Linux SCSI

• Thread Index

• Re: [PATCH] scsi: pm80xx: fix spelling mistake "to" -> "too"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next] scsi: ufs: fix spelling mistake "initilized" -> "initialized"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: scsi: ufs: remove pedrom.sousa@xxxxxxxxxxxx
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] megaraid_sas: fixup MSIx interrupt setup during resume
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 net-next 09/13] qed: FW 8.42.2.0 HSI changes
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5] qla2xxx: Fix unbound NVME response length
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH RESEND v4] iscsi: Perform connection failure entirely in kernel space
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH 12/12] lpfc: Copyright updates for 12.6.0.4 patches
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 11/12] lpfc: Update lpfc version to 12.6.0.4
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 10/12] lpfc: Change lpfc_lun_queue_depth attribute to writable
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 08/12] lpfc: Remove handler for obsolete ELS - Read Port Status (RPS)
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 09/12] lpfc: Clean up hba max_lun_queue_depth checks
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 07/12] lpfc: Fix coverity errors in fmdi attribute handling
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 06/12] lpfc: Fix compiler warning on frame size
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 05/12] lpfc: Fix release of hwq to clear the eq relationship
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 04/12] lpfc: Fix registration of ELS type support in fdmi
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 02/12] lpfc: Fix lpfc_io_buf resource leak in lpfc_get_scsi_buf_s4 error path
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 01/12] lpfc: Fix RQ buffer leakage when no IOCBs available
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 00/12] lpfc: Update lpfc to revision 12.6.0.4
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v2 net-next 05/13] qed: Use dmae to write to widebus registers in fw_funcs
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 net-next 00/13] qed*: Utilize FW 8.42.2.0
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v3 net-next 03/13] qed: FW 8.42.2.0 Queue Manager changes
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 13/13] qed: FW 8.42.2.0 debug features
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 04/13] qed: FW 8.42.2.0 Parser offsets modified
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 02/13] qed: FW 8.42.2.0 Expose new registers and change windows
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 05/13] qed: Use dmae to write to widebus registers in fw_funcs
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 11/13] qed: Debug feature: ilt and mdump
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 09/13] qed: FW 8.42.2.0 HSI changes
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 10/13] qed: FW 8.42.2.0 Add fw overlay feature
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 12/13] qed: rt init valid initialization changed
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 08/13] qed: FW 8.42.2.0 iscsi/fcoe changes
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 06/13] qed: FW 8.42.2.0 Additional ll2 type
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 07/13] qed: Add abstraction for different hsi values per chip
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 01/13] qed: FW 8.42.2.0 Internal ram offsets modifications
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v3 net-next 00/13] qed*: Utilize FW 8.42.2.0
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• Re: [PATCH] Add prctl support for controlling mem reclaim V4
  • From: Christian Brauner <christian.brauner@xxxxxxxxxx>
• Re: [PATCH v2 net-next 13/13] qed: FW 8.42.2.0 debug features
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 net-next 11/13] qed: Debug feature: ilt and mdump
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [RFC PATCH] qed: Debug feature: qed_dbg_ilt_get_dump_buf_size() can be static
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] sd: Fix REQ_OP_ZONE_REPORT completion handling
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• [PATCH] sd: Fix REQ_OP_ZONE_REPORT completion handling
  • From: Masato Suzuki <masato.suzuki@xxxxxxx>
• [PATCH RESEND] iscsi: Add support for asynchronous iSCSI session destruction
  • From: Gabriel Krisman Bertazi <krisman@xxxxxxxxxxxxx>
• Re: [PATCH v2 net-next 09/13] qed: FW 8.42.2.0 HSI changes
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 net-next 05/13] qed: Use dmae to write to widebus registers in fw_funcs
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 net-next 00/13] qed*: Utilize FW 8.42.2.0
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [GIT PULL] more SCSI fixes for 5.5-rc7
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] more SCSI fixes for 5.5-rc7
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH][next] scsi: megaraid_sas: fix indentation issue
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: mvsas: ensure loop counter phy_no does not wrap and cause an infinite loop
  • From: James Bottomley <jejb@xxxxxxxxxxxxx>
• [PATCH][next] scsi: megaraid_sas: fix indentation issue
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] scsi: mvsas: ensure loop counter phy_no does not wrap and cause an infinite loop
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• RE: [PATCH v2 net-next 00/13] qed*: Utilize FW 8.42.2.0
  • From: Michal Kalderon <mkalderon@xxxxxxxxxxx>
• Re: [PATCH v4 8/8] scsi: ufs: Select INITIAL adapt for HS Gear4
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4 6/8] scsi: ufs: Add dev ref clock gating wait time support
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4 1/8] scsi: ufs: Flush exception event before suspend
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH RESEND v4] iscsi: Perform connection failure entirely in kernel space
  • From: Gabriel Krisman Bertazi <krisman@xxxxxxxxxxxxx>
• [PATCH] scsi: isci: fix unneeded variable
  • From: Saurav Girepunje <saurav.girepunje@xxxxxxxxx>
• [PATCH RESEND v4] iscsi: Perform connection failure entirely in kernel space
  • From: Gabriel Krisman Bertazi <krisman@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] scsi: refactor sdev lun queue depth setting via sysfs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 2/3] scsi: add shost helper to set max queue depth on all of its devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 3/3] scsi: add shost attribute to set max queue depth on all devices on the shost
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 1/3] scsi: refactor sdev lun queue depth setting via sysfs
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v3 3/3] scsi: add shost attribute to set max queue depth on all devices on the shost
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v3 2/3] scsi: add shost helper to set max queue depth on all of its devices
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v3 0/3] scsi: add attribute to set lun queue depth on all luns on shost
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH] Add prctl support for controlling mem reclaim V4
  • From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
• Re: [PATCH] Add prctl support for controlling mem reclaim V4
  • From: Dave Chinner <david@xxxxxxxxxxxxx>
• RE: [PATCH 5/6] scsi: core: don't limit per-LUN queue depth for SSD when HBA needs
  • From: Sumanesh Samanta <sumanesh.samanta@xxxxxxxxxxxx>
• Re: [PATCH] scsi: pm80xx: fix spelling mistake "to" -> "too"
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next 03/14] qed: FW 8.42.2.0 Queue Manager changes
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 5/8] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 6/8] scsi: ufs: Add dev ref clock gating wait time support
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] scsi: ufs-qcom: Delay specific time before gate ref clk
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 8/8] scsi: ufs: Select INITIAL adapt for HS Gear4
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH] Add prctl support for controlling mem reclaim V4
  • From: Mike Christie <mchristi@xxxxxxxxxx>
• Re: [PATCH] scsi: don't panic host on invalid sgtable count
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH] scsi: don't panic host on invalid sgtable count
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] scsi: don't panic host on invalid sgtable count
  • From: Johannes Thumshirn <johannes.thumshirn@xxxxxxx>
• [PATCH v2 2/5] scsi: ufs-mediatek: support linkoff state during suspend
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 1/5] scsi: ufs-mediatek: ensure UniPro is not powered down before linkup
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 0/5] MediaTek UFS vendor implemenation part III and Auto-Hibern8 fix
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 5/5] scsi: ufs-mediatek: gate ref-clk during Auto-Hibern8
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 4/5] scsi: ufs: fix auto-hibern8 error detection
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v2 3/5] scsi: ufs: add ufshcd_is_auto_hibern8_enabled facility
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v5] qla2xxx: Fix unbound NVME response length
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 087/107] scsi: mptfusion: Fix double fetch bug in ioctl
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 086/107] scsi: storvsc: Correctly set number of hardware queues for IDE disk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 47/56] scsi: mptfusion: Fix double fetch bug in ioctl
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 29/32] scsi: mptfusion: Fix double fetch bug in ioctl
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [LSF/MM/BFP ATTEND] [LSF/MM/BFP TOPIC] Storage: Copy Offload
  • From: Nikos Tsironis <ntsironis@xxxxxxxxxxx>
• [PATCH AUTOSEL 4.9 18/18] scsi: mptfusion: Fix double fetch bug in ioctl
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 9/9] scsi: mptfusion: Fix double fetch bug in ioctl
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 5/6] scsi: core: don't limit per-LUN queue depth for SSD when HBA needs
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• Re: [PATCH] megaraid_sas: fixup MSIx interrupt setup during resume
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• Re: [PATCH] mpt3sas: don't change the dma coherent mask after allocations
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• Re: [PATCH v2 2/6] qla2xxx: Simplify the code for aborting SCSI commands
  • From: Daniel Wagner <dwagner@xxxxxxx>
• [PATCH v1 1/5] scsi: ufs-mediatek: ensure UniPro is not powered down before linkup
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 2/5] scsi: ufs-mediatek: support linkoff state during suspend
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 0/5] MediaTek UFS vendor implemenation part III and Auto-Hibern8 fix
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 5/5] scsi: ufs-mediatek: gate ref-clk during Auto-Hibern8
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 4/5] scsi: ufs: fix auto-hibern8 error detection
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 3/5] scsi: ufs: add ufshcd_is_auto_hibern8_enabled facility
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH 1/1] snic_trc_seq_next should increase position index
  • From: Vasily Averin <vvs@xxxxxxxxxxxxx>
• [PATCH 0/1] snic: seq_file .next functions should increase position index
  • From: Vasily Averin <vvs@xxxxxxxxxxxxx>
• [PATCH v5] qla2xxx: Fix unbound NVME response length
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH v2 5/6] qla2xxx: Convert MAKE_HANDLE() from a define into an inline function
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 2/6] qla2xxx: Simplify the code for aborting SCSI commands
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 3/3] scsi: add shost attribute to set max queue depth on all devices on the shost
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 2/3] scsi: add shost helper to set max queue depth on all of its devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 1/3] scsi: refactor sdev lun queue depth setting via sysfs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 5/6] scsi: core: don't limit per-LUN queue depth for SSD when HBA needs
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 5/6] scsi: core: don't limit per-LUN queue depth for SSD when HBA needs
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 5/6] scsi: core: don't limit per-LUN queue depth for SSD when HBA needs
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 5/6] scsi: core: don't limit per-LUN queue depth for SSD when HBA needs
  • From: Sumanesh Samanta <sumanesh.samanta@xxxxxxxxxxxx>
• Re: [PATCH v4] qla2xxx: Fix unbound NVME response length
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• RE: [EXT] [PATCH v4 6/8] scsi: ufs: Add dev ref clock gating wait time support
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] [PATCH v4 1/8] scsi: ufs: Flush exception event before suspend
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] [PATCH v3 1/8] scsi: ufs: Flush exception event before suspend
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH v4] qla2xxx: Fix unbound NVME response length
  • From: Arun Easi <aeasi@xxxxxxxxxxx>
• Re: [PATCH] scsi: add attribute to set lun queue depth on all luns on shost
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v2 3/3] scsi: add shost attribute to set max queue depth on all devices on the shost
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v2 2/3] scsi: add shost helper to set max queue depth on all of its devices
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v2 1/3] scsi: refactor sdev lun queue depth setting via sysfs
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v2 0/3] scsi: add attribute to set lun queue depth on all luns on shost
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v2 net-next 00/13] qed*: Utilize FW 8.42.2.0
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH net-next 01/14] qed: FW 8.42.2.0 Internal ram offsets modifications
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH net-next 14/14] qed: bump driver version
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH net-next 14/14] qed: bump driver version
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• [PATCH v2 net-next 13/13] qed: FW 8.42.2.0 debug features
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 10/13] qed: FW 8.42.2.0 Add fw overlay feature
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 06/13] qed: FW 8.42.2.0 Additional ll2 type
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 01/13] qed: FW 8.42.2.0 Internal ram offsets modifications
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 11/13] qed: Debug feature: ilt and mdump
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 09/13] qed: FW 8.42.2.0 HSI changes
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 12/13] qed: rt init valid initialization changed
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 08/13] qed: FW 8.42.2.0 iscsi/fcoe changes
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 07/13] qed: Add abstraction for different hsi values per chip
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 05/13] qed: Use dmae to write to widebus registers in fw_funcs
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 04/13] qed: FW 8.42.2.0 Parser offsets modified
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 03/13] qed: FW 8.42.2.0 Queue Manager changes
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 02/13] qed: FW 8.42.2.0 Expose new registers and change windows
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH v2 net-next 00/13] qed*: Utilize FW 8.42.2.0
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• Re: [PATCH v2 6/6] qla2xxx: Fix the endianness annotations for the port attribute max_frame_size member
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH v2 5/6] qla2xxx: Convert MAKE_HANDLE() from a define into an inline function
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH v2 4/6] qla2xxx: Fix sparse warnings triggered by the PCI state checking code
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH v2 3/6] qla2xxx: Suppress endianness complaints in qla2x00_configure_local_loop()
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH v2 2/6] qla2xxx: Simplify the code for aborting SCSI commands
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH] hisi_sas: Fix unreasonable exit processing of hisi_sas_v3_probe
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH net-next 14/14] qed: bump driver version
  • From: Michal Kalderon <mkalderon@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] qla2xxx: Check locking assumptions at runtime in qla2x00_abort_srb()
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH v4 2/8] scsi: ufs: set load before setting voltage in regulators
  • From: hongwus@xxxxxxxxxxxxxx
• [PATCH v4 8/8] scsi: ufs: Select INITIAL adapt for HS Gear4
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 7/8] scsi: ufs-qcom: Delay specific time before gate ref clk
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 6/8] scsi: ufs: Add dev ref clock gating wait time support
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 5/8] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 3/8] scsi: ufs: Remove the check before call setup clock notify vops
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 4/8] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 2/8] scsi: ufs: set load before setting voltage in regulators
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 1/8] scsi: ufs: Flush exception event before suspend
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v4 0/8] UFS driver general fixes bundle 4
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/8] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
  • From: hongwus@xxxxxxxxxxxxxx
• [PATCH] hisi_sas: Fix unreasonable exit processing of hisi_sas_v3_probe
  • From: Ye Bin <yebin10@xxxxxxxxxx>
• [PATCH v3 8/8] scsi: ufs: Select INITIAL adapt for HS Gear4
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v3 6/8] scsi: ufs: Add dev ref clock gating wait time support
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v3 7/8] scsi: ufs-qcom: Delay specific time before gate ref clk
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v3 5/8] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v3 4/8] scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v3 3/8] scsi: ufs: Remove the check before call setup clock notify vops
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v3 2/8] scsi: ufs: set load before setting voltage in regulators
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v3 1/8] scsi: ufs: Flush exception event before suspend
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• [PATCH v3 0/8] UFS driver general fixes bundle 4
  • From: Can Guo <cang@xxxxxxxxxxxxxx>
• Re: [PATCH] scsi: add attribute to set lun queue depth on all luns on shost
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 6/6] qla2xxx: Fix the endianness annotations for the port attribute max_frame_size member
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 5/6] qla2xxx: Convert MAKE_HANDLE() from a define into an inline function
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 3/6] qla2xxx: Suppress endianness complaints in qla2x00_configure_local_loop()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 4/6] qla2xxx: Fix sparse warnings triggered by the PCI state checking code
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 2/6] qla2xxx: Simplify the code for aborting SCSI commands
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 0/6] qla2xxx patches for kernel v5.6
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 1/6] qla2xxx: Check locking assumptions at runtime in qla2x00_abort_srb()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 4/4] ufs: Let the SCSI core allocate per-command UFS data
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 3/4] ufs: Simplify two tests
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 2/4] ufs: Introduce ufshcd_init_lrb()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 1/4] Introduce {init,exit}_cmd_priv()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 0/4] ufs: Let the SCSI core allocate per-command UFS data
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 5/6] scsi: core: don't limit per-LUN queue depth for SSD when HBA needs
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH -next] scsi: qla2xxx: use PTR_ERR_OR_ZERO() to simplify code
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: Delete extra blank line
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4] qla2xxx: Fix unbound NVME response length
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH] scsi: pm80xx: fix spelling mistake "to" -> "too"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• RE: [PATCH v4] qla2xxx: Fix unbound NVME response length
  • From: Arun Easi <aeasi@xxxxxxxxxxx>
• RE: [PATCH v4] qla2xxx: Fix unbound NVME response length
  • From: "Elliott, Robert (Servers)" <elliott@xxxxxxx>
• Re: [PATCH v4] qla2xxx: Fix unbound NVME response length
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v4] qla2xxx: Fix unbound NVME response length
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH net-next 13/14] qed: FW 8.42.2.0 debug features
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH net-next 13/14] qed: FW 8.42.2.0 debug features
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH net-next 14/14] qed: bump driver version
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH net-next 13/14] qed: FW 8.42.2.0 debug features
  • From: Michal Kalderon <mkalderon@xxxxxxxxxxx>
• RE: [EXT] Re: [PATCH net-next 14/14] qed: bump driver version
  • From: Michal Kalderon <mkalderon@xxxxxxxxxxx>
• Re: [PATCH net-next 13/14] qed: FW 8.42.2.0 debug features
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [PATCH net-next 14/14] qed: bump driver version
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• RE: [PATCH net-next 13/14] qed: FW 8.42.2.0 debug features
  • From: Michal Kalderon <mkalderon@xxxxxxxxxxx>
• RE: [PATCH net-next 01/14] qed: FW 8.42.2.0 Internal ram offsets modifications
  • From: Michal Kalderon <mkalderon@xxxxxxxxxxx>
• Re: [PATCH net-next 13/14] qed: FW 8.42.2.0 debug features
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH net-next 01/14] qed: FW 8.42.2.0 Internal ram offsets modifications
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH net-next 01/14] qed: FW 8.42.2.0 Internal ram offsets modifications
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 04/14] qed: FW 8.42.2.0 Parser offsets modified
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 13/14] qed: FW 8.42.2.0 debug features
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 08/14] qed: FW 8.42.2.0 iscsi/fcoe changes
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 14/14] qed: bump driver version
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 11/14] qed: Debug feature: ilt and mdump
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 10/14] qed: FW 8.42.2.0 Add fw overlay feature
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 12/14] qed: rt init valid initialization changed
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 05/14] qed: Use dmae to write to widebus registers in fw_funcs
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 09/14] qed: FW 8.42.2.0 HSI changes
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 07/14] qed: Add abstraction for different hsi values per chip
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 06/14] qed: FW 8.42.2.0 Additional ll2 type
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 03/14] qed: FW 8.42.2.0 Queue Manager changes
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 02/14] qed: FW 8.42.2.0 Expose new registers and change windows
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• [PATCH net-next 00/14] qed*: Utilize FW 8.42.2.0
  • From: Michal Kalderon <michal.kalderon@xxxxxxxxxxx>
• Re: [PATCH V2 05/13] pm80xx : Support for char device.
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH] MAINTAINERS: scsi: ufs: remove pedrom.sousa@xxxxxxxxxxxx
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH -next] scsi: qla2xxx: use PTR_ERR_OR_ZERO() to simplify code
  • From: Chen Zhou <chenzhou10@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH v4 6/8] scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] [PATCH][next] scsi: ufs: fix spelling mistake "initilized" -> "initialized"
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [PATCH] scsi: Delete extra blank line
  • From: Ye Bin <yebin10@xxxxxxxxxx>
• [PATCH][next] scsi: ufs: fix spelling mistake "initilized" -> "initialized"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH V2 10/13] pm80xx : IOCTL functionality for SGPIO.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• RE: [PATCH V2 05/13] pm80xx : Support for char device.
  • From: <Deepak.Ukey@xxxxxxxxxxxxx>
• [Bug 206261] LEDs are off for AHCI connected drives on Cisco C125 server
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v4 6/8] scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4 5/8] scsi: ufs: Inline two functions into their callers
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi: add attribute to set lun queue depth on all luns on shost
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v6 2/9] block: Add encryption context to struct bio
  • From: Satya Tangirala <satyat@xxxxxxxxxx>
• [PATCH v4] qla2xxx: Fix unbound NVME response length
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH 1/1] qla2xxx: Fix unbound NVME response length
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH 1/1] qla2xxx: Fix unbound NVME response length
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH] scsi: qla1280: Fix a use of QLA_64BIT_PTR
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qla1280: Fix a use of QLA_64BIT_PTR
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH] scsi: qla1280: Fix a use of QLA_64BIT_PTR
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH] scsi: qla1280: Fix a use of QLA_64BIT_PTR
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH V2 05/13] pm80xx : Support for char device.
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] mpt3sas: don't change the dma coherent mask after allocations
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• Re: [PATCH V2 06/13] pm80xx : sysfs attribute for number of phys.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• [PATCH] scsi: Remove redundant assignment about request_queue->queuedata
  • From: Ye Bin <yebin10@xxxxxxxxxx>
• [Bug 206261] New: LEDs are off for AHCI connected drives on Cisco C125 server
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• RE: [PATCH V2 05/13] pm80xx : Support for char device.
  • From: <Deepak.Ukey@xxxxxxxxxxxxx>
• Re: [PATCH] mpt3sas: don't change the dma coherent mask after allocations
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] fnic: do not queue commands during fwreset
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH RESEND 0/2] Fixing libfc memory leaks
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] megaraid_sas: fixup MSIx interrupt setup during resume
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 5/6] scsi: core: don't limit per-LUN queue depth for SSD when HBA needs
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/7] hisi_sas: Misc patches
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V2 05/13] pm80xx : Support for char device.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1 0/3] scsi: ufs-mediatek: add MediaTek vendor implementation part II
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: sd: provide a new module parameter to set whether SCSI disks support WRITE_SAME_16 by default
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qla1280: Make checking for 64bit support consistent
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• RE: [PATCH 2/6] scsi: remove .for_blk_mq
  • From: "Elliott, Robert (Servers)" <elliott@xxxxxxx>
• Re: [PATCH v1 3/3] scsi: ufs-mediatek: enable low-power mode for hibern8 state
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] scsi: ufs: export some functions for vendor usage
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 6/8] scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 5/8] scsi: ufs: Inline two functions into their callers
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/8] scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/8] scsi: ufs: Split ufshcd_probe_hba() based on its called flow
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• [PATCH] scsi: qla1280: Fix a use of QLA_64BIT_PTR
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH v1 1/1] scsi: ufs: Add command logging infrastructure
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• RE: [PATCH resend] scsi: smartpqi: add missed free_irq in suspend
  • From: <Don.Brace@xxxxxxxxxxxxx>
• RE: [EXT] Re: [PATCH v3 0/8] Use UFS device indicated maximum LU number
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• [PATCH v4 8/8] scsi: ufs: Use UFS device indicated maximum LU number
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v4 7/8] scsi: ufs: Add max_lu_supported in struct ufs_dev_info
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v4 6/8] scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v4 5/8] scsi: ufs: Inline two functions into their callers
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v4 4/8] scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v4 3/8] scsi: ufs: Split ufshcd_probe_hba() based on its called flow
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v4 2/8] scsi: ufs: Delete struct ufs_dev_desc
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v4 1/8] scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v4 0/8] Use UFS device indicated maximum LU number
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH 6/7] scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 7/7] scsi: hisi_sas: Use reply map for v2 hw
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 5/7] scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 4/7] scsi: hisi_sas: Modify the file permissions of trigger_dump to write only
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 0/7] hisi_sas: Misc patches
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 3/7] scsi: hisi_sas: Replace magic number when handle channel interrupt
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 1/7] scsi: hisi_sas: use threaded irq to process CQ interrupts
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 2/7] scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 2/6] scsi: remove .for_blk_mq
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH V2 01/13] pm80xx : Increase request sg length.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: sd: provide a new module parameter to set whether SCSI disks support WRITE_SAME_16 by default
  • From: AlexChen <alex.chen@xxxxxxxxxx>
• Re: [PATCH] scsi: mptfusion: Fix double fetch bug in ioctl
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• RE: [PATCH V2 06/13] pm80xx : sysfs attribute for number of phys.
  • From: <Deepak.Ukey@xxxxxxxxxxxxx>
• RE: [PATCH V2 01/13] pm80xx : Increase request sg length.
  • From: <Deepak.Ukey@xxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v3 0/8] Use UFS device indicated maximum LU number
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• [Question] How can I get source code of mpt3sas-24.125.01.00
  • From: Weiping Zhang <zwp10758@xxxxxxxxx>
• RE: [EXT] Re: [PATCH v3 4/8] scsi: ufs: move ufshcd_get_max_pwr_mode() to ufs_init_params()
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH v3 0/8] Use UFS device indicated maximum LU number
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH 5/6] scsi: core: don't limit per-LUN queue depth for SSD when HBA needs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 4/6] block: freeze queue for updating QUEUE_FLAG_NONROT
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 3/6] scsi: sd: register request queue after sd_revalidate_disk is done
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/6] scsi: remove .for_blk_mq
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/6] scsi: mpt3sas: don't use .device_busy in device reset routine
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: sd: provide a new module parameter to set whether SCSI disks support WRITE_SAME_16 by default
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/4] ufs: Introduce ufshcd_init_lrb()
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v1 3/3] scsi: ufs-mediatek: enable low-power mode for hibern8 state
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• [PATCH] scsi: sd: provide a new module parameter to set whether SCSI disks support WRITE_SAME_16 by default
  • From: AlexChen <alex.chen@xxxxxxxxxx>
• Re: [PATCH v1 2/3] scsi: ufs: export some functions for vendor usage
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v1 1/3] scsi: ufs-mediatek: add dbg_register_dump implementation
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v3 4/8] scsi: ufs: move ufshcd_get_max_pwr_mode() to ufs_init_params()
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v3 2/8] scsi: ufs: Delete struct ufs_dev_desc
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v3 1/8] scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH 6/6] scsi: megaraid: set flag of no_device_queue_for_ssd
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 5/6] scsi: core: don't limit per-LUN queue depth for SSD when HBA needs
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 4/6] block: freeze queue for updating QUEUE_FLAG_NONROT
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 3/6] scsi: sd: register request queue after sd_revalidate_disk is done
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 2/6] scsi: remove .for_blk_mq
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 1/6] scsi: mpt3sas: don't use .device_busy in device reset routine
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH 0/6] scsi: support bypass device busy check for some high end HBA with SSD
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v3 0/8] Use UFS device indicated maximum LU number
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v3 8/8] scsi: ufs: Use UFS device indicated maximum LU number
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v3 7/8] scsi: ufs: Add max_lu_supported in struct ufs_dev_info
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v3 5/8] scsi: ufs: Inline two functions into their callers
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v3 4/8] scsi: ufs: move ufshcd_get_max_pwr_mode() to ufs_init_params()
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v3 3/8] scsi: ufs: Split ufshcd_probe_hba() based on its called flow
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v3 2/8] scsi: ufs: Delete struct ufs_dev_desc
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v3 1/8] scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• Re: [PATCH v3 1/8] scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
  • From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
• [Bug 206253] New: mpt3sas driver crash under heavy load
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH v3 8/8] scsi: ufs: Use UFS device indicated maximum LU number
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v3 7/8] scsi: ufs: Add max_lu_supported in struct ufs_dev_info
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v3 6/8] scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v3 5/8] scsi: ufs: Inline two functions into their callers
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v3 4/8] scsi: ufs: move ufshcd_get_max_pwr_mode() to ufs_init_params()
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v3 3/8] scsi: ufs: Split ufshcd_probe_hba() based on its called flow
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v3 2/8] scsi: ufs: Delete struct ufs_dev_desc
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v3 1/8] scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v3 0/8] Use UFS device indicated maximum LU number
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [GIT PULL] more SCSI fixes for 5.5-rc6
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] more SCSI fixes for 5.5-rc6
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 6/9] scsi: ufs: Add inline encryption support to UFS
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v6 2/9] block: Add encryption context to struct bio
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v6 6/9] scsi: ufs: Add inline encryption support to UFS
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [PATCH] iscsi: Add support for asynchronous iSCSI session destruction
  • From: Gabriel Krisman Bertazi <krisman@xxxxxxxxxxxxx>
• Re: [PATCH v3] qla2xxx: Fix unbound NVME response length
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• [PATCH v3] qla2xxx: Fix unbound NVME response length
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH v2 3/9] scsi: ufs: Split ufshcd_probe_hba() based on its called flow
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH v2] qla2xxx: Fix unbound NVME response length
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH v2 1/9] scsi: ufs: goto with returned value while failed to add WL
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/9] scsi: ufs: Delete struct ufs_dev_desc
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH V2 01/13] pm80xx : Increase request sg length.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• RE: [PATCH V2 01/13] pm80xx : Increase request sg length.
  • From: <Deepak.Ukey@xxxxxxxxxxxxx>
• [PATCH 2/2] drivers: scsi: qedf: qedf_main: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• [PATCH 1/2] drivers: scsi: fcoe: fcoe_ctlr: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• Re: [PATCH V2 07/13] pm80xx : IOCTL functionality to get phy status.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 11/13] pm80xx : sysfs attribute for non fatal dump.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 06/13] pm80xx : sysfs attribute for number of phys.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 05/13] pm80xx : Support for char device.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 01/13] pm80xx : Increase request sg length.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 6/9] scsi: ufs: Add inline encryption support to UFS
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v6 5/9] scsi: ufs: UFS crypto API
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH] mpt3sas: don't change the dma coherent mask after allocations
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v3 3/3] drivers: target: tcm_fc: tfc_sess: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• [PATCH v3 2/3] drivers: target: target_core_tpg: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• [PATCH v3 1/3] drivers: target: target_core_device: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• RE: [EXT] Re: [PATCH v2 5/9] scsi: ufs: Delete two unnecessary functions
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH v2 7/9] scsi: ufs: Add max_lu_supported in struct ufs_dev_info
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH v2 6/9] scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH v2 1/9] scsi: ufs: goto with returned value while failed to add WL
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH v2 2/9] scsi: ufs: Delete struct ufs_dev_desc
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [linux-next/mainline][bisected 3acac06][ppc] Oops when unloading mpt3sas driver
  • From: Abdul Haleem <abdhalee@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 4/9] scsi: ufs: UFS driver v2.1 spec crypto additions
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH] scsi: qla1280: Make checking for 64bit support consistent
  • From: Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>
• Re: [PATCH 09/11] megaraid_sas: switch fusion adapters to MQ
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• RE: [PATCH v2 10/11] megaraid_sas: Use Block layer API to check SCSI device in-flight IO requests
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• Re: [PATCH 09/11] megaraid_sas: switch fusion adapters to MQ
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• Re: [PATCH v6 1/9] block: Keyslot Manager for Inline Encryption
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v6 0/9] Inline Encryption Support
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v6 2/9] block: Add encryption context to struct bio
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] scsi: ufs: set device as default active power mode during initialization only
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH V2 13/13] pm80xx : IOCTL functionality for TWI device.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 12/13] pm80xx : Introduce read and write length for IOCTL payload structure.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 11/13] pm80xx : sysfs attribute for non fatal dump.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 10/13] pm80xx : IOCTL functionality for SGPIO.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 09/13] pm80xx : IOCTL functionality for GPIO.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 08/13] pm80xx : IOCTL functionality to get phy error.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 07/13] pm80xx : IOCTL functionality to get phy status.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 06/13] pm80xx : sysfs attribute for number of phys.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 05/13] pm80xx : Support for char device.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 04/13] pm80xx : Cleanup initialization loading fail path.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 03/13] pm80xx : Free the tag when mpi_set_phy_profile_resp is received.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 02/13] pm80xx : Deal with kexec reboots.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 01/13] pm80xx : Increase request sg length.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• [PATCH V2 00/13] pm80xx : Updates for the driver version 0.1.39.
  • From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
• Re: [PATCH v2 7/9] scsi: ufs: Add max_lu_supported in struct ufs_dev_info
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 6/9] scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 5/9] scsi: ufs: Delete two unnecessary functions
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 1/9] scsi: ufs: goto with returned value while failed to add WL
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/9] scsi: ufs: Delete struct ufs_dev_desc
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v1 2/3] scsi: ufs: export some functions for vendor usage
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 3/3] scsi: ufs-mediatek: enable low-power mode for hibern8 state
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 0/3] scsi: ufs-mediatek: add MediaTek vendor implementation part II
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v1 1/3] scsi: ufs-mediatek: add dbg_register_dump implementation
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v1 1/1] scsi: ufs: Add command logging infrastructure
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qla1280: Fix dma firmware download, if dma address is 64bit
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH 4.19 50/84] scsi: sd: enable compat ioctls for sed-opal
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.14 44/71] scsi: sd: enable compat ioctls for sed-opal
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.4 127/203] scsi: sd: enable compat ioctls for sed-opal
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] scsi: ufs: Add command logging infrastructure
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix unbound NVME response length
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2 9/9] scsi: ufs: Use UFS device indicated maximum LU number
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 8/9] scsi: ufs: Initialize max_lu_supported
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 7/9] scsi: ufs: Add max_lu_supported in struct ufs_dev_info
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 6/9] scsi: ufs: Delete is_init_prefetch from struct ufs_hba
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 5/9] scsi: ufs: Delete two unnecessary functions
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 4/9] scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufs_init_params()
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 3/9] scsi: ufs: Split ufshcd_probe_hba() based on its called flow
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 2/9] scsi: ufs: Delete struct ufs_dev_desc
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 1/9] scsi: ufs: goto with returned value while failed to add WL
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 0/9] Use UFS device indicated maximum LU number
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH AUTOSEL 5.4 156/205] scsi: qla4xxx: fix double free bug
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 157/205] scsi: bnx2i: fix potential use after free
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 158/205] scsi: target: core: Fix a pr_debug() argument
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 177/205] scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 178/205] scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 166/205] scsi: scsi_transport_sas: Fix memory leak when removing devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 204/205] scsi: mpt3sas: Fix double free in attach error handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 200/205] scsi: ufs: Give an unique ID to each ufs-bsg
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 282/671] scsi: qla2xxx: Unregister chrdev if module initialization fails
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 289/671] scsi: target/core: Fix a race condition in the LUN lookup code
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 316/671] scsi: qla2xxx: Fix a format specifier
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 318/671] scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 463/671] scsi: libfc: fix null pointer dereference on a null lport
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 538/671] scsi: fnic: fix msix interrupt allocation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 159/371] scsi: target/core: Fix a race condition in the LUN lookup code
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 174/371] scsi: qla2xxx: Fix a format specifier
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 175/371] scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 248/371] scsi: libfc: fix null pointer dereference on a null lport
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 290/371] scsi: fnic: fix msix interrupt allocation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 092/251] scsi: megaraid_sas: reduce module load time
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 113/251] scsi: qla2xxx: Unregister chrdev if module initialization fails
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 168/251] scsi: libfc: fix null pointer dereference on a null lport
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 231/251] scsi: esas2r: unlock on error in esas2r_nvram_read_direct()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 233/251] scsi: core: scsi_trace: Use get_unaligned_be*()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 243/251] scsi: qla4xxx: fix double free bug
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 245/251] scsi: target: core: Fix a pr_debug() argument
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 056/174] scsi: megaraid_sas: reduce module load time
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [linux-next/mainline][bisected 3acac06][ppc] Oops when unloading mpt3sas driver
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH] lpfc: Gather lpfc debug logs using tracefs ringbuffer
  • From: Rajan Shanmugavelu <rajan.shanmugavelu@xxxxxxxxxx>
• Gather lpfc debug logs in kernel tracefs ringbuffer
  • From: Rajan Shanmugavelu <rajan.shanmugavelu@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 110/174] scsi: libfc: fix null pointer dereference on a null lport
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 158/174] scsi: esas2r: unlock on error in esas2r_nvram_read_direct()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 168/174] scsi: qla4xxx: fix double free bug
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 170/174] scsi: target: core: Fix a pr_debug() argument
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH AUTOSEL 4.4 169/174] scsi: bnx2i: fix potential use after free
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 09/11] megaraid_sas: switch fusion adapters to MQ
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH AUTOSEL 4.4 073/174] scsi: qla2xxx: Unregister chrdev if module initialization fails
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 244/251] scsi: bnx2i: fix potential use after free
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 357/371] scsi: qla4xxx: fix double free bug
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 358/371] scsi: bnx2i: fix potential use after free
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 359/371] scsi: target: core: Fix a pr_debug() argument
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 366/371] scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 365/371] scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 342/371] scsi: core: scsi_trace: Use get_unaligned_be*()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 339/371] scsi: esas2r: unlock on error in esas2r_nvram_read_direct()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 158/371] scsi: qla2xxx: Unregister chrdev if module initialization fails
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 132/371] scsi: megaraid_sas: reduce module load time
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 626/671] scsi: esas2r: unlock on error in esas2r_nvram_read_direct()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 632/671] scsi: core: scsi_trace: Use get_unaligned_be*()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 653/671] scsi: bnx2i: fix potential use after free
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 661/671] scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 662/671] scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 654/671] scsi: target: core: Fix a pr_debug() argument
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 652/671] scsi: qla4xxx: fix double free bug
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 317/671] scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 239/671] scsi: megaraid_sas: reduce module load time
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 136/205] scsi: hisi_sas: Return directly if init hardware failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 122/205] scsi: lpfc: Fix a kernel warning triggered by lpfc_get_sgl_per_hdwq()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 095/205] scsi: core: scsi_trace: Use get_unaligned_be*()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 089/205] scsi: ufs: delete redundant function ufshcd_def_desc_sizes()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 063/205] scsi: hisi_sas: Set the BIST init value before enabling BIST
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 062/205] scsi: hisi_sas: Don't create debugfs dump folder twice
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 061/205] scsi: esas2r: unlock on error in esas2r_nvram_read_direct()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 006/205] scsi: lpfc: Fix list corruption detected in lpfc_put_sgl_per_hdwq
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 005/205] scsi: lpfc: Fix hdwq sgl locks and irq handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 09/11] megaraid_sas: switch fusion adapters to MQ
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 10/11] megaraid_sas: Use Block layer API to check SCSI device in-flight IO requests
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH 0/3] cleanup patches for unused variables
  • From: yu kuai <yukuai3@xxxxxxxxxx>
• [PATCH 1/3] scsi: aic7xxx: remove set but not used variable 'tinfo'
  • From: yu kuai <yukuai3@xxxxxxxxxx>
• [PATCH 3/3] scsi: aic7xxx: remove set but not used variable 'targ'
  • From: yu kuai <yukuai3@xxxxxxxxxx>
• [PATCH 2/3] scsi: aic7xxx: remove set but not used variable 'ahc'
  • From: yu kuai <yukuai3@xxxxxxxxxx>
• Re: [PATCH] scsi: qla1280: Fix dma firmware download, if dma address is 64bit
  • From: Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>
• [LSF/MM/BPF ATTEND][LSF/MM/BPF TOPIC] Storage: shared host-wide tags for legacy SCSI drivers
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] fnic: do not queue commands during fwreset
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [linux-next/mainline][bisected 3acac06][ppc] Oops when unloading mpt3sas driver
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Trace seen on target during iSER login
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 00/11] megaraid_sas: driver updates to 07.713.01.00-rc1
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qla1280: Fix dma firmware download, if dma address is 64bit
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: mptfusion: Fix double fetch bug in ioctl
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] fnic: fix invalid stack access
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [Patch v2] scsi: storvsc: Correctly set number of hardware queues for IDE disk
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/3] drivers base: transport component error propagation
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v4] iscsi: Perform connection failure entirely in kernel space
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH RESEND] iscsi: Don't destroy session if there are outstanding connections
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 0/2] scsi: ufs: pass device information to apply_dev_quirks
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: BusLogic: use %lX for unsigned long rather than %X
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: Trace seen on target during iSER login
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1 0/3] scsi: ufs: fix error history and complete device reset history
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• REMINDER: LSF/MM/BPF: 2020: Call for Proposals
  • From: Josef Bacik <josef@xxxxxxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix unbound NVME response length
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH] qla2xxx: Fix unbound NVME response length
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• [PATCH v2] qla2xxx: Fix unbound NVME response length
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix unbound NVME response length
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] qla2xxx: Fix unbound NVME response length
  • From: Himanshu Madhani <hmadhani@xxxxxxxxxxx>
• Re: [PATCH v6 2/9] block: Add encryption context to struct bio
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v6 3/9] block: blk-crypto for Inline Encryption
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v6 5/9] scsi: ufs: UFS crypto API
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v6 7/9] fscrypt: add inline encryption support
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.5-rc6
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH RESEND] iscsi: Don't destroy session if there are outstanding connections
  • From: Lee Duncan <LDuncan@xxxxxxxx>
• [GIT PULL] SCSI fixes for 5.5-rc6
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] scsi: qla1280: Fix dma firmware download, if dma address is 64bit
  • From: Thomas Bogendoerfer <tbogendoerfer@xxxxxxx>
• Re: [PATCH v1] driver core: Use list_del_init to replace list_del at device_links_purge()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] driver core: Use list_del_init to replace list_del at device_links_purge()
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v1] driver core: Use list_del_init to replace list_del at device_links_purge()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] drivers base: transport component error propagation
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] drivers: base: Propagate errors through the transport component
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] drivers: base: Support atomic version of attribute_container_device_trigger
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH RESEND 2/2] scsi: libfc: drop extra rport reference in fc_rport_create()
  • From: Igor Druzhinin <igor.druzhinin@xxxxxxxxxx>
• [PATCH RESEND 0/2] Fixing libfc memory leaks
  • From: Igor Druzhinin <igor.druzhinin@xxxxxxxxxx>
• [PATCH RESEND 1/2] scsi: libfc: free response frame from GPN_ID
  • From: Igor Druzhinin <igor.druzhinin@xxxxxxxxxx>
• Re: [PATCH 09/11] megaraid_sas: switch fusion adapters to MQ
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH] scsi: mptfusion: Fix double fetch bug in ioctl
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v2 11/11] megaraid_sas: Update driver version to 07.713.01.00-rc1
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 10/11] megaraid_sas: Use Block layer API to check SCSI device in-flight IO requests
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 09/11] megaraid_sas: Limit the number of retries for the IOCTLs causing firmware fault
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 08/11] megaraid_sas: Do not initiate OCR if controller is not in ready state
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 07/11] megaraid_sas: Re-Define enum DCMD_RETURN_STATUS
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 06/11] megaraid_sas: Do not set HBA Operational if FW is not in operational state
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 05/11] megaraid_sas: Do not kill HBA if JBOD Seqence map or RAID map is disabled
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 04/11] megaraid_sas: Do not kill host bus adapter, if adapter is already dead
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 03/11] megaraid_sas: Update optimal queue depth for SAS and NVMe devices
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 02/11] megaraid_sas: Set no_write_same only for Virtual Disk
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 01/11] megaraid_sas: Reset adapter if FW is not in READY state after device resume
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• [PATCH v2 00/11] megaraid_sas: driver updates to 07.713.01.00-rc1
  • From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
• Re: [PATCH v6 27/37] sg: add sg v4 interface support
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: How to reset HBA when using libsas/mvsas
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: Roman Bolshakov <r.bolshakov@xxxxxxxxx>
• Re: [PATCH v6 07/37] sg: move header to uapi section
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 09/11] megaraid_sas: switch fusion adapters to MQ
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [linux-next/mainline][bisected 3acac06][ppc] Oops when unloading mpt3sas driver
  • From: Abdul Haleem <abdhalee@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• RE: [PATCH] scsi: storvsc: Correctly set number of hardware queues for IDE disk
  • From: Long Li <longli@xxxxxxxxxxxxx>
• [Patch v2] scsi: storvsc: Correctly set number of hardware queues for IDE disk
  • From: longli@xxxxxxxxxxxxxxxxx
• Re: How to reset HBA when using libsas/mvsas
  • From: Dāvis Mosāns <davispuh@xxxxxxxxx>
• Re: [PATCH RESEND] iscsi: Don't destroy session if there are outstanding connections
  • From: Gabriel Krisman Bertazi <krisman@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] scsi: ufs: add device reset history for vendor implementations
  • From: asutoshd@xxxxxxxxxxxxxx
• Re: [PATCH 3/3] scsi: ufs: use UFS device indicated maximum LU number
  • From: asutoshd@xxxxxxxxxxxxxx
• Re: [PATCH 2/3] scsi: ufs: initialize max_lu_supported while booting
  • From: asutoshd@xxxxxxxxxxxxxx
• Re: [PATCH 1/3] scsi: ufs: add max_lu_supported in struct ufs_dev_info
  • From: asutoshd@xxxxxxxxxxxxxx
• Re: [PATCH 09/11] megaraid_sas: switch fusion adapters to MQ
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] scsi: BusLogic: use %lX for unsigned long rather than %X
  • From: Khalid Aziz <khalid@xxxxxxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• [PATCH] megaraid_sas: fixup MSIx interrupt setup during resume
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] scsi: csiostor: simplify macro CSIO_VALID_WWN
  • From: Chen Zhou <chenzhou10@xxxxxxxxxx>
• Re: [PATCH v6 31/37] sg: add sg_iosubmit_v3 and sg_ioreceive_v3 ioctls
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: Failed to disable WCE for a SATA disk
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [EXT] [PATCH v1 3/3] scsi: ufs: remove "errors" word in ufshcd_print_err_hist()
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [EXT] [PATCH v1 2/3] scsi: ufs: add device reset history for vendor implementations
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: Daniel Wagner <dwagner@xxxxxxx>
• RE: [EXT] [PATCH v1 1/3] scsi: ufs: fix empty check of error history
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• Re: How to reset HBA when using libsas/mvsas
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [EXT] [PATCH v1 1/3] scsi: ufs: fix empty check of error history
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH 06/12] pm80xx : sysfs attribute for number of phys.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxxxxxxxx>
• RE: [EXT] [PATCH v1 1/3] scsi: ufs: fix empty check of error history
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [PATCH 06/12] pm80xx : sysfs attribute for number of phys.
  • From: <Deepak.Ukey@xxxxxxxxxxxxx>
• Re: [PATCH v6 27/37] sg: add sg v4 interface support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 07/37] sg: move header to uapi section
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: Failed to disable WCE for a SATA disk
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH v6 31/37] sg: add sg_iosubmit_v3 and sg_ioreceive_v3 ioctls
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v6 35/37] sg: first debugfs support
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 37/37] sg: bump version to 4.0.08
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 36/37] sg: warn v3 write system call users
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 34/37] sg: protect multiple receivers
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 33/37] sg: move procfs objects to avoid forward decls
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 30/37] sg: expand sg_comm_wr_t
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 32/37] sg: add some __must_hold macros
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 31/37] sg: add sg_iosubmit_v3 and sg_ioreceive_v3 ioctls
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 25/37] sg: replace rq array with lists
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 28/37] sg: rework debug info
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 29/37] sg: add 8 byte SCSI LUN to sg_scsi_id
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 27/37] sg: add sg v4 interface support
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 26/37] sg: sense buffer rework
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 24/37] sg: xarray for reqs in fd
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 23/37] sg: xarray for fds in device
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 22/37] sg: printk change %p to %pK
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 21/37] sg: sg_fill_request_element
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 20/37] sg: sg_find_srp_by_id
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 19/37] sg: introduce request state machine
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 18/37] sg: rework scatter gather handling
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 17/37] sg: replace sg_allow_access
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 16/37] sg: rework sg_mmap
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 15/37] sg: rework sg_vma_fault
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 14/37] sg: sg_common_write add structure for arguments
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 13/37] sg: split sg_read
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 12/37] sg: ioctl handling
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 10/37] sg: improve naming
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 11/37] sg: change rwlock to spinlock
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 09/37] sg: sg_allow_if_err_recovery and renames
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 07/37] sg: move header to uapi section
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 08/37] sg: speed sg_poll and sg_get_num_waiting
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 05/37] sg: bitops in sg_device
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 06/37] sg: make open count an atomic
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 03/37] sg: sg_log and is_enabled
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 04/37] sg: rework sg_poll(), minor changes
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 02/37] sg: remove typedefs, type+formatting cleanup
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 00/37] sg: add v4 interface
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v6 01/37] sg: move functions around
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Gabriel C <nix.or.die@xxxxxxxxx>
• [PATCH] qla2xxx: Fix a NULL pointer dereference in an error path
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Gabriel C <nix.or.die@xxxxxxxxx>
• RE: [PATCH] scsi: storvsc: Correctly set number of hardware queues for IDE disk
  • From: Michael Kelley <mikelley@xxxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Gabriel C <nix.or.die@xxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Gabriel C <nix.or.die@xxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Gabriel C <nix.or.die@xxxxxxxxx>
• RE: [EXT] Re: [PATCH 2/3] scsi: ufs: initialize max_lu_supported while booting
  • From: "Bean Huo (beanhuo)" <beanhuo@xxxxxxxxxx>
• RE: [PATCH 2/3] scsi: ufs: initialize max_lu_supported while booting
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• How to reset HBA when using libsas/mvsas
  • From: Dāvis Mosāns <davispuh@xxxxxxxxx>
• Re: [PATCH 3/3] scsi: ufs: use UFS device indicated maximum LU number
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/3] scsi: ufs: add max_lu_supported in struct ufs_dev_info
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/3] scsi: ufs: initialize max_lu_supported while booting
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] hwmon: Driver for temperature sensors on SATA drives
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] scsi: storvsc: Correctly set number of hardware queues for IDE disk
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH] scsi: storvsc: Correctly set number of hardware queues for IDE disk
  • From: longli@xxxxxxxxxxxxxxxxx
• Re: [PATCH 3/4] ufs: Simplify two tests
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• Re: [PATCH v1 0/3] scsi: ufs: fix error history and complete device reset history
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v3 0/2] scsi: ufs: pass device information to apply_dev_quirks
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v3 1/2] scsi: ufs: pass device information to apply_dev_quirks
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH v3 2/2] scsi: ufs-mediatek: add apply_dev_quirks variant operation
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• [PATCH 2/3] scsi: ufs: initialize max_lu_supported while booting
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH 3/3] scsi: ufs: use UFS device indicated maximum LU number
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH 1/3] scsi: ufs: add max_lu_supported in struct ufs_dev_info
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v1 0/3] use UFS device indicated maximum LU number
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH 3/4] ufs: Simplify two tests
  • From: asutoshd@xxxxxxxxxxxxxx
• [PATCH v2 3/3] drivers: target: tcm_fc: tfc_sess: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• [PATCH v2 2/3] drivers: target: target_core_tpg: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• [PATCH v2 1/3] drivers: target: target_core_device: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• Re: [RFC 9/9] __xfs_printk: Add durable name to output
  • From: Tony Asleson <tasleson@xxxxxxxxxx>
• [PATCH 3/3] drivers: target: tcm_fc: tfc_sess: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• [PATCH 2/3] drivers: target: target_core_tpg: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• [PATCH 1/3] drivers: target: target_core_device: Pass lockdep expression to RCU lists
  • From: Amol Grover <frextrite@xxxxxxxxx>
• Re: [PATCH 09/11] megaraid_sas: switch fusion adapters to MQ
  • From: John Garry <john.garry@xxxxxxxxxx>