On Sun, Sep 02, 2018 at 12:08:29PM +0200, Marcel Ziswiler wrote: > This series is a major overhaul and adds support for the Colibri > Evaluation Board device tree. > > Changes in v2: > - Fix commit message which was mixed up between "[PATCH 03/31] ARM: > tegra: colibri_t20: iris: annotate i2c busses" and "[PATCH 04/31] ARM: > tegra: colibri_t20: iris: add missing aliases". > - Also replace underscores in node names with dashes. > - Also reflect this change in the Iris device tree. > - Also reflect this change in the device tree bindings documentation. > - New patch as suggested by Rob. > - New patch. > - Get rid of fake clocks simple bus as suggested by Rob. > - Updated evaluation board device tree with all applicable previous > fixes. > - Also reflect this addition in the device tree bindings documentation. > > Marcel Ziswiler (37): > ARM: tegra: colibri_t20: move aliases from module to carrier board > ARM: tegra: colibri_t20: iris: integrate i2c real time clock support > ARM: tegra: colibri_t20: iris: add missing aliases > ARM: tegra: colibri_t20: iris: annotate i2c busses > ARM: tegra: colibri_t20: add local-mac-address property > ARM: tegra: colibri_t20: reorder host1x/hdmi properties > ARM: tegra: colibri_t20: iris: use no-1-8-v > ARM: tegra: colibri_t20: regulator clean-up > ARM: tegra: colibri_t20: add missing regulators > ARM: tegra: colibri_t20: annotate usb ehci instances > ARM: tegra: colibri_t20: remove phy-reset-gpio from controller node > ARM: tegra: colibri_t20: indentation/line-feed/white-space clean-up > ARM: tegra: colibri_t20: update sound nvidia,model > ARM: tegra: colibri_t20: pinmux clean-up > ARM: tegra: colibri_t20: add missing pinmux > ARM: tegra: colibri_t20: iris: display controller rgb panel support > ARM: tegra: colibri_t20: iris: annotate uarts > ARM: tegra: colibri_t20: iris: add uart-c > ARM: tegra: colibri_t20: use high speed uart driver > ARM: tegra: colibri_t20: iris: add gpio wakeup key > ARM: tegra: colibri_t20: iris: add dr_mode property > ARM: tegra: colibri_t20: annotate/rename lm95245 temperature sensor > ARM: tegra: colibri_t20: add i2c-thermtrip > ARM: tegra: colibri_t20: add gpio hog to unreset usb ethernet chip > ARM: tegra: colibri_t20: add gpio hogs for gmi_wr_n buffers > ARM: tegra: colibri_t20: annotate/move sd card detect > ARM: tegra: colibri_t20: add compatibility comment > ARM: tegra: colibri_t20: simplify model and compatible properties > ARM: tegra: colibri_t20: iris: simplify model and compatible > properties > ARM: tegra: colibri_t20: iris: add colibri ssp support > ARM: tegra: colibri_t20: drop module level model and compatible > ARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddc > ARM: tegra: colibri_t20: iris: drop unused i2c_ddc label > ARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic label > ARM: tegra: colibri_t20: get rid of fake clocks simple bus > ARM: tegra: colibri_t20: rename ac97 label to tegra_ac97 > ARM: tegra: colibri_t20: add eval board device tree > > Documentation/devicetree/bindings/arm/tegra.txt | 5 +- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 262 ++++++++++ > arch/arm/boot/dts/tegra20-colibri-iris.dts | 200 ++++++-- > arch/arm/boot/dts/tegra20-colibri.dtsi | 655 ++++++++++++++++-------- > 5 files changed, 866 insertions(+), 257 deletions(-) > create mode 100644 arch/arm/boot/dts/tegra20-colibri-eval-v3.dts Applied, thanks. All of these series together have got to be some kind of a record. Thierry
Attachment:
signature.asc
Description: PGP signature
