The commit 4547be7 rewrites suspend and resume functions. According
to this rewrite, when a serial port is a printk console device and
can suspend(without set no_console_suspend flag), it will definitely
call set_termios function during its resume, but parameter termios
isn't initialized, this will pass an unpredictable config to the
serial port. If this serial port is not a userspace opened tty device
, a suspend and resume action will make this serial port unusable.
I.E. ttyS0 is a printk console device, ttyS1 or keyboard+display is
userspace tty device, a suspend/resume action will make ttyS0
unusable.
If a serial port is both a printk console device and an opened tty
device, this issue can be overcome because it will call set_termios
again with the correct parameter in the uart_change_speed function.
Refer to the deleted content of commit 4547be7, revert parts relate
to restore settings into parameter termios. It is safe because if
a serial port is a printk console only device, the only meaningful
field in termios is c_cflag and its old config is saved in
uport->cons->cflag, if this port is also an opened tty device,
it will clear uport->cons->cflag in the uart_open and the old config
is saved in tty->termios.
Signed-off-by: Jason Wang <jason77.wang@xxxxxxxxx>
---
drivers/serial/serial_core.c | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index ff21200..bc6cddd 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2066,6 +2066,18 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
* Re-enable the console device after suspending.
*/
if (console_suspend_enabled && uart_console(uport)) {
+ /*
+ * First try to use the console cflag setting.
+ */
+ memset(&termios, 0, sizeof(struct ktermios));
+ termios.c_cflag = uport->cons->cflag;
+
+ /*
+ * If that's unset, use the tty termios setting.
+ */
+ if (port->tty && port->tty->termios && termios.c_cflag == 0)
+ termios = *(port->tty->termios);
+
uart_change_pm(state, 0);
uport->ops->set_termios(uport, &termios, NULL);
console_start(uport->cons);
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
