We were setting bActiveICCLevel attribute for UFS device only once but
type of this attribute has changed from persistent to volatile since UFS
device specification v2.1. This attribute is set to the default value after
power cycle or hardware reset event. It isn't safe to rely on prefetched
data (only used for bActiveICCLevel attribute now). Hence this change
removes the code related to data prefetching and set this parameter on
every attempt to probe the UFS device.
Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 63aaa88f..99c7fca 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6458,11 +6458,12 @@ static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba,
return icc_level;
}
-static void ufshcd_init_icc_levels(struct ufs_hba *hba)
+static void ufshcd_set_active_icc_lvl(struct ufs_hba *hba)
{
int ret;
int buff_len = hba->desc_size.pwr_desc;
u8 *desc_buf;
+ u32 icc_level;
desc_buf = kmalloc(buff_len, GFP_KERNEL);
if (!desc_buf)
@@ -6477,20 +6478,17 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
goto out;
}
- hba->init_prefetch_data.icc_level =
- ufshcd_find_max_sup_active_icc_level(hba,
- desc_buf, buff_len);
- dev_dbg(hba->dev, "%s: setting icc_level 0x%x",
- __func__, hba->init_prefetch_data.icc_level);
+ icc_level = ufshcd_find_max_sup_active_icc_level(hba, desc_buf,
+ buff_len);
+ dev_dbg(hba->dev, "%s: setting icc_level 0x%x", __func__, icc_level);
ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
- QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0,
- &hba->init_prefetch_data.icc_level);
+ QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0, &icc_level);
if (ret)
dev_err(hba->dev,
"%s: Failed configuring bActiveICCLevel = %d ret = %d",
- __func__, hba->init_prefetch_data.icc_level , ret);
+ __func__, icc_level, ret);
out:
kfree(desc_buf);
@@ -6996,8 +6994,6 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
{
int ret;
- ufshcd_init_icc_levels(hba);
-
/* Add required well known logical units to scsi mid layer */
ret = ufshcd_scsi_add_wlus(hba);
if (ret)
@@ -7095,6 +7091,14 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async)
}
}
+ /*
+ * bActiveICCLevel is volatile for UFS device (as per latest v2.1 spec)
+ * and for removable UFS card as well, hence always set the parameter.
+ * Note: Error handler may issue the device reset hence resetting
+ * bActiveICCLevel as well so it is always safe to set this here.
+ */
+ ufshcd_set_active_icc_lvl(hba);
+
/* set the state as operational after switching to desired gear */
hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index d45a044..5652d39 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -404,15 +404,6 @@ struct ufs_clk_scaling {
bool is_suspended;
};
-/**
- * struct ufs_init_prefetch - contains data that is pre-fetched once during
- * initialization
- * @icc_level: icc level which was read during initialization
- */
-struct ufs_init_prefetch {
- u32 icc_level;
-};
-
#define UFS_ERR_REG_HIST_LENGTH 8
/**
* struct ufs_err_reg_hist - keeps history of errors
@@ -544,7 +535,6 @@ enum ufshcd_quirks {
* @intr_mask: Interrupt Mask Bits
* @ee_ctrl_mask: Exception event control mask
* @is_powered: flag to check if HBA is powered
- * @init_prefetch_data: data pre-fetched during initialization
* @eh_work: Worker to handle UFS errors that require s/w attention
* @eeh_work: Worker to handle exception events
* @errors: HBA errors
@@ -632,7 +622,6 @@ struct ufs_hba {
u32 intr_mask;
u16 ee_ctrl_mask;
bool is_powered;
- struct ufs_init_prefetch init_prefetch_data;
/* Work Queues */
struct work_struct eh_work;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
