Hello, This patchset implements UFS inline crypto support on the DragonBoard 845c, using the Qualcomm Inline Crypto Engine (ICE) that's present on the Snapdragon 845 SoC. This is based on top of the patchset "[PATCH v8 00/11] Inline Encryption Support" by Satya Tangirala, which adds support for the UFS standard inline crypto, the block layer changes needed to use inline crypto, and support for inline crypto in fscrypt (ext4 and f2fs encryption). Link: https://lore.kernel.org/r/20200312080253.3667-1-satyat@xxxxxxxxxx This new patchset is mostly a RFC showing hardware inline crypto working on a publicly available development board that runs the mainline Linux kernel. While patches 1-2 could be applied now, patches 3-4 depend on the main "Inline Encryption Support" patchset being merged first. Most of the logic needed to use ICE is already handled by ufshcd-crypto and the blk-crypto framework, which are introduced by the "Inline Encryption Support" patchset. Therefore, this new patchset just adds the vendor-specific parts. I also only implemented support for version 3 of the ICE hardware, which seems to be easier to use than older versions; and for now I only implemented UFS support, not eMMC. (Note that unlike UFS, the eMMC crypto standard hasn't yet published, and I haven't yet found any upstream SoC that supports eMMC crypto.) Due to these factors and others, I was able to greatly simplify the driver from the vendor's original. It works fine in testing with fscrypt and with a blk-crypto self-test I'm also working on. This driver also works nearly as-is on Snapdragon 765 and Snapdragon 865, which are very recent SoCs, having just been announced in Dec 2019 (though these newer SoCs currently lack upstream kernel support). This patchset is also available in git at: Repo: https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git Tag: db845c-crypto-v3 Changed v2 => v3: - Rebased onto the v8 inline encryption patchset. Now the driver has to opt into inline crypto support rather than opting out. - Switched qcom_scm_ice_set_key() to use dma_alloc_coherent() so that we can reliably zeroing the key without assuming that bounce buffers aren't used. Also added a comment. - Made the key_size and data_unit_size arguments to qcom_scm_ice_set_key() be 'u32' instead of 'int'. Changed v1 => v2: - Rebased onto the v7 inline encryption patchset. - Account for all the recent qcom_scm changes. - Don't ignore errors from ->program_key(). - Don't dereference NULL hba->vops. - Dropped the patch that added UFSHCD_QUIRK_BROKEN_CRYPTO, as this flag is now included in the main inline encryption patchset. - Many other cleanups. Eric Biggers (4): firmware: qcom_scm: Add support for programming inline crypto keys arm64: dts: sdm845: add Inline Crypto Engine registers and clock scsi: ufs: add program_key() variant op scsi: ufs-qcom: add Inline Crypto Engine support MAINTAINERS | 2 +- arch/arm64/boot/dts/qcom/sdm845.dtsi | 13 +- drivers/firmware/qcom_scm.c | 101 +++++++++++ drivers/firmware/qcom_scm.h | 4 + drivers/scsi/ufs/Kconfig | 1 + drivers/scsi/ufs/Makefile | 4 +- drivers/scsi/ufs/ufs-qcom-ice.c | 244 +++++++++++++++++++++++++++ drivers/scsi/ufs/ufs-qcom.c | 12 +- drivers/scsi/ufs/ufs-qcom.h | 27 +++ drivers/scsi/ufs/ufshcd-crypto.c | 33 ++-- drivers/scsi/ufs/ufshcd.h | 3 + include/linux/qcom_scm.h | 19 +++ 12 files changed, 444 insertions(+), 19 deletions(-) create mode 100644 drivers/scsi/ufs/ufs-qcom-ice.c -- 2.25.1
