Re: [PATCH v6 3/7] scsi: ufs: introduce common delay function

[Can Guo <cang@xxxxxxxxxxxxxx>]

On 2020-03-16 16:52, Stanley Chu wrote:
> Introduce common delay function to collect all delay requirements
> to simplify driver and take choices of udelay and usleep_range into
> consideration.
>
> Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
> Reviewed-by: Avri Altman <avri.altman@xxxxxxx>

Reviewed-by: Can Guo <cang@xxxxxxxxxxxxxx>

> ---
>  drivers/scsi/ufs/ufshcd.c | 27 ++++++++++++++++++---------
>  drivers/scsi/ufs/ufshcd.h |  1 +
>  2 files changed, 19 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 314e808b0d4e..9fea346f7d22 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -597,6 +597,18 @@ static void ufshcd_print_pwr_info(struct ufs_hba 
> *hba)
>  		 hba->pwr_info.hs_rate);
>  }
>
> +void ufshcd_wait_us(unsigned long us, unsigned long tolerance, bool 
> can_sleep)
> +{
> +	if (!us)
> +		return;
> +
> +	if (us < 10 || !can_sleep)
> +		udelay(us);
> +	else
> +		usleep_range(us, us + tolerance);
> +}
> +EXPORT_SYMBOL_GPL(ufshcd_wait_us);
> +
>  /*
>   * ufshcd_wait_for_register - wait for register value to change
>   * @hba - per-adapter interface
> @@ -620,10 +632,7 @@ int ufshcd_wait_for_register(struct ufs_hba *hba,
> u32 reg, u32 mask,
>  	val = val & mask;
>
>  	while ((ufshcd_readl(hba, reg) & mask) != val) {
> -		if (can_sleep)
> -			usleep_range(interval_us, interval_us + 50);
> -		else
> -			udelay(interval_us);
> +		ufshcd_wait_us(interval_us, 50, can_sleep);
>  		if (time_after(jiffies, timeout)) {
>  			if ((ufshcd_readl(hba, reg) & mask) != val)
>  				err = -ETIMEDOUT;
> @@ -3565,7 +3574,7 @@ static inline void
> ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba)
>  	}
>
>  	/* allow sleep for extra 50us if needed */
> -	usleep_range(min_sleep_time_us, min_sleep_time_us + 50);
> +	ufshcd_wait_us(min_sleep_time_us, 50, true);
>  }
>
>  /**
> @@ -4289,7 +4298,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
>  	 * instruction might be read back.
>  	 * This delay can be changed based on the controller.
>  	 */
> -	usleep_range(1000, 1100);
> +	ufshcd_wait_us(1000, 100, true);
>
>  	/* wait for the host controller to complete initialization */
>  	retry = 10;
> @@ -4301,7 +4310,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
>  				"Controller enable failed\n");
>  			return -EIO;
>  		}
> -		usleep_range(5000, 5100);
> +		ufshcd_wait_us(5000, 100, true);
>  	}
>
>  	/* enable UIC related interrupts */
> @@ -6224,7 +6233,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
>  			reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
>  			if (reg & (1 << tag)) {
>  				/* sleep for max. 200us to stabilize */
> -				usleep_range(100, 200);
> +				ufshcd_wait_us(100, 100, true);
>  				continue;
>  			}
>  			/* command completed already */
> @@ -7786,7 +7795,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba 
> *hba)
>  	 */
>  	if (!ufshcd_is_link_active(hba) &&
>  	    hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM)
> -		usleep_range(2000, 2100);
> +		ufshcd_wait_us(2000, 100, true);
>
>  	/*
>  	 * If UFS device is either in UFS_Sleep turn off VCC rail to save 
> some
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 52425371082a..842f0223f5e5 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -792,6 +792,7 @@ int ufshcd_init(struct ufs_hba * , void __iomem *
> , unsigned int);
>  int ufshcd_make_hba_operational(struct ufs_hba *hba);
>  void ufshcd_remove(struct ufs_hba *);
>  int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
> +void ufshcd_wait_us(unsigned long us, unsigned long tolerance, bool 
> can_sleep);
>  int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
>  				u32 val, unsigned long interval_us,
>  				unsigned long timeout_ms, bool can_sleep);