----- Origineel bericht -----
Van: Tobias Klauser <tklauser@xxxxxxxxxx>
Datum: maandag, maart 15, 2010 10:21
Onderwerp: Re: [Nios2-dev] [PATCHv3 1/2] serial: Add driver for the Altera JTAG UART
Aan: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: nios2-dev@xxxxxxxxxxxxxxxxxxxx, gregkh@xxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, linux-serial@xxxxxxxxxxxxxxx
> On 2010-03-12 at 21:48:35 +0100, Andrew Morton
> <akpm@xxxxxxxxxxxxxxxxxxxx> wrote:
> > On Fri, 5 Mar 2010 17:52:22 +0100
> > Tobias Klauser <tklauser@xxxxxxxxxx> wrote:
> >
> > > Add an UART driver for the JTAG UART component available as a SOPC
> > > (System on Programmable Chip) component for Altera FPGAs.
> > >
> > > ...
> > >
> > > --- a/drivers/serial/Kconfig
> > > +++ b/drivers/serial/Kconfig
> > > @@ -1490,4 +1490,25 @@ config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
> > > help
> > > Support for running a console on the GRLIB APBUART
> > >
> > > +config SERIAL_ALTERA_JTAGUART
> > > + bool "Altera JTAG UART support"
> > > + select SERIAL_CORE
> > > + help
> > > + This driver supports the Altera JTAG UART port.
> > > +
> > > +config SERIAL_ALTERA_JTAGUART_CONSOLE
> > > + bool "Altera JTAG UART console support"
> > > + depends on SERIAL_ALTERA_JTAGUART
> > > + select SERIAL_CORE_CONSOLE
> > > + help
> > > + Enable a Altera JTAG UART port to be the system console.
> > > +
> > > +config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
> > > + bool "Bypass output when no connection"
> > > + depends on SERIAL_ALTERA_JTAGUART_CONSOLE
> > > + select SERIAL_CORE_CONSOLE
> > > + help
> > > + Bypass console output and keep going even if there is no
> > > + JTAG terminal connection with the host.
> >
> > So this driver will be available on all CPU architectures.
> >
> > I'm guessing that the hardware _isn't_ available on all CPU
> > architectures? Maybe that's wrong.
>
> In principle it is available on all CPU. I can think of a hardware
> component with an Altera FPGA containing this UART. But at the moment
> no
> such implementation is known to me and the UART is only usable on the
> nios2 CPU architecture (which is not in mainline yet - we're planning
> to change that, submitting the arch-sepcific drivers is the first step
> towards this).
>
We are actually working on a project without a Nios2 where a PCIe core connected to a powerPC is the avalon-master. So I'm in favor of not getting everything too nios2 specific.
> > If this hardware is only available on certain CPUs then we face
> > tradeoffs. By making it universally available, the code gets better
> > compile tesst coverage and that can detect problems (usually minor
> > ones). otoh, it can increase your maintenance load a bit, and adds
> a
> > risk that people will ship unusable kernel modules and will see
> > increased build times. I have no particular opinion either way.
>
> I'd like to have this universally available if no one objects. It'd be
> nice to get better test coverage and I don't really mind the additional
> maintanance load. AFAICS other UART driver are only available on one
> single architecture too, so I hoped it would be fine to go the same way
> with the altera_{jtag,}uart drivers.
>
> > > endmenu
> > > diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> > > index 5548fe7..6228b6e 100644
> > > --- a/drivers/serial/Makefile
> > > +++ b/drivers/serial/Makefile
> > > @@ -82,3 +82,4 @@ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
> > > obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
> > > obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
> > > obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
> > > +obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
> > > diff --git a/drivers/serial/altera_jtaguart.c b/drivers/serial/altera_jtaguart.c
> > > new file mode 100644
> > > index 0000000..f9b49b5
> > > --- /dev/null
> > > +++ b/drivers/serial/altera_jtaguart.c
> > > @@ -0,0 +1,504 @@
> > > +/*
> > > + * altera_jtaguart.c -- Altera JTAG UART driver
> > > + *
> > > + * Based on mcf.c -- Freescale ColdFire UART driver
> > > + *
> > > + * (C) Copyright 2003-2007, Greg Ungerer <gerg@xxxxxxxxxxxx>
> > > + * (C) Copyright 2008, Thomas Chou <thomas@xxxxxxxxxxxxx>
> > > + * (C) Copyright 2010, Tobias Klauser <tklauser@xxxxxxxxxx>
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> modify
> > > + * it under the terms of the GNU General Public License as
> published by
> > > + * the Free Software Foundation; either version 2 of the License,
> or
> > > + * (at your option) any later version.
> > > + */
> > > +
> > > +#include <linux/kernel.h>
> > > +#include <linux/init.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/module.h>
> > > +#include <linux/console.h>
> > > +#include <linux/tty.h>
> > > +#include <linux/tty_flip.h>
> > > +#include <linux/serial.h>
> > > +#include <linux/serial_core.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/io.h>
> > > +#include <linux/altera_jtaguart.h>
> >
> > Does it make sense to put altera_jtaguart.h into include/linux? Could
> > we put it in drivers/serial/?
>
> It is stored in include/linux and not in drivers/serial because we need
> to include it from arch/nios2 for the platform device setup. Including
> <linux/altera_jtaguart.h> looks nicer than including
> "../drivers/serial/altera_jtaguart.h". The same holds true for the
> altera_uart driver.
>
> Thanks a lot,
> Tobias
> _______________________________________________
> Nios2-dev mailing list
> Nios2-dev@xxxxxxxxxxxxxxxxxxxx
> http://sopc.et.ntust.edu.tw/cgi-bin/mailman/listinfo/nios2-dev
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
