Linux SCSI

• Thread Index

• [PATCH 12/16] lpfc: Add debugfs support for cm framework buffers
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 11/16] lpfc: Add support for maintaining the cm statistics buffer
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 10/16] lpfc: Add rx monitoring statistics
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 09/16] lpfc: Add support for the CM framework
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 08/16] lpfc: add cmfsync WQE support
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 07/16] lpfc: Add support for cm enablement buffer
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 06/16] lpfc: Add cm statistics buffer support
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 05/16] lpfc: Add EDC ELS support
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 04/16] lpfc: Expand FPIN and RDF receive logging
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 03/16] lpfc: Add MIB feature enablement support
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 02/16] lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 00/16] lpfc: Update lpfc to revision 14.0.0.1
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 01/16] fc: Add EDC ELS definition
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v5 14/52] advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2] scsi: simplify scsi_get_vpd_page()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v5 0/5] Initial support for multi-actuator HDDs
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• RE: [PATCH V3 04/13] HV: Mark vmbus ring buffer visible to host in Isolation VM
  • From: Michael Kelley <mikelley@xxxxxxxxxxxxx>
• RE: [PATCH V3 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Michael Kelley <mikelley@xxxxxxxxxxxxx>
• RE: [PATCH V3 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Michael Kelley <mikelley@xxxxxxxxxxxxx>
• RE: [PATCH V3 02/13] x86/HV: Initialize shared memory boundary in the Isolation VM.
  • From: Michael Kelley <mikelley@xxxxxxxxxxxxx>
• RE: [PATCH V3 01/13] x86/HV: Initialize GHCB page in Isolation VM
  • From: Michael Kelley <mikelley@xxxxxxxxxxxxx>
• Re: [PATCH v5 01/52] core: Introduce the scsi_cmd_to_rq() function
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v5 0/5] Initial support for multi-actuator HDDs
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH v5 0/5] Initial support for multi-actuator HDDs
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v5 0/5] Initial support for multi-actuator HDDs
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH] scsi: cleanup scsi_get_vpd_page()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH V3 09/13] DMA: Add dma_map_decrypted/dma_unmap_encrypted() function
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [bug report] cross-tree: phase out dma_zalloc_coherent()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 6/8] block: remove the minors argument to __alloc_disk_node
  • From: Stefan Haberland <sth@xxxxxxxxxxxxx>
• Re: [PATCH v5 01/52] core: Introduce the scsi_cmd_to_rq() function
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V3 10/13] x86/Swiotlb: Add Swiotlb bounce buffer remap function for HV IVM
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V3 09/13] DMA: Add dma_map_decrypted/dma_unmap_encrypted() function
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v5 14/52] advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [PATCH v2 3/5] scsi: mpi3mr: Use the proper SCSI midlayer interfaces for PI
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• [PATCH 8/8] block: hold a request_queue reference for the lifetime of struct gendisk
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 7/8] block: pass a request_queue to __blk_alloc_disk
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 6/8] block: remove the minors argument to __alloc_disk_node
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 5/8] block: remove alloc_disk and alloc_disk_node
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 4/8] block: cleanup the lockdep handling in *alloc_disk
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 3/8] sg: do not allocate a gendisk
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v5 5/5] doc: Fix typo in request queue sysfs documentation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 4/5] doc: document sysfs queue/cranges attributes
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 3/5] libata: support concurrent positioning ranges log
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 2/5] scsi: sd: add concurrent positioning ranges support
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 1/5] block: Add concurrent positioning ranges support
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v5 0/5] Initial support for multi-actuator HDDs
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 2/8] st: do not allocate a gendisk
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 1/8] nvme: use blk_mq_alloc_disk
  • From: Christoph Hellwig <hch@xxxxxx>
• ensure each gendisk always has a request_queue reference
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] scsi: cleanup scsi_get_vpd_page()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v3 5/8] scsi: message: fusion: Remove unused parameter of mpt_pci driver's probe()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH] scsi: qedi: add missing curly braces
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v4 1/5] block: Add concurrent positioning ranges support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 14/52] advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 14/52] advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v5 14/52] advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: qedi: Add support for fastpath doorvell recovery
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 5/8] scsi: message: fusion: Remove unused parameter of mpt_pci driver's probe()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v4 5/5] doc: Fix typo in request queue sysfs documentation
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 4/5] doc: document sysfs queue/cranges attributes
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 3/5] libata: support concurrent positioning ranges log
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 2/5] scsi: sd: add concurrent positioning ranges support
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 1/5] block: Add concurrent positioning ranges support
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 0/5] Initial support for multi-actuator HDDs
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v2] scsi: qedi: Add support for fastpath doorvell recovery
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] [SCSI] megaraid_sas: Fix possible divide-by-zero bugs in megaraid_sas_fp.c
  • From: James Bottomley <jejb@xxxxxxxxxxxxx>
• [BUG] scsi: qla4xxx: possible double lock in qla4_82xx_wr_32()
  • From: Tuo Li <islituo@xxxxxxxxx>
• [PATCH] scsi: mpt3sas: Fix a possible divide-by-zero bug in base_mod64()
  • From: Tuo Li <islituo@xxxxxxxxx>
• [PATCH] [SCSI] megaraid_sas: Fix possible divide-by-zero bugs in megaraid_sas_fp.c
  • From: Tuo Li <islituo@xxxxxxxxx>
• [PATCH v3 0/8] PCI: Drop duplicated tracking of a pci_dev's bound driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 5/8] scsi: message: fusion: Remove unused parameter of mpt_pci driver's probe()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• [PATCH][next] scsi: smartpqi: Replace one-element array with flexible-array member
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: [PATCH v5 14/52] advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH v5 00/52] Remove the request pointer from struct scsi_cmnd
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v5 14/52] advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: "hch@xxxxxxxxxxxxx" <hch@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.4 5/6] scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 05/10] scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 06/10] scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 04/10] scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 4/6] scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 6/8] scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 5/8] scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 4/8] scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 06/11] scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 07/11] scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 05/11] scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 08/13] scsi: core: Fix capacity set to zero after offlinining device
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 07/13] scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 06/13] scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 05/13] scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 11/20] scsi: core: Fix capacity set to zero after offlinining device
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 09/20] scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 10/20] scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 08/20] scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 07/20] scsi: pm80xx: Fix TMF task completion race condition
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 11/24] scsi: core: Fix capacity set to zero after offlinining device
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 10/24] scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 08/24] scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 09/24] scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 07/24] scsi: pm80xx: Fix TMF task completion race condition
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [BUG] scsi: iscsi: possible null-pointer dereference in iscsit_tpg_add_network_portal()
  • From: Tuo Li <islituo@xxxxxxxxx>
• Re: [PATCH V3 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH] scsi: pmcraid: Remove unneeded semicolon
  • From: Jason Wang <wangborong@xxxxxxxxxx>
• [PATCH] scsi: ipr: Remove unneeded semicolon
  • From: Jason Wang <wangborong@xxxxxxxxxx>
• [PATCH] scsi: qlogicpti: Remove unneeded semicolon
  • From: Jason Wang <wangborong@xxxxxxxxxx>
• Re: [PATCH V3 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH V3 01/13] x86/HV: Initialize GHCB page in Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH v3 4/4] doc: document sysfs queue/cranges attributes
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH V3 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH V3 01/13] x86/HV: Initialize GHCB page in Isolation VM
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• [PATCH 2/2] scsi: qedf: fix error codes in qedf_alloc_global_queues()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 1/2] scsi: qedi: Fix error codes in qedi_alloc_global_queues()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] scsi: pcmcia: fdomain: Fix an error code in probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] scsi: smartpqi: Fix an error code in pqi_get_raid_map()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 4/4] doc: document sysfs queue/cranges attributes
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] libata: support concurrent positioning ranges log
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] scsi: sd: add concurrent positioning ranges support
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] block: Add concurrent positioning ranges support
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v2] scsi: target: pscsi: Fix possible null-pointer dereference in pscsi_complete_cmd()
  • From: Bodo Stroesser <bostroesser@xxxxxxxxx>
• Re: [PATCH v4 10/11] qla2xxx: Increment EDIF command and completion counts
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 18/52] cxlflash: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 17/52] csiostor: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 16/52] bnx2i: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 15/52] aha1542: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 14/52] advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 13/52] aacraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 12/52] NCR5380: Use sc_data_direction instead of rq_data_dir()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 11/52] 53c700: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 10/52] zfcp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 09/52] RDMA/srp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 08/52] RDMA/iser: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 07/52] ata: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 06/52] scsi_transport_spi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 05/52] scsi_transport_fc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 04/52] sr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 03/52] sd: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 02/52] core: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 01/52] core: Introduce the scsi_cmd_to_rq() function
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] scsi: aha1542: Remove unneeded semicolon
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 00/52] Remove the request pointer from struct scsi_cmnd
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1 0/2] two changes for UFS/HPB
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Remove useless if-state in ufshcd_add_command_trace
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next[next]] scsi: qla2xxx: Remove redundant initialization of variable num_cnt
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qla2xxx: Fix use after free in debug code
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 00/18] UFS patches for kernel v5.15
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [Resend PATCH v4] scsi: target: tcmu: Add new feature KEEP_BUF
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [Bug 212337] scsi_debug: race at module load and module unload
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH 1/1] scsi: storvsc: Log TEST_UNIT_READY errors as warnings
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] lpfc: move initialization of phba->poll_list earlier to avoid crash
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: mpt3sas: Fix incorrectly assigned error return and check
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v2 14/14] qla2xxx: Update version to 10.02.06.100-k
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 13/14] qla2xxx: Sync queue idx with queue_pair_map idx
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 12/14] qla2xxx: Changes to support kdump kernel for NVMe BFS
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 11/14] qla2xxx: Changes to support kdump kernel
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 09/14] qla2xxx: fix npiv create erroneous error
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 10/14] qla2xxx: suppress unnecessary log messages during login
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 08/14] qla2xxx: fix unsafe removal from link list
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 07/14] qla2xxx: fix port type info
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 06/14] qla2xxx: add debug print of 64G link speed
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 05/14] qla2xxx: Show OS name and version in FDMI-1
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 04/14] qla2xxx: Changes to support FCP2 Target
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 03/14] qla2xxx: adjust request/response queue size for 28xx
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 02/14] qla2xxx: Change %p to %px in the log messages
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 01/14] qla2xxx: Add host attribute to trigger MPI hang
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 00/14] qla2xxx driver bug fixes
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2] scsi: target: pscsi: Fix possible null-pointer dereference in pscsi_complete_cmd()
  • From: Tuo Li <islituo@xxxxxxxxx>
• Re: [PATCH 0/4] scsi: ufs: Few HPB fixes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: qedi: Add support for fastpath doorvell recovery
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: pm8001: Remove redundant initialization of variable rv
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: ufshpb: Remove redundant initialization of variable lba
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: elx: efct: Remove redundant initialization of variable ret
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: fdomain: Fix error return code in fdomain_probe()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: snic: Remove redundant assignment to variable ret
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] ibmvfc: do not wait for initial device scan
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V5] scsi: ufshcd: Fix device links when BOOT WLUN fails to probe
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next] scsi: ufs: Fix unsigned int compared with less than zero
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] mpt3sas: Use Firmware Recommended Queue Depth.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v4 10/10] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH RESEND] mpt3sas: Bump driver version to 38.100.00.00
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] mpt3sas: Add io_uring iopoll support
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] lpfc: move initialization of phba->poll_list earlier to avoid crash
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH v5 52/52] core: Remove the request member from struct scsi_cmnd
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 51/52] usb-storage: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 50/52] tcm_loop: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 49/52] xen-scsifront: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 48/52] virtio_scsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 47/52] ufs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 46/52] sym53c8xx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 45/52] sun3_scsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 44/52] stex: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 43/52] snic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 42/52] smartpqi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 41/52] scsi_debug: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 40/52] qlogicpti: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 39/52] qla4xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 37/52] qla1280: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 38/52] qla2xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 36/52] qedi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 35/52] qedf: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 34/52] ncr53c8xx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 33/52] myrs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 32/52] myrb: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 31/52] mvumi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 30/52] mpt3sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 29/52] mpi3mr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 28/52] megaraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 27/52] lpfc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 26/52] libsas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 25/52] ips: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 24/52] ibmvscsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 23/52] ibmvfc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 22/52] hpsa: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 21/52] hisi_sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 20/52] fnic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 18/52] cxlflash: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 19/52] dpt_i2o: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 17/52] csiostor: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 16/52] bnx2i: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 15/52] aha1542: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 14/52] advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 13/52] aacraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 12/52] NCR5380: Use sc_data_direction instead of rq_data_dir()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 11/52] 53c700: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 10/52] zfcp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 09/52] RDMA/srp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 08/52] RDMA/iser: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 07/52] ata: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 05/52] scsi_transport_fc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 04/52] sr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 06/52] scsi_transport_spi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 03/52] sd: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 02/52] core: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 01/52] core: Introduce the scsi_cmd_to_rq() function
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v5 00/52] Remove the request pointer from struct scsi_cmnd
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH V3 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Dave Hansen <dave.hansen@xxxxxxxxx>
• Re: [PATCH v2 2/5] scsi: isci: Use the proper SCSI midlayer interfaces for PI
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 1/5] scsi: core: Add helper to return number of logical blocks in a request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 06/11] blk-mq: Pass driver tags to blk_mq_clear_rq_mapping()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH V3 13/13] HV/Storvsc: Add Isolation VM support for storvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 12/13] HV/Netvsc: Add Isolation VM support for netvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 11/13] HV/IOMMU: Enable swiotlb bounce buffer for Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 10/13] x86/Swiotlb: Add Swiotlb bounce buffer remap function for HV IVM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 09/13] DMA: Add dma_map_decrypted/dma_unmap_encrypted() function
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 04/13] HV: Mark vmbus ring buffer visible to host in Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 08/13] HV/Vmbus: Initialize VMbus ring buffer for Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 07/13] HV/Vmbus: Add SNP support for VMbus channel initiate message
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 05/13] HV: Add Write/Read MSR registers via ghcb page
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 06/13] HV: Add ghcb hvcall support for SNP VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 02/13] x86/HV: Initialize shared memory boundary in the Isolation VM.
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 01/13] x86/HV: Initialize GHCB page in Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V3 00/13] x86/Hyper-V: Add Hyper-V Isolation VM support
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH v2 06/11] blk-mq: Pass driver tags to blk_mq_clear_rq_mapping()
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 06/11] blk-mq: Pass driver tags to blk_mq_clear_rq_mapping()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH v1 0/2] scsi: ufs: introduce vendor isr
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] lpfc: move initialization of phba->poll_list earlier to avoid crash
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• [PATCH v2 08/11] blk-mq: Add blk_mq_ops.init_request_no_hctx()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 00/11] blk-mq: Reduce static requests memory footprint for shared sbitmap
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 07/11] blk-mq: Add blk_mq_tag_update_sched_shared_sbitmap()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 06/11] blk-mq: Pass driver tags to blk_mq_clear_rq_mapping()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 11/11] blk-mq: Stop using pointers for blk_mq_tags bitmap tags
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 10/11] blk-mq: Use shared tags for shared sbitmap support
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 05/11] blk-mq-sched: Rename blk_mq_sched_alloc_{tags -> map_and_request}()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 09/11] scsi: Set blk_mq_ops.init_request_no_hctx
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 02/11] block: Rename BLKDEV_MAX_RQ -> BLKDEV_DEFAULT_RQ
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 04/11] blk-mq: Invert check in blk_mq_update_nr_requests()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 03/11] blk-mq: Relocate shared sbitmap resize in blk_mq_update_nr_requests()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 01/11] blk-mq: Change rqs check in blk_mq_free_rqs()
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2] scsi: core: Fix hang of freezing queue between blocking and running device
  • From: <lijinlin3@xxxxxxxxxx>
• Re: [PATCH] scsi: target: pscsi: Fix possible null-pointer dereference in pscsi_complete_cmd()
  • From: Tuo Li <islituo@xxxxxxxxx>
• Re: [PATCH] scsi: target: pscsi: Fix possible null-pointer dereference in pscsi_complete_cmd()
  • From: Bodo Stroesser <bostroesser@xxxxxxxxx>
• [PATCH] ibmvfc: do not wait for initial device scan
  • From: mwilck@xxxxxxxx
• Re: [PATCH v4 01/10] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• RE: [RFC PATCH v1 0/2] scsi: ufs: introduce vendor isr
  • From: "Kiwoong Kim" <kwmad.kim@xxxxxxxxxxx>
• RE: [RFC PATCH v1 1/2] scsi: ufs: introduce vendor isr
  • From: "Kiwoong Kim" <kwmad.kim@xxxxxxxxxxx>
• RE: [RFC PATCH v1 2/2] scsi: ufs: ufs-exynos: implement exynos isr
  • From: "Kiwoong Kim" <kwmad.kim@xxxxxxxxxxx>
• [PATCH 2/2] mpt3sas: Update driver version to 39.100.00.00
  • From: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 1/2] mpt3sas: Use FW recommended device QD
  • From: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
• [PATCH 0/2] mpt3sas: Use Firmware Recommended Queue Depth.
  • From: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: [PATCH v4 09/10] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v4 03/10] libata: fix sparse warning
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v4 01/10] libata: fix ata_host_alloc_pinfo()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2] parisc: Make struct parisc_driver::remove() return void
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• [PATCH 4/4] scsi: ufshpb: Do not report victim error in HCM
  • From: Avri Altman <avri.altman@xxxxxxx>
• [PATCH 3/4] scsi: ufshpb: Verify that num_inflight_map_req is non-negative
  • From: Avri Altman <avri.altman@xxxxxxx>
• [PATCH 2/4] scsi: ufshpb: Use a correct max multi chunk
  • From: Avri Altman <avri.altman@xxxxxxx>
• [PATCH 1/4] scsi: ufshpb: re-wind the read timeout on every read
  • From: Avri Altman <avri.altman@xxxxxxx>
• [PATCH 0/4] scsi: ufs: Few HPB fixes
  • From: Avri Altman <avri.altman@xxxxxxx>
• RE: [RFC PATCH v1 0/2] scsi: ufs: introduce vendor isr
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH v4 12/52] NCR5380: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Finn Thain <fthain@xxxxxxxxxxxxxx>
• Re: [PATCH v4 12/52] NCR5380: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] scsi: target: pscsi: Fix possible null-pointer dereference in pscsi_complete_cmd()
  • From: Tuo Li <islituo@xxxxxxxxx>
• Re: [PATCH v2] parisc: Make struct parisc_driver::remove() return void
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [PATCH] scsi: aha1542: Remove unneeded semicolon
  • From: Jason Wang <wangborong@xxxxxxxxxx>
• Re: [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] parisc: Make struct parisc_driver::remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] parisc: Make struct parisc_driver::remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 10/10] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 09/10] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 08/10] libata: print feature list on device scan
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 07/10] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 06/10] libata: cleanup NCQ priority handling
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 05/10] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 04/10] libata: cleanup device sleep capability detection
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 03/10] libata: fix sparse warning
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 02/10] libata: fix ata_host_start()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 01/10] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v4 00/10] libata cleanups and improvements
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v2 4/5] scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/9] libata: fix ata_host_start()
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH][next] scsi: ufs: Fix unsigned int compared with less than zero
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v4 12/52] NCR5380: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Michael Schmitz <schmitzmic@xxxxxxxxx>
• Re: [PATCH v4 08/52] RDMA/iser: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Sagi Grimberg <sagi@xxxxxxxxxxx>
• Re: [PATCH] parisc: Make struct parisc_driver::remove() return void
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] parisc: Make struct parisc_driver::remove() return void
  • From: Corey Minyard <minyard@xxxxxxx>
• [PATCH 1/1] scsi: storvsc: Log TEST_UNIT_READY errors as warnings
  • From: Michael Kelley <mikelley@xxxxxxxxxxxxx>
• Re: [RFC PATCH v1 2/2] scsi: ufs: ufs-exynos: implement exynos isr
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [RFC PATCH v1 1/2] scsi: ufs: introduce vendor isr
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [RFC PATCH v1 0/2] scsi: ufs: introduce vendor isr
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4 12/52] NCR5380: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v5 01/14] genirq: Provide new interfaces for affinity hints
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v5 00/14] genirq: Cleanup the abuse of irq_set_affinity_hint()
  • From: Nitesh Lal <nilal@xxxxxxxxxx>
• [PATCH][next] scsi: ufs: Fix unsigned int compared with less than zero
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/9] libata: fix ata_host_start()
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 2/9] libata: fix ata_host_start()
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH V5] scsi: ufshcd: Fix device links when BOOT WLUN fails to probe
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH V4 2/2] scsi: ufshcd: Fix device links when BOOT WLUN fails to probe
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH] scsi: core: Run queue first after running device
  • From: lijinlin <lijinlin3@xxxxxxxxxx>
• Re: [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v3 4/9] libata: cleanup ata_dev_configure()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v5 04/14] scsi: megaraid_sas: Use irq_set_affinity_and_hint
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH] scsi: snic: Remove redundant assignment to variable ret
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH v3 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 7/9] libata: print feature list on device scan
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 6/9] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 5/9] libata: cleanup NCQ priority handling
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 4/9] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 3/9] libata: cleanup device sleep capability detection
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 2/9] libata: fix ata_host_start()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v3 0/9] libata cleanups and improvements
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH] parisc: Make struct parisc_driver::remove() return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v4 12/52] NCR5380: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Finn Thain <fthain@xxxxxxxxxxxxxx>
• Re: [PATCH v2 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 7/9] libata: print feature list on device scan
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 6/9] libata: fix ata_read_log_page() warning
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 5/9] libata: cleanup NCQ priority handling
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 4/9] libata: cleanup ata_dev_configure()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH] scsi: core: Run queue first after running device.
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] scsi: core: Run queue first after running device.
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH] scsi: ufs: Remove ufshcd_variant_hba_init/exit()
  • From: Keoseong Park <keosung.park@xxxxxxxxxxx>
• Re: [PATCH v5 05/14] scsi: mpt3sas: Use irq_set_affinity_and_hint
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 3/9] libata: cleanup device sleep capability detection
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 2/9] libata: fix ata_host_start()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v4 26/52] libsas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 9/9] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 8/9] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 7/9] libata: print feature list on device scan
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 6/9] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 5/9] libata: cleanup NCQ priority handling
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 4/9] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 3/9] libata: cleanup device sleep capability detection
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 2/9] libata: fix ata_host_start()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 1/9] libata: fix ata_host_alloc_pinfo()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH v2 0/9] libata cleanups and improvements
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [RFC PATCH v1 2/2] scsi: ufs: ufs-exynos: implement exynos isr
  • From: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
• [RFC PATCH v1 0/2] scsi: ufs: introduce vendor isr
  • From: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
• [RFC PATCH v1 1/2] scsi: ufs: introduce vendor isr
  • From: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
• Re: [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• [PATCH v2 5/5] scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v2 3/5] scsi: mpi3mr: Use the proper SCSI midlayer interfaces for PI
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v2 4/5] scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v2 1/5] scsi: core: Add helper to return number of logical blocks in a request
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH v2 2/5] scsi: isci: Use the proper SCSI midlayer interfaces for PI
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Use the proper SCSI midlayer interface for PI
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v1 0/2] two changes for UFS/HPB
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next[next]] scsi: qla2xxx: Remove redundant initialization of variable num_cnt
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qla2xxx: Fix use after free in debug code
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Remove useless if-state in ufshcd_add_command_trace
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v5 00/14] genirq: Cleanup the abuse of irq_set_affinity_hint()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/3] Log correct rpmb unit descriptor size
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V4 2/2] scsi: ufshcd: Fix device links when BOOT WLUN fails to probe
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 10/15] sd: use bvec_virt
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 02/15] block: use bvec_virt in bio_integrity_{process,free}
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 01/15] bvec: add a bvec_virt helper
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Initial support for multi-actuator HDDs
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH] scsi: mark scsi_dispatch_cmd as noinline
  • From: Kevin Mitchell <kevmitch@xxxxxxxxxx>
• RE: [PATCH v4 22/52] hpsa: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: <Don.Brace@xxxxxxxxxxxxx>
• Re: [PATCH V4 2/2] scsi: ufshcd: Fix device links when BOOT WLUN fails to probe
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [PATCH v4 47/52] ufs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Daejun Park <daejun7.park@xxxxxxxxxxx>
• [PATCH v4 52/52] core: Remove the request member from struct scsi_cmnd
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 51/52] usb-storage: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 50/52] tcm_loop: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 49/52] xen-scsifront: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 47/52] ufs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 48/52] virtio_scsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 46/52] sym53c8xx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 45/52] sun3_scsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 44/52] stex: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 43/52] snic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 42/52] smartpqi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 41/52] scsi_debug: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 40/52] qlogicpti: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 39/52] qla4xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 38/52] qla2xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 37/52] qla1280: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 36/52] qedi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 35/52] qedf: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 34/52] ncr53c8xx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 33/52] myrs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 32/52] myrb: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 31/52] mvumi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 30/52] mpt3sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 29/52] mpi3mr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 28/52] megaraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 27/52] lpfc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 26/52] libsas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 25/52] ips: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 24/52] ibmvscsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 23/52] ibmvfc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 22/52] hpsa: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 21/52] hisi_sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 20/52] fnic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 19/52] dpt_i2o: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 18/52] cxlflash: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 15/52] aha1542: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 16/52] bnx2i: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 17/52] csiostor: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 13/52] aacraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 12/52] NCR5380: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 11/52] 53c700: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 14/52] advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 07/52] ata: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 08/52] RDMA/iser: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 09/52] RDMA/srp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 10/52] zfcp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 06/52] scsi_transport_spi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 05/52] scsi_transport_fc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 04/52] sr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 03/52] sd: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 02/52] core: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 01/52] core: Introduce the scsi_cmd_to_rq() function
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v4 00/52] Remove the request pointer from struct scsi_cmnd
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [dm-devel] [PATCH 10/15] sd: use bvec_virt
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [PATCH 14/14] qla2xxx: Update version to 10.02.06.100-k
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• Re: [PATCH V2 11/14] x86/Swiotlb: Add Swiotlb bounce buffer remap function for HV IVM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH 14/14] qla2xxx: Update version to 10.02.06.100-k
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 13/14] qla2xxx: Sync queue idx with queue_pair_map idx
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH V2 10/14] DMA: Add dma_map_decrypted/dma_unmap_encrypted() function
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH 12/14] qla2xxx: Changes to support kdump kernel for NVMe BFS
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 11/14] qla2xxx: Changes to support kdump kernel
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH V2 03/14] x86/set_memory: Add x86_set_memory_enc static call support
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH 10/14] qla2xxx: suppress unnecessary log messages during login
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 09/14] qla2xxx: fix npiv create erroneous error
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 08/14] qla2xxx: fix unsafe removal from link list
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 07/14] qla2xxx: fix port type info
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 06/14] qla2xxx: fix debug print of 64G link speed
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 05/14] qla2xxx: Show OS name and version in FDMI-1
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 04/14] qla2xxx: Changes to support FCP2 Target
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 01/14] qla2xxx: Add host attribute to trigger MPI hang
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 03/14] qla2xxx: adjust request/response queue size for 28xx
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 02/14] qla2xxx: Change %p to %px in the log messages
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH v2 5/6] PCI: Adapt all code locations to not use struct pci_dev::driver directly
  • From: Andrew Donnellan <ajd@xxxxxxxxxxxxx>
• Re: [PATCH V2 03/14] x86/set_memory: Add x86_set_memory_enc static call support
  • From: Dave Hansen <dave.hansen@xxxxxxxxx>
• Re: [PATCH V2 03/14] x86/set_memory: Add x86_set_memory_enc static call support
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH 08/15] virtio_blk: use bvec_virt
  • From: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
• Re: [PATCH V2 03/14] x86/set_memory: Add x86_set_memory_enc static call support
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH net-next v4] ethernet: fix PTP_1588_CLOCK dependencies
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH V2 03/14] x86/set_memory: Add x86_set_memory_enc static call support
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH] scsi: core: Run queue first after running device.
  • From: <lijinlin3@xxxxxxxxxx>
• Re: [PATCH net-next v4] ethernet: fix PTP_1588_CLOCK dependencies
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH net-next v4] ethernet: fix PTP_1588_CLOCK dependencies
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH net-next v4] ethernet: fix PTP_1588_CLOCK dependencies
  • From: Julian Calaby <julian.calaby@xxxxxxxxx>
• Re: [PATCH 07/15] rbd: use bvec_virt
  • From: Jeff Layton <jlayton@xxxxxxxxxx>
• [PATCH 14/14] qla2xxx: Update version to 10.02.06.100-k
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 13/14] qla2xxx: Sync queue idx with queue_pair_map idx
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 12/14] qla2xxx: Changes to support kdump kernel for NVMe BFS
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 11/14] qla2xxx: Changes to support kdump kernel
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 10/14] qla2xxx: suppress unnecessary log messages during login
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 09/14] qla2xxx: fix npiv create erroneous error
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 08/14] qla2xxx: fix unsafe removal from link list
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 07/14] qla2xxx: fix port type info
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 06/14] qla2xxx: fix debug print of 64G link speed
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 05/14] qla2xxx: Show OS name and version in FDMI-1
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 04/14] qla2xxx: Changes to support FCP2 Target
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 03/14] qla2xxx: adjust request/response queue size for 28xx
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 02/14] qla2xxx: Change %p to %px in the log messages
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 01/14] qla2xxx: Add host attribute to trigger MPI hang
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 00/14] qla2xxx driver bug fixes
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH net-next v4] ethernet: fix PTP_1588_CLOCK dependencies
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• RE: [PATCH v1 2/2] scsi: ufs: Add lu_enable sysfs node
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v1 1/2] scsi: ufs: Add L2P entry swap quirk for Micron UFS in HPB READ command
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH 02/15] block: use bvec_virt in bio_integrity_{process,free}
  • From: Chaitanya Kulkarni <ckulkarnilinux@xxxxxxxxx>
• Re: [PATCH 01/15] bvec: add a bvec_virt helper
  • From: Chaitanya Kulkarni <ckulkarnilinux@xxxxxxxxx>
• [PATCH v2 4/4][next] scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_PD_CFG_SEQ_NUM_SYNC
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH v2 3/4][next] scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_DRV_RAID_MAP
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH v2 2/4][next] scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_FW_RAID_MAP_DYNAMIC
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH v2 1/4][next] scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_FW_RAID_MAP
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH v2 0/4][next] scsi: megaraid_sas: Replace one-element arrays with flexible-array members
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH 4/4][next] scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_PD_CFG_SEQ_NUM_SYNC
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH 3/4][next] scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_DRV_RAID_MAP
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH 2/4][next] scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_FW_RAID_MAP_DYNAMIC
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH 1/4][next] scsi: megaraid_sas: Replace one-element array with flexible-array member in MR_FW_RAID_MAP_ALL
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH 0/4][next] Replace one-element arrays with flexible-array members
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH v2] scsi: qedi: Add support for fastpath doorvell recovery
  • From: Shai Malin <smalin@xxxxxxxxxxx>
• Re: [PATCH 13/15] dasd: use bvec_virt
  • From: Stefan Haberland <sth@xxxxxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.14-rc4
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] scsi: qedi: Add support for fastpath doorvell recovery
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V2 03/14] x86/set_memory: Add x86_set_memory_enc static call support
  • From: Dave Hansen <dave.hansen@xxxxxxxxx>
• [PATCH V2 13/14] HV/Netvsc: Add Isolation VM support for netvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 14/14] HV/Storvsc: Add Isolation VM support for storvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 12/14] HV/IOMMU: Enable swiotlb bounce buffer for Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 11/14] x86/Swiotlb: Add Swiotlb bounce buffer remap function for HV IVM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 08/14] HV/Vmbus: Add SNP support for VMbus channel initiate message
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 09/14] HV/Vmbus: Initialize VMbus ring buffer for Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 06/14] HV: Add Write/Read MSR registers via ghcb page
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 07/14] HV: Add ghcb hvcall support for SNP VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 10/14] DMA: Add dma_map_decrypted/dma_unmap_encrypted() function
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 04/14] x86/HV: Add new hvcall guest address host visibility support
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 05/14] HV: Mark vmbus ring buffer visible to host in Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 03/14] x86/set_memory: Add x86_set_memory_enc static call support
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 02/14] x86/HV: Initialize shared memory boundary in the Isolation VM.
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 01/14] x86/HV: Initialize GHCB page in Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V2 00/14] x86/Hyper-V: Add Hyper-V Isolation VM support
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH v1 1/2] scsi: ufs: Add L2P entry swap quirk for Micron UFS in HPB READ command
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v1 2/2] scsi: ufs: Add lu_enable sysfs node
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v1 0/2] two changes for UFS/HPB
  • From: Bean Huo <huobean@xxxxxxxxx>
• [GIT PULL] SCSI fixes for 5.14-rc4
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/15] bcache: use bvec_virt
  • From: Coly Li <colyli@xxxxxxx>
• [PATCH] scsi: qedi: Add support for fastpath doorvell recovery
  • From: Shai Malin <smalin@xxxxxxxxxxx>
• Re: [PATCH V4 2/2] scsi: ufshcd: Fix device links when BOOT WLUN fails to probe
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH][next[next]] scsi: qla2xxx: Remove redundant initialization of variable num_cnt
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH][next[next]] scsi: qla2xxx: Remove redundant initialization of variable num_cnt
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• [PATCH] scsi: pm8001: Remove redundant initialization of variable rv
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH 15/15] nvme: use bvec_virt
  • From: Keith Busch <kbusch@xxxxxxxxxx>
• [PATCH] scsi: mpt3sas: Fix incorrectly assigned error return and check
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] scsi: ufs: ufshpb: Remove redundant initialization of variable lba
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] scsi: elx: efct: Remove redundant initialization of variable ret
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH][next[next]] scsi: qla2xxx: Remove redundant initialization of variable num_cnt
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH 2/6] mmc: mmc_spi: replace flush_kernel_dcache_page with flush_dcache_page
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/6] mmc: JZ4740: remove the flush_kernel_dcache_page call in jz4740_mmc_read_data
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH 15/15] nvme: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 11/15] ubd: use bvec_virt
  • From: Anton Ivanov <anton.ivanov@xxxxxxxxxxxxxxxxxx>
• [PATCH 14/15] dcssblk: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 13/15] dasd: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 12/15] ps3vram: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 11/15] ubd: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 10/15] sd: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 09/15] bcache: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 08/15] virtio_blk: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 07/15] rbd: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 06/15] squashfs: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 05/15] dm-integrity: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 04/15] dm-ebs: use bvec_virt
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 03/15] dm: make EBS depend on !HIGHMEM
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 02/15] block: use bvec_virt in bio_integrity_{process,free}
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 01/15] bvec: add a bvec_virt helper
  • From: Christoph Hellwig <hch@xxxxxx>
• add a bvec_virt helper
  • From: Christoph Hellwig <hch@xxxxxx>
• RE: [PATCH] scsi: ufs: Remove useless if-state in ufshcd_add_command_trace
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH 14/15] scsi: ufs: ufs-exynos: multi-host configuration for exynosauto
  • From: "Chanho Park" <chanho61.park@xxxxxxxxxxx>
• Re: [PATCH] scsi: dm-mpath: do not fail paths when the target returns ALUA state transition
  • From: Brian Bunker <brian@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 11/18] scsi: ufs: Revert "Utilize Transfer Request List Completion Notification Register"
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: qla2xxx: Fix use after free in debug code
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 14/15] scsi: ufs: ufs-exynos: multi-host configuration for exynosauto
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH] scsi: qla2xxx: Fix use after free in debug code
  • From: Ewan Milne <emilne@xxxxxxxxxx>
• [PATCH] scsi: qla2xxx: Fix use after free in debug code
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH RESEND] mpt3sas: Bump driver version to 38.100.00.00
  • From: Lee Duncan <lduncan@xxxxxxxx>
• [v3 2/2] scsi: target: fix sense key for invalid XCOPY request
  • From: Sergey Samoylenko <s.samoylenko@xxxxxxxxx>
• [v3 1/2] scsi: target: allows backend drivers to fail with specific sense codes
  • From: Sergey Samoylenko <s.samoylenko@xxxxxxxxx>
• [v3 0/2] scsi: target: fix sense key for invalid XCOPY request
  • From: Sergey Samoylenko <s.samoylenko@xxxxxxxxx>
• Re: [PATCH v2 5/6] PCI: Adapt all code locations to not use struct pci_dev::driver directly
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH v2 5/6] PCI: Adapt all code locations to not use struct pci_dev::driver directly
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/6] PCI: Provide wrapper to access a pci_dev's bound driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 5/6] PCI: Adapt all code locations to not use struct pci_dev::driver directly
  • From: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
• Re: [v2 1/2] target: allows backend drivers to fail with specific sense codes
  • From: David Disseldorp <ddiss@xxxxxxx>
• [PATCH v2 6/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] PCI: Adapt all code locations to not use struct pci_dev::driver directly
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 0/6] PCI: Drop duplicated tracking of a pci_dev's bound driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 4/6] PCI: Provide wrapper to access a pci_dev's bound driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] libata: cleanup ata_dev_configure()
  • From: kernel test robot <rong.a.chen@xxxxxxxxx>
• Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• [PATCH RESEND] mpt3sas: Bump driver version to 38.100.00.00
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• Re: [PATCH v3 00/18] UFS patches for kernel v5.15
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [Resend PATCH v4] scsi: target: tcmu: Add new feature KEEP_BUF
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• RE: [v2 1/2] target: allows backend drivers to fail with specific sense codes
  • From: Sergey Samoylenko <s.samoylenko@xxxxxxxxx>
• [PATCH] scsi: ufs: Remove useless if-state in ufshcd_add_command_trace
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v5 00/14] genirq: Cleanup the abuse of irq_set_affinity_hint()
  • From: Nitesh Lal <nilal@xxxxxxxxxx>
• Re: [PATCH v3 11/18] scsi: ufs: Revert "Utilize Transfer Request List Completion Notification Register"
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH v3 18/18] scsi: ufs: Add fault injection support
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH v3 17/18] scsi: ufs: Retry aborted SCSI commands instead of completing these successfully
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH v3 16/18] scsi: ufs: Synchronize SCSI and UFS error handling
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH 13/13] HV/Storvsc: Add Isolation VM support for storvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH 06/13] HV: Add ghcb hvcall support for SNP VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH 13/13] HV/Storvsc: Add Isolation VM support for storvsc driver
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH 05/13] HV: Add Write/Read MSR registers via ghcb page
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH v3 15/18] scsi: ufs: Request sense data asynchronously
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH v3 14/18] scsi: ufs: Fix the SCSI abort handler
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Juergen Gross <jgross@xxxxxxxx>
• Re: [PATCH 04/13] HV: Mark vmbus ring buffer visible to host in Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH v1 4/5] PCI: Adapt all code locations to not use struct pci_dev::driver directly
  • From: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
• Re: [PATCH 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH 04/13] HV: Mark vmbus ring buffer visible to host in Isolation VM
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH 07/13] HV/Vmbus: Add SNP support for VMbus channel initiate message
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH 04/13] HV: Mark vmbus ring buffer visible to host in Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH 06/13] HV: Add ghcb hvcall support for SNP VM
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH 01/13] x86/HV: Initialize GHCB page in Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH 05/13] HV: Add Write/Read MSR registers via ghcb page
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH v3 13/18] scsi: ufs: Optimize SCSI command processing
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH 04/13] HV: Mark vmbus ring buffer visible to host in Isolation VM
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH 03/13] x86/HV: Add new hvcall guest address host visibility support
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH 01/13] x86/HV: Initialize GHCB page in Isolation VM
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• RE: [PATCH v2 2/3] bnx2x: remove unused variable 'cur_data_offset'
  • From: Prabhakar Kushwaha <pkushwaha@xxxxxxxxxxx>
• [PATCH 7/7] scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 6/7] libahci: Introduce ncq_prio_supported sysfs sttribute
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 5/7] libata: print feature list on device scan
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 3/7] libata: cleanup NCQ priority handling
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 4/7] libata: fix ata_read_log_page() warning
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 1/7] libata: cleanup device sleep capability detection
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 2/7] libata: cleanup ata_dev_configure()
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• [PATCH 0/7] libata cleanups and improvements
  • From: Damien Le Moal <damien.lemoal@xxxxxxx>
• Re: [PATCH v3 04/18] scsi: ufs: Rename the second ufshcd_probe_hba() argument
  • From: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
• RE: [PATCH] scsi: BusLogic: use %X for u32 sized integer rather than %lX
  • From: David Laight <David.Laight@xxxxxxxxxx>
• RE: [PATCH V4 2/2] scsi: ufshcd: Fix device links when BOOT WLUN fails to probe
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH V4 2/2] scsi: ufshcd: Fix device links when BOOT WLUN fails to probe
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [Resend PATCH v4] scsi: target: tcmu: Add new feature KEEP_BUF
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH] scsi: qla4xxx: convert uses of __constant_cpu_to_<foo> to cpu_to_<foo>
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: BusLogic: use %X for u32 sized integer rather than %lX
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: two bsg fixes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [BUG]scsi: bnx2fc: bnx2fc_els.c: two refcount leak in function bnx2fc_initiate_seq_cleanup and bnx2fc_eh_abort
  • From: 亿一 <teroincn@xxxxxxxxx>
• Re: [PATCH v3 03/18] scsi: ufs: Only include power management code if necessary
  • From: Stanley Chu <chu.stanley@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 02/18] scsi: ufs: Reduce power management code duplication
  • From: Stanley Chu <chu.stanley@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 4/5] PCI: Adapt all code locations to not use struct pci_dev::driver directly
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] scsi: csiostor: fix possible null-pointer dereference in csio_eh_lun_reset_handler()
  • From: Tuo Li <islituo@xxxxxxxxx>
• [PATCH] megaraid: fix possible uninitialized-variable access in megadev_ioctl()
  • From: Tuo Li <islituo@xxxxxxxxx>
• [PATCH 2/2] bsg-lib: fix commands without data transfer in bsg_transport_sg_io_fn
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 1/2] scsi: bsg: fix commands without data transfer in scsi_bsg_sg_io_fn
  • From: Christoph Hellwig <hch@xxxxxx>
• two bsg fixes
  • From: Christoph Hellwig <hch@xxxxxx>
• [BUG] scsi: pcmcia: nsp_cs: possible null-pointer dereference in nsp_cs_config()
  • From: Li Tuo <islituo@xxxxxxxxx>
• Re: [PATCH] scsi: ufs: Allow async suspend/resume callbacks
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] lpfc: fix possible ABBA deadlock in nvmet_xri_aborted
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Fix typo in comments
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next] scsi: qla2xxx: Fix spelling mistakes "allloc" -> "alloc"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: bsg cleanup, part 2
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>