Mikael Starvik ha scritto:
> Hi!
>
> Jesper is on vacation but I find this patch ok.
>
> Acked-by: Mikael Starvik<Starvik@xxxxxxxx>
Hi Mikael, Hi Jesper,
the merge window will be opened very soon. So, please remember
this patch.
I already fixed the atmel_serial driver (commit number
1b6331848b69d1ed165a6bdc75c4046d68767563)
Now, it's quite important to fix the Cris driver as well.
Cheers,
Claudio
CRIS RS485: Check SER_RS485_RTS_BEFORE_SEND before delaying.
Signed-off-by: Claudio Scordino <claudio@xxxxxxxxxxxxxxx>
Acked-by: Mikael Starvik <Starvik@xxxxxxxx>
---
drivers/serial/crisv10.c | 21 ++++++++++++++-------
1 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index c856905..a2237e7 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -1411,11 +1411,12 @@ e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r)
CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
#endif
- info->rs485.flags = r->flags;
- if (r->delay_rts_before_send >= 1000)
+ info->rs485 = *r;
+
+ /* Maximum delay before RTS equal to 1000 */
+ if (info->rs485.delay_rts_before_send >= 1000)
info->rs485.delay_rts_before_send = 1000;
- else
- info->rs485.delay_rts_before_send = r->delay_rts_before_send;
+
/* printk("rts: on send = %i, after = %i, enabled = %i",
info->rs485.rts_on_send,
info->rs485.rts_after_sent,
@@ -3234,9 +3235,9 @@ rs_write(struct tty_struct *tty,
e100_disable_rx(info);
e100_enable_rx_irq(info);
#endif
-
- if (info->rs485.delay_rts_before_send > 0)
- msleep(info->rs485.delay_rts_before_send);
+ if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) &&
+ (info->rs485.delay_rts_before_send > 0))
+ msleep(info->rs485.delay_rts_before_send);
}
#endif /* CONFIG_ETRAX_RS485 */
@@ -3694,6 +3695,11 @@ rs_ioctl(struct tty_struct *tty, struct file * file,
rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
rs485data.flags = 0;
+ if (rs485data.delay_rts_before_send != 0)
+ rs485data.flags |= SER_RS485_RTS_BEFORE_SEND;
+ else
+ rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND);
+
if (rs485ctrl.enabled)
rs485data.flags |= SER_RS485_ENABLED;
else
@@ -4527,6 +4533,7 @@ static int __init rs_init(void)
/* Set sane defaults */
info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
+ info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND);
info->rs485.delay_rts_before_send = 0;
info->rs485.flags &= ~(SER_RS485_ENABLED);
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
