra: apalis-tk1: Fix SPDX license identifier format
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: tegra: apalis-tk1: Add SPDX license (GPL-2.0 OR X11) identifiers
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH 3/3] ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH 1/3] ARM: tegra: apalis-tk1: Fix SPDX license identifier format
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- [PATCH 3/3] ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/3] ARM: tegra: apalis-tk1: Add SPDX license (GPL-2.0 OR X11) identifiers
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 1/3] ARM: tegra: apalis-tk1: Fix SPDX license identifier format
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
- From: "David R. Piegdon" <lkml@xxxxxxxx>
- Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v2] mtd: rawnand: tegra: check bounds of die_nr properly
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- [PATCH] gpio: tegra: Fix tegra_gpio_irq_set_type()
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH v2] media: staging: tegra-vde: Replace debug messages with trace points
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- [PATCH] drm/tegra: Replace drm_dev_unref with drm_dev_put
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH v2] mtd: rawnand: tegra: check bounds of die_nr properly
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
- Re: [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: REGRESSION: [PATCHv2 2/2] mm: Drop unneeded ->vm_ops checks
- From: "Kirill A. Shutemov" <kirill@xxxxxxxxxxxxx>
- Re: REGRESSION: [PATCHv2 2/2] mm: Drop unneeded ->vm_ops checks
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: Add Tegra PMC pad configuration bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
- From: LABBE Corentin <clabbe@xxxxxxxxxxxx>
- Re: Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
- From: Mikko Perttunen <cyndis@xxxxxxxx>
- Re: Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
- From: LABBE Corentin <clabbe@xxxxxxxxxxxx>
- [PATCH] mmc: tegra: Force correct divider calculation on DDR50/52
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: REGRESSION: [PATCHv2 2/2] mm: Drop unneeded ->vm_ops checks
- From: "Kirill A. Shutemov" <kirill.shutemov@xxxxxxxxxxxxxxx>
- REGRESSION: [PATCHv2 2/2] mm: Drop unneeded ->vm_ops checks
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Crash with "ata: ahci_platform: convert kcalloc to devm_kcalloc"
- From: Mikko Perttunen <mperttunen@xxxxxxxxxx>
- Re: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 1/3] mmc: tegra: prevent HS200 on Tegra 3
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [GIT PULL 3/5] firmware: tegra: Changes for v4.19-rc1
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 2/5] memory: tegra: Changes for v4.19-rc1
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 5/5] arm64: tegra: Device tree changes for v4.19-rc1
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 4/5] ARM: tegra: Device tree changes for v4.19-rc1
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [GIT PULL 1/5] dt-bindings: tegra: Changes for v4.19-rc1
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: RFC: tegra2/tegra3 automotive part changes
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: [PATCH 1/3] mmc: tegra: prevent HS200 on Tegra 3
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: NVIDIA Tegra changes for v4.19-rc1
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: REGRESSION: [PATCH] mmc: tegra: Use sdhci_pltfm_clk_get_max_clock
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- [PATCH] mmc: tegra: Add and use tegra_sdhci_get_max_clock()
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: REGRESSION: [PATCH] mmc: tegra: Use sdhci_pltfm_clk_get_max_clock
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: RFC: tegra2/tegra3 automotive part changes
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- [PATCH] serial8250 on tegra hsuart: recover from spurious interrupts due to tegra2 silicon bug
- From: "David R. Piegdon" <lkml@xxxxxxxx>
- Re: RFC: tegra2/tegra3 automotive part changes
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: REGRESSION: [PATCH] mmc: tegra: Use sdhci_pltfm_clk_get_max_clock
- From: Aapo Vienamo <avienamo@xxxxxxxxxx>
- Re: RFC: tegra2/tegra3 automotive part changes
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- REGRESSION: [PATCH] mmc: tegra: Use sdhci_pltfm_clk_get_max_clock
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- Re: [RESEND PATCH] mmc: tegra: enable ddr_signaling for MMC_TIMING_MMC_DDR52
- From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
- [RESEND PATCH] mmc: tegra: enable ddr_signaling for MMC_TIMING_MMC_DDR52
- From: Tamás Szűcs <tszucs@xxxxxxxxxxxxx>
- Re: NVIDIA Tegra changes for v4.19-rc1
- From: Olof Johansson <olof@xxxxxxxxx>
[Index of Archives]
[ARM Kernel]
[Linux ARM]
[Linux ARM MSM]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]