These were all copied over from the Blackfin UART driver, but they don't
make sense here because these bits are all specific to the Blackfin UART.
Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
---
drivers/serial/bfin_sport_uart.c | 17 +----------------
1 files changed, 1 insertions(+), 16 deletions(-)
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 871f6fd..1b22c59 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -499,27 +499,12 @@ static void sport_set_termios(struct uart_port *port,
spin_lock_irqsave(&up->port.lock, flags);
- port->read_status_mask = OE;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= (FE | PE);
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= BI;
+ port->read_status_mask = 0;
/*
* Characters to ignore
*/
port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= FE | PE;
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= BI;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= OE;
- }
/* RX extract mask */
up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8);
--
1.7.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
