Linux Serial
[Prev Page][Next Page]
- Re: [PATCH RESEND 0/2] two serial_core suspend/resume fixes, (continued)
- [PATCH 0/2] two serial_core suspend/resume fixes--to,
Jason Wang
- Uartlite - poll support,
Michal Simek
- [PATCH 1/2] serial: 8250: Initialize pointer to irq_info,
Michal Simek
- One question about 8250 UART driver,
Yong Wang
- RS485: ioctls defined twice ?,
Claudio Scordino
- [PATCH] CRIS RS485: Check SER_RS485_RTS_BEFORE_SEND before delaying.,
Claudio Scordino
- [GIT PULL] arch/cris changes for 2.6.36,
Jesper Nilsson
- [PATCH] serial: Add CONSOLE_POLL support for uartlite,
Michal Simek
- [PATCH 13/18] pcmcia: remove memreq_t,
Dominik Brodowski
- [PATCH 10/18] pcmcia: do not use io_req_t after call to pcmcia_request_io(),
Dominik Brodowski
- [PATCH 06/18] pcmcia: remove cs_types.h,
Dominik Brodowski
- [PATCH 07/18] pcmcia: use pcmica_{read,write}_config_byte,
Dominik Brodowski
- [PATCH 11/18] pcmcia: do not use io_req_t when calling pcmcia_request_io(),
Dominik Brodowski
- Message not available
Message not available
Message not available
[PATCH] serial: samsung: fix device name,
Darius Augulis
Driver for kontron PMC-6L interface card,
Pavel Machek
[PATCH 07/11] pcmcia: remove memreq_t,
Dominik Brodowski
[PATCH 04/11] pcmcia: do not use io_req_t after call to pcmcia_request_io(),
Dominik Brodowski
[PATCH 05/11] pcmcia: do not use io_req_t when calling pcmcia_request_io(),
Dominik Brodowski
[PATCH 01/11] pcmcia: use pcmica_{read,write}_config_byte,
Dominik Brodowski
[RESEND PATCH] max3107: Fix gpiolib support,
Alan Cox
[PATCH 0/4] Medfield HSU serial,
Alan Cox
[PATCH 6/6] pcmcia: remove cs_types.h,
Dominik Brodowski
Need software UART implementation,
Andrew Pushkin
[patch 7/7] drivers/serial/68328serial.c: remove dead (ALMA_ANS | DRAGONIXVZ | M68EZ328ADS),
akpm
[patch 6/7] timbuart: use __devinit and __devexit macros for probe and remove,
akpm
[patch 3/7] serial: general fixes in the serial_rs485 structure,
akpm
[patch 2/7] serial: fix missing bit coverage of ASYNC_FLAGS,
akpm
[patch 4/7] serial: mcf: don't take spinlocks in already protected functions,
akpm
[patch 5/7] serial: MMIO32 support for 8250_early.c,
akpm
[patch 1/7] "altera_uart: simplify altera_uart_console_putc()" checkpatch fixes,
akpm
Serial buffer question,
Manuel Jander
[PATCH 2/2] serial: 8250: remove SERIAL_8250_AU1X00,
Manuel Lauss
[PATCH v2] serial/imx: only parse for iomem resources once,
Jeremy Kerr
Is user space ldattach required?,
Jon Smirl
RFC: extending serial line disciplines to handle CTS changes.,
Ben Gardiner
[PATCH] timbuart: Use __devinit and __devexit macros for probe and remove,
Richard Röjfors
[PATCH 2/2] max3107: Abstract out the platform specific bits,
Alan Cox
[PATCH 1/2] Subject: [PATCH] max3107: introduce a max3107 driver,
Alan Cox
serial port communication problem with heavy CPU load,
Zhang, Yongchao (GE Healthcare)
[PATCH] parport/serial: add support for Timedia/SUNIX cards to parport_serial,
Frédéric Brière
kernel oops with Titan Electronics Inc VScom 800L,
Gerold Gruber
[PATCH 0/4] Further serial driver bits,
Alan Cox
[PATCH] serial: add UART_CAP_EFR and UART_CAP_SLEEP flags to 16C950 UARTs definition,
Yegor Yefremov
[PATCH 0/2] Moorestown serial consoles,
Alan Cox
[PATCH v3] serial: Add OMAP high-speed UART driver,
Govindraj.R
[PATCH v2] serial: add support for various Titan PCI cards,
Yegor Yefremov
[PATCH] serial: add support for various Titan PCI cards,
Yegor Yefremov
[PATCH] ARM: S5PV210: serial: Fix section mismatch warning,
Joonyoung Shim
serial/imx.c : wrong baudrate at resume if console is on UART,
Eric Bénard
[PATCH v2] serial: Add OMAP high-speed UART driver,
Govindraj.R
[PATCH 1/4 v2] serial: add a new port type, found on some sh-mobile SoCs,
Guennadi Liakhovetski
[PATCH 1/2] serial: bfin_5xx: IRDA is not affected by anomaly 05000230,
Mike Frysinger
[PATCH 0/4] sh-mobile SCIFB support,
Guennadi Liakhovetski
[PATCH] sh: fix Oops in the serial SCI driver,
Guennadi Liakhovetski
[PATCH 0/4] serial: move towards tty_port,
Alan Cox
[PATCH 0/3] Console preparatory work,
Alan Cox
[PATCH 0/3] Serial reference passing,
Alan Cox
[PATCH 00/11] BKL pruning and serial bug fixing,
Alan Cox
- [PATCH 01/11] tty: Fix the digi acceleport driver NULL checks,
Alan Cox
- [PATCH 02/11] stallion: prune lock_kernel calls,
Alan Cox
- [PATCH 03/11] istallion: use bit ops for the board flags,
Alan Cox
- [PATCH 04/11] riscom8: kill use of lock_kernel,
Alan Cox
- [PATCH 05/11] isicom: kill off the BKL,
Alan Cox
- [PATCH 06/11] rocket: kill BKL,
Alan Cox
- [PATCH 07/11] synclink: kill the big kernel lock,
Alan Cox
- [PATCH 08/11] cyclades: Kill off BKL usage,
Alan Cox
- [PATCH 09/11] epca: Kill the big kernel lock,
Alan Cox
- [PATCH 10/11] specialix; Kill the BKL,
Alan Cox
- [PATCH 11/11] synclink: reworking locking a bit,
Alan Cox
- Re: [PATCH 00/11] BKL pruning and serial bug fixing,
Greg KH
[PATCH 07/29] pcmcia: dev_node removal (write-only drivers),
Dominik Brodowski
[PATCH 05/29] pcmcia: re-work pcmcia_request_irq(),
Dominik Brodowski
[PATCH 10/25] kgdb,8250,pl011: Return immediately from console poll,
Jason Wessel
[PATCH] serial: SAMSUNG: Fix dev_name and driver_name,
Joonyoung Shim
[PATCH] serial: bfin_sport_uart: Use resource size to fix off-by-one error,
Tobias Klauser
[PATCH 01/20] stallion: prune lock_kernel calls,
Alan Cox
- [PATCH 10/20] synclink: reworking locking a bit,
Alan Cox
- [PATCH 15/20] tty: Make vt's have a tty_port,
Alan Cox
- [PATCH 16/20] tty: Move the vt_tty field from the vc_data into the standard tty_port,
Alan Cox
- [PATCH 20/20] serial: Use block_til_ready helper,
Alan Cox
- [PATCH 18/20] serial: add port helpers,
Alan Cox
- [PATCH 17/20] serial: Change the wait for carrier locking,
Alan Cox
- [PATCH 19/20] serial: trim locking on the helpers,
Alan Cox
- [PATCH 14/20] vc: Locking clean up,
Alan Cox
- [PATCH 13/20] tty: serial - fix tty referencing in set_ldisc,
Alan Cox
- [PATCH 12/20] tty: serial - fix tty back references in termios,
Alan Cox
- [PATCH 11/20] tty: serial - fix various misuses/mishandlings of port->tty,
Alan Cox
- [PATCH 09/20] specialix; Kill the BKL,
Alan Cox
- [PATCH 07/20] cyclades: Kill off BKL usage,
Alan Cox
- [PATCH 08/20] epca: Kill the big kernel lock,
Alan Cox
- [PATCH 06/20] synclink: kill the big kernel lock,
Alan Cox
- [PATCH 05/20] rocket: kill BKL,
Alan Cox
- [PATCH 03/20] riscom8: kill use of lock_kernel,
Alan Cox
- [PATCH 04/20] isicom: kill off the BKL,
Alan Cox
- [PATCH 02/20] istallion: use bit ops for the board flags,
Alan Cox
[PATCH v5 0/2] serial: Drivers for Altera UARTs,
Tobias Klauser
[PATCH RESEND] serial/mpc52xx_uart: Drop outdated comments,
Wolfram Sang
[PATCH] serial/imx: only parse for iomem resources once,
Jeremy Kerr
handling flow control for console device,
Kittlitz, Edward (Ned)
[PATCH -mm 0/1] max3100: Fixes for the MAX31x0 console,
christian pellegrin
[PATCH] [V4] uartlite: move from byte accesses to word accesses,
John Linn
[PATCH v4 0/2] serial: Drivers for Altera UARTs,
Tobias Klauser
Setting up KGDB environment on MIPS Processor.,
Prabhu Chawandi
Question in regard to generic USB Serial adapters,
Manuel Jander
[PATCH] tty: n_gsm line discipline,
Alan Cox
8250 wrong IRQs set after boot,
Toan Pham
[PATCH] KS8695: enable console,
Yegor Yefremov
[RFC PATCH] tty: n_gsm line discipline,
Alan Cox
[PATCH v1 1/4] max3100: added raise_threaded_irq,
Christian Pellegrin
[RFC PATCH 07/19] pcmcia: re-work pcmcia_request_irq(),
Dominik Brodowski
[RFC PATCH 09/19] pcmcia: dev_node removal (write-only drivers),
Dominik Brodowski
[PATCH 0/3] max3100: improvements,
christian pellegrin
[PATCH] [V3] uartlite: move from byte accesses to word accesses,
John Linn
[PATCH 0/2]: x86: Honor IO_DELAY IO port settings,
Simon Kagstrom
Re: spi-devel-general Digest, Vol 46, Issue 10,
christian pellegrin
[PATCH] serial: timbuart: Make sure last byte is sent when port is closed,
Richard Röjfors
Re: [PATCH] serial: Two branches the same in timbuart_set_mctrl(),
Richard Röjfors
'struct uart_port' has no member named 'info,
rogerx
[PATCH 00/13] Blackfin SPORT UART updates,
Mike Frysinger
- [PATCH 04/13] serial: bfin_sport_uart: add missing mapbase initialization,
Mike Frysinger
- [PATCH 11/13] serial: bfin_sport_uart: pull in bfin_sport.h for SPORT defines,
Mike Frysinger
- [PATCH 06/13] serial: bfin_sport_uart: add support for CTS/RTS via GPIOs,
Mike Frysinger
- [PATCH 12/13] serial: bfin_sport_uart: drop the experimental markings,
Mike Frysinger
- [PATCH 13/13] serial: bfin_sport_uart: drop redundant cpu depends,
Mike Frysinger
- [PATCH 07/13] serial: bfin_sport_uart: protect changes to uart_port,
Mike Frysinger
- [PATCH 10/13] serial: bfin_sport_uart: only enable SPORT TX if data is to be sent,
Mike Frysinger
- [PATCH 09/13] serial: bfin_sport_uart: drop useless status masks,
Mike Frysinger
- [PATCH 08/13] serial: bfin_sport_uart: zero sport_uart_port if allocated dynamically,
Mike Frysinger
- [PATCH 02/13] serial: bfin_sport_uart: shorten the SPORT TX waiting loop,
Mike Frysinger
- [PATCH 03/13] serial: bfin_sport_uart: remove unused peripheral pin lists,
Mike Frysinger
- [PATCH 05/13] serial: bfin_sport_uart: rename early platform driver class string,
Mike Frysinger
- [PATCH 01/13] serial: bfin_sport_uart: work around anomaly 05000473 (make 32bit fifo read atomic),
Mike Frysinger
SIIG DP CyberSerial 4S PCIe Support,
James Lamanna
[PATCHv3 0/2] serial: Drivers for Altera UARTs,
Tobias Klauser
Reposting: [PATCH v1] serial: Add OMAP high-speed UART driver.,
Govindraj.R
[PATCH v6] serial: spi: add spi-uart driver for Maxim 3110,
Feng Tang
KS8695: enable console,
Yegor Yefremov
Disregard: [PATCH] tty: Char: mxser, add support for CP114EL,
Sergei Organov
[PATCH] tty: Char: mxser, add support for CP114EL,
Sergei Organov
[PATCH] serial: Add OMAP high-speed UART driver.,
Govindraj.R
[PATCHv2 0/2] serial: Drivers for Altera UARTs,
Tobias Klauser
[PATCH 45/49] pcmcia: handle error in serial_cs config calls,
Dominik Brodowski
[PATCH] 8250: add workaround for MPC8[356]xx UART break IRQ storm,
Paul Gortmaker
[PATCH 1/2] serial: Add driver for the Altera JTAG UART,
Tobias Klauser
[PATCH 00/14] Serial : sc26xx - generalize and support SC2892,
Martin Fuzzey
- [PATCH V2 01/14] Serial: Enable build of sc26xx driver for embedded platforms,
Martin Fuzzey
- [PATCH V2 02/14] Serial: sc26xx fix build errors.,
Martin Fuzzey
- [PATCH V2 03/14] Serial: sc26xx - use interrupt trigger flags from resources.,
Martin Fuzzey
- [PATCH V2 04/14] Serial: sc26xx - add accessor function for driver data.,
Martin Fuzzey
- [PATCH V2 05/14] Serial: sc26xx - refactor register access,
Martin Fuzzey
- [PATCH V2 06/14] Serial: sc26xx simplify timeout calculation,
Martin Fuzzey
- [PATCH V2 07/14] Serial: sc26xx - simplify port initialisation.,
Martin Fuzzey
- [PATCH V2 08/14] Serial: sc26xx - avoid endless loop with IRQs masked.,
Martin Fuzzey
- [PATCH V2 09/14] Serial: sc26xx - add support for SC2892 chips,
Martin Fuzzey
- [PATCH V2 10/14] Serial: sc26xx - introduce a structure for platform data.,
Martin Fuzzey
- [PATCH V2 11/14] Serial: sc26xx - initialise hardware if not done by bootloader,
Martin Fuzzey
- [PATCH V2 12/14] Serial: sc26xx - Use ttySC0 instead of ttySC205,
Martin Fuzzey
- [PATCH V2 13/14] Serial: sc26xx - Avoid null pointer dereference,
Martin Fuzzey
- [PATCH V2 14/14] Serial: sc26xx - rename to sc2xxx,
Martin Fuzzey
[RFC PATCH 0/2] serial 8250 platform PM hooks,
Manuel Lauss
[PATCH 0/6] Clean up tty buffering v page allocation,
Alan Cox
[PATCH 0/2] Implement DMA support for the sh-sci.c serial driver,
Guennadi Liakhovetski
[PATCH 2/6] pcmcia: handle error in serial_cs config calls,
Dominik Brodowski
[PATCH 1/5] tty: Add a function to insert a string of characters with the same flag,
Alan Cox
[PATCH] sdio_uart: Use kfifo instead of the messy circ stuff,
Alan Cox
[PATCH 1/3] nozomi: Add tty_port usage,
Alan Cox
[PATCH] timberdale: Remove dependancies,
Alan Cox
Intel 82801 DB LPC I/O ports trouble,
Stephan Fabel
[PATCH 00/12] Serial : sc26xx - generalize and support SC2892,
Martin Fuzzey
- [PATCH 01/12] Serial: Enable build of sc26xx driver for embedded platforms,
Martin Fuzzey
- [PATCH 02/12] Serial: sc26xx fix build errors.,
Martin Fuzzey
- [PATCH 03/12] Serial: sc26xx - use interrupt trigger flags from resources.,
Martin Fuzzey
- [PATCH 04/12] Serial: sc26xx - add accessor function for driver data.,
Martin Fuzzey
- [PATCH 05/12] Serial: sc26xx - refactor register access,
Martin Fuzzey
- [PATCH 06/12] Serial: sc26xx simplify timeout calculation,
Martin Fuzzey
- [PATCH 07/12] Serial: sc26xx - simplify port initialisation.,
Martin Fuzzey
- [PATCH 08/12] Serial: sc26xx - avoid endless loop with IRQs masked.,
Martin Fuzzey
- [PATCH 09/12] Serial: sc26xx - add support for SC2892 chips,
Martin Fuzzey
- [PATCH 10/12] Serial: sc26xx - introduce a structure for platform data.,
Martin Fuzzey
- [PATCH 11/12] Serial: sc26xx - initialise hardware if not done by bootloader,
Martin Fuzzey
- [PATCH 12/12] Avoid null pointer dereference,
Martin Fuzzey
- Re: [PATCH 00/12] Serial : sc26xx - generalize and support SC2892,
Thomas Bogendoerfer
Intel 82801 DB LPC / 6 serial ports, only 1 works,
sfabel
[PATCH 10/28] kgdb,8250,pl011: Return immediately from console poll,
Jason Wessel
Is there sens for patch which replace space-based indentation by tab-based indentation in files ftdi_sio.c and ftdi_sio.h,
Vitaly V. Ch
Review and minor fixes for ftdi_sio.c,
Vitaly V. Ch
Review and minor fixes for ftdi_sio.h,
Vitaly V. Ch
[PATCH 1/2] jsm: removing the uart structure and filename on error,
leitao
bcm63xx_uart updates for 2.6.34,
Maxime Bizon
[PATCH] uartlite: Fix crash when using as console,
Richard Röjfors
request for assistance: accessing ttys from kernel space,
William Hubbs
Re: [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars,
Wolfram Sang
[PATCH] [V2] uartlite: move from byte accesses to word accesses,
John Linn
[PATCH] uartlite: move from byte accesses to word accesses,
John Linn
[PATCH 12/40] kgdb,8250,pl011: Return immediately from console poll,
Jason Wessel
[PATCH] serial: 8250: Add cpufreq support,
Chaithrika U S
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Site Home]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]