Hi,
I modified the code a little and run it on our HW platform, it really show
some sigh of life: it can boots to console (the print format is not so good),
I can input command and it execute correctly, but very slow, I type 3
characters and it takes about 2 seconds to echo back on screen and start the
execution, and after about 1 minute, the console hang there and input stopped
to work.
I also have some comments inline.
Thanks,
Feng
On Tue, 23 Mar 2010 18:29:30 +0800
Christian Pellegrin <chripell@xxxxxxxx> wrote:
> This patch adds console support for the MAX3100 UART
> (console=ttyMAX0,11500). The SPI subsystem and an
115200?
>
> +#ifdef CONFIG_SERIAL_MAX3100_CONSOLE
> +
> +static void max3100_console_work(struct work_struct *w)
> +{
> + struct max3100_port *s = container_of(w, struct max3100_port,
> + console_work);
> + unsigned long start;
> + u16 tx, rx;
> +
> + while (s->console_head != s->console_tail &&
> + (s->console_flags & MAX3100_SUSPENDING) == 0) {
> + start = jiffies;
> + do {
> + tx = MAX3100_RC;
> + max3100_sr(s, tx, &rx);
> + } while ((rx & MAX3100_T) == 0 &&
> + !time_after(jiffies, start +
> s->console_tout));
> + tx = s->console_buf[s->console_tail];
> + max3100_calc_parity(s, &tx);
> + tx |= MAX3100_WD | MAX3100_RTS;
Does this imply to have to work with HW flow control? on my platform
I have to remove the RTS bit to make it work.
> + max3100_sr(s, tx, &rx);
It doesn't handle received characters here? If the console is printing out
a bulk of message while user input some command, the command may be ignored.
Myself have met the same problem in our driver.
> + s->console_tail = (s->console_tail + 1) %
> CONSOLE_BUF_SIZE;
> + }
> +}
> +
> +static void max3100_console_putchar(struct uart_port *port, int ch)
> +{
> + struct max3100_port *s = to_max3100_port(port);
> + int next = (s->console_head + 1) % CONSOLE_BUF_SIZE;
> +
> + if (next != s->console_tail) {
> + s->console_buf[next] = ch;
> + s->console_head = next;
> + }
Also I saw max3100_sr() uses cpu_to_be16() and be16_to_cpu(), is it really
necessary, our platform is little-endian(x86), and I have to disable them
to make the code work. Is your test platform big-endian?
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
