On 10/19/18 4:22 PM, Jon Hunter wrote: > From: Jonathan Hunter <jonathanh@xxxxxxxxxx> > > The tps6586x driver creates an irqchip that is used by its various child > devices for managing interrupts. The tps6586x-rtc device is one of its > children that uses the tps6586x irqchip. When using the tps6586x-rtc as > a wake-up device from suspend, the following is seen: > > PM: Syncing filesystems ... done. > Freezing user space processes ... (elapsed 0.001 seconds) done. > OOM killer disabled. > Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. > Disabling non-boot CPUs ... > Entering suspend state LP1 > Enabling non-boot CPUs ... > CPU1 is up > tps6586x 3-0034: failed to read interrupt status > tps6586x 3-0034: failed to read interrupt status > > The reason why the tps6586x interrupt status cannot be read is because > the tps6586x interrupt is not masked during suspend and when the > tps6586x-rtc interrupt occurs, to wake-up the device, the interrupt is > seen before the i2c controller has been resumed in order to read the > tps6586x interrupt status. > > The tps6586x-rtc driver sets it's interrupt as a wake-up source during > suspend, which gets propagated to the parent tps6586x interrupt. > However, the tps6586x-rtc driver cannot disable it's interrupt during > suspend otherwise we would never be woken up and so the tps6586x must > disable it's interrupt instead. > > Prevent the tps6586x interrupt handler from executing on exiting suspend > before the i2c controller has been resumed by disabling the tps6586x > interrupt on entering suspend and re-enabling it on resuming from > suspend. > > Cc: stable@xxxxxxxxxxxxxxx > > Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx> > --- Tested patch on linux-next and v4.14, works fine. Thank you! Reviewed-by: Dmitry Osipenko <digetx@xxxxxxxxx> Tested-by: Dmitry Osipenko <digetx@xxxxxxxxx>
