Currently a 1 ms delay is applied before polling CONTROLLER_ENABLE
bit. This delay may not be required or can be changed in different
controllers. Make the delay as a changeable value in struct ufs_hba to
allow it customized by vendors.
Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
Reviewed-by: Avri Altman <avri.altman@xxxxxxx>
Reviewed-by: Can Guo <cang@xxxxxxxxxxxxxx>
---
drivers/scsi/ufs/ufshcd.c | 3 ++-
drivers/scsi/ufs/ufshcd.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index a42a84164dec..c5ee77a5bfc7 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4301,7 +4301,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
* instruction might be read back.
* This delay can be changed based on the controller.
*/
- usleep_range(1000, 1100);
+ ufshcd_delay_us(hba->hba_enable_delay_us, 100);
/* wait for the host controller to complete initialization */
retry = 10;
@@ -8424,6 +8424,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
hba->mmio_base = mmio_base;
hba->irq = irq;
+ hba->hba_enable_delay_us = 1000;
err = ufshcd_hba_init(hba);
if (err)
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 9a14ff3d5f8b..fa81dac9ae5a 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -663,6 +663,7 @@ struct ufs_hba {
u32 eh_flags;
u32 intr_mask;
u16 ee_ctrl_mask;
+ u16 hba_enable_delay_us;
bool is_powered;
struct ufs_init_prefetch init_prefetch_data;
--
2.18.0
