Can you send me the output of:
# dmesg | grep "sd 2:0:0:0"
and
# sg_inq /dev/sdc
Thanks!
Relevant section from dmesg:
[11987.820542] scsi host6: uas
[11987.821278] scsi 6:0:0:0: Direct-Access Seagate Backup+ Hub BK
D781 PQ: 0 ANSI: 6
[11987.822003] sd 6:0:0:0: Attached scsi generic sg3 type 0
[11987.822117] sd 6:0:0:0: [sdc] Spinning up disk...
[11988.874931] .............ready
[12001.355881] sd 6:0:0:0: [sdc] 15628053167 512-byte logical blocks:
(8.00 TB/7.28 TiB)
[12001.388502] sd 6:0:0:0: [sdc] Write Protect is off
[12001.388511] sd 6:0:0:0: [sdc] Mode Sense: 4f 00 00 00
[12001.388843] sd 6:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[12001.389144] sd 6:0:0:0: [sdc] Optimal transfer size 33553920 bytes
[12001.475091] sd 6:0:0:0: [sdc] Attached SCSI disk
# sg_inq /dev/sdc
standard INQUIRY:
PQual=0 Device_type=0 RMB=0 LU_CONG=0 version=0x06 [SPC-4]
[AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=2
SCCS=0 ACC=0 TPGS=0 3PC=0 Protect=0 [BQue=0]
EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0
[RelAdr=0] WBus16=0 Sync=0 [Linked=0] [TranDis=0] CmdQue=1
[SPI: Clocking=0x0 QAS=0 IUS=0]
length=76 (0x4c) Peripheral device type: disk
Vendor identification: Seagate
Product identification: Backup+ Hub BK
Product revision level: D781
Unit serial number: NA9Q19AM
Hope this helps
