[PATCH 2/3] megaraid: rename megaraid_abort_and_reset() to __megaraid_abort()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



megaraid_abort_and_reset() now only tries to abort / complete a
single command, so rename it to __megaraid_abort() to signal the
change in functionality.

Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
 drivers/scsi/megaraid.c | 26 ++++++++------------------
 drivers/scsi/megaraid.h |  2 +-
 2 files changed, 9 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 10c1793d4b6d..b213ad62639d 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -1870,7 +1870,7 @@ megaraid_abort(struct scsi_cmnd *cmd)
 
 	adapter = (adapter_t *)cmd->device->host->hostdata;
 
-	rval =  megaraid_abort_and_reset(adapter, cmd, SCB_ABORT);
+	rval =  __megaraid_abort(adapter, cmd);
 
 	/*
 	 * This is required here to complete any completed requests
@@ -1949,22 +1949,20 @@ megaraid_reset(struct scsi_cmnd *cmd)
 }
 
 /**
- * megaraid_abort_and_reset()
+ * __megaraid_abort()
  * @adapter: megaraid soft state
  * @cmd: scsi command to be aborted or reset
- * @aor: abort or reset flag
  *
  * Try to locate the scsi command in the pending queue. If found and is not
  * issued to the controller, abort/reset it. Otherwise return failure
  */
 static int
-megaraid_abort_and_reset(adapter_t *adapter, struct scsi_cmnd *cmd, int aor)
+__megaraid_abort(adapter_t *adapter, struct scsi_cmnd *cmd)
 {
 	struct list_head	*pos, *next;
 	scb_t			*scb;
 
-	dev_warn(&adapter->dev->dev, "%s cmd=%x <c=%d t=%d l=%d>\n",
-	     (aor == SCB_ABORT)? "ABORTING":"RESET",
+	dev_warn(&adapter->dev->dev, "ABORTING cmd=%x <c=%d t=%d l=%d>\n",
 	     cmd->cmnd[0], cmd->device->channel,
 	     cmd->device->id, (u32)cmd->device->lun);
 
@@ -1977,7 +1975,7 @@ megaraid_abort_and_reset(adapter_t *adapter, struct scsi_cmnd *cmd, int aor)
 
 		if (scb->cmd == cmd) { /* Found command */
 
-			scb->state |= aor;
+			scb->state |= SCB_ABORT;
 
 			/*
 			 * Check if this command has firmware ownership. If
@@ -1988,8 +1986,7 @@ megaraid_abort_and_reset(adapter_t *adapter, struct scsi_cmnd *cmd, int aor)
 			if( scb->state & SCB_ISSUED ) {
 
 				dev_warn(&adapter->dev->dev,
-					"%s[%x], fw owner\n",
-					(aor==SCB_ABORT) ? "ABORTING":"RESET",
+					"ABORTING[%x], fw owner\n",
 					scb->idx);
 
 				return FAILED;
@@ -2001,18 +1998,11 @@ megaraid_abort_and_reset(adapter_t *adapter, struct scsi_cmnd *cmd, int aor)
 				 * list
 				 */
 				dev_warn(&adapter->dev->dev,
-					"%s-[%x], driver owner\n",
-					(aor==SCB_ABORT) ? "ABORTING":"RESET",
+					"ABORTING[%x], driver owner\n",
 					scb->idx);
 
 				mega_free_scb(adapter, scb);
-
-				if( aor == SCB_ABORT ) {
-					cmd->result = (DID_ABORT << 16);
-				}
-				else {
-					cmd->result = (DID_RESET << 16);
-				}
+				cmd->result = (DID_ABORT << 16);
 
 				list_add_tail(SCSI_LIST(cmd),
 						&adapter->completed_list);
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index cce23a086fbe..8188c7f90faf 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -953,7 +953,7 @@ static void mega_free_scb(adapter_t *, scb_t *);
 
 static int megaraid_abort(struct scsi_cmnd *);
 static int megaraid_reset(struct scsi_cmnd *);
-static int megaraid_abort_and_reset(adapter_t *, struct scsi_cmnd *, int);
+static int __megaraid_abort(adapter_t *, struct scsi_cmnd *);
 static int megaraid_biosparam(struct scsi_device *, struct block_device *,
 		sector_t, int []);
 
-- 
2.29.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux