Byte accesses for I/O devices in Xilinx IP is going to be less
desired in the future such that the driver is being changed to
use 32 bit accesses.
This change facilitates using the uartlite IP over a PCIe bus
which only allows 32 bit accesses.
Signed-off-by: John Linn <john.linn@xxxxxxxxxx>
Tested-by: Michal Simek <monstr@xxxxxxxxx>
Acked-by: Grant Likely <grant.likely@xxxxxxxxxxxx>
---
V2 - updated the commit message based on Peter's comments
V3 - removed u8 casting based on Peter's comments, cleaned up and
simplified the change by using raw I/O functions rather than
using in_be32 & out_be32 functions.
V4 - changed the i/o functions being used based on Grant's feedback.
Updated so it will apply to top of tree.
---
drivers/serial/uartlite.c | 32 ++++++++++++++++----------------
1 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index f0a6c61..e6639a9 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -86,7 +86,7 @@ static int ulite_receive(struct uart_port *port, int stat)
/* stats */
if (stat & ULITE_STATUS_RXVALID) {
port->icount.rx++;
- ch = readb(port->membase + ULITE_RX);
+ ch = ioread32be(port->membase + ULITE_RX);
if (stat & ULITE_STATUS_PARITY)
port->icount.parity++;
@@ -131,7 +131,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
return 0;
if (port->x_char) {
- writeb(port->x_char, port->membase + ULITE_TX);
+ iowrite32be(port->x_char, port->membase + ULITE_TX);
port->x_char = 0;
port->icount.tx++;
return 1;
@@ -140,7 +140,7 @@ static int ulite_transmit(struct uart_port *port, int stat)
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return 0;
- writeb(xmit->buf[xmit->tail], port->membase + ULITE_TX);
+ iowrite32be(xmit->buf[xmit->tail], port->membase + ULITE_TX);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
port->icount.tx++;
@@ -157,7 +157,7 @@ static irqreturn_t ulite_isr(int irq, void *dev_id)
int busy, n = 0;
do {
- int stat = readb(port->membase + ULITE_STATUS);
+ int stat = ioread32be(port->membase + ULITE_STATUS);
busy = ulite_receive(port, stat);
busy |= ulite_transmit(port, stat);
n++;
@@ -178,7 +178,7 @@ static unsigned int ulite_tx_empty(struct uart_port *port)
unsigned int ret;
spin_lock_irqsave(&port->lock, flags);
- ret = readb(port->membase + ULITE_STATUS);
+ ret = ioread32be(port->membase + ULITE_STATUS);
spin_unlock_irqrestore(&port->lock, flags);
return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
@@ -201,7 +201,7 @@ static void ulite_stop_tx(struct uart_port *port)
static void ulite_start_tx(struct uart_port *port)
{
- ulite_transmit(port, readb(port->membase + ULITE_STATUS));
+ ulite_transmit(port, ioread32be(port->membase + ULITE_STATUS));
}
static void ulite_stop_rx(struct uart_port *port)
@@ -230,17 +230,17 @@ static int ulite_startup(struct uart_port *port)
if (ret)
return ret;
- writeb(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
+ iowrite32be(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
port->membase + ULITE_CONTROL);
- writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
+ iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
return 0;
}
static void ulite_shutdown(struct uart_port *port)
{
- writeb(0, port->membase + ULITE_CONTROL);
- readb(port->membase + ULITE_CONTROL); /* dummy */
+ iowrite32be(0, port->membase + ULITE_CONTROL);
+ ioread32be(port->membase + ULITE_CONTROL); /* dummy */
free_irq(port->irq, port);
}
@@ -352,7 +352,7 @@ static void ulite_console_wait_tx(struct uart_port *port)
/* Spin waiting for TX fifo to have space available */
for (i = 0; i < 100000; i++) {
- val = readb(port->membase + ULITE_STATUS);
+ val = ioread32be(port->membase + ULITE_STATUS);
if ((val & ULITE_STATUS_TXFULL) == 0)
break;
cpu_relax();
@@ -362,7 +362,7 @@ static void ulite_console_wait_tx(struct uart_port *port)
static void ulite_console_putchar(struct uart_port *port, int ch)
{
ulite_console_wait_tx(port);
- writeb(ch, port->membase + ULITE_TX);
+ iowrite32be(ch, port->membase + ULITE_TX);
}
static void ulite_console_write(struct console *co, const char *s,
@@ -379,8 +379,8 @@ static void ulite_console_write(struct console *co, const char *s,
spin_lock_irqsave(&port->lock, flags);
/* save and disable interrupt */
- ier = readb(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
- writeb(0, port->membase + ULITE_CONTROL);
+ ier = ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_IE;
+ iowrite32be(0, port->membase + ULITE_CONTROL);
uart_console_write(port, s, count, ulite_console_putchar);
@@ -388,7 +388,7 @@ static void ulite_console_write(struct console *co, const char *s,
/* restore interrupt state */
if (ier)
- writeb(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
+ iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL);
if (locked)
spin_unlock_irqrestore(&port->lock, flags);
@@ -601,7 +601,7 @@ ulite_of_probe(struct of_device *op, const struct of_device_id *match)
id = of_get_property(op->node, "port-number", NULL);
- return ulite_assign(&op->dev, id ? *id : -1, res.start+3, irq);
+ return ulite_assign(&op->dev, id ? *id : -1, res.start, irq);
}
static int __devexit ulite_of_remove(struct of_device *op)
--
1.6.2.1
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
