Hi,
I recently purchased a SIIG DP CyberSerial 4S PCIe card, however the
kernel doesn't seem to recognize it.
There are no messages in dmesg or anything about it.
Currently I'm at 2.6.24, but looking at drivers/serial/8250_pci.c
between 2.6.24 and 2.6.32 there doesn't
seem to be real changes with SIIG cards.
Seems like other SIIG cards are supported, so are we just missing the
PCI IDs for this card?
Here's the lspci -nnvvvvvv output:
01:00.0 Serial controller [0700]: Oxford Semiconductor Ltd Unknown
device [1415:c208] (prog-if 06 [16950])
Subsystem: Siig Inc Unknown device [131f:2250]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=16K]
Region 1: Memory at fe600000 (32-bit, non-prefetchable) [size=2M]
Region 2: Memory at fe400000 (32-bit, non-prefetchable) [size=2M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <128ns, L1 <2us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=16
Vector table: BAR=1 offset=001b3000
PBA: BAR=1 offset=001b2000
Please CC me for I am not subscribed.
Thanks.
-- James
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
