From: Quinn Tran <qutran@xxxxxxxxxxx>
For target port that register itself as both FCP + NVME,
initiator driver will try to login one mode at a time. If the last
mode did not succeed, then driver will try the other mode.
When error is encountered, current code only flip to other mode
one time (NVME->FCP) and remain on the last mode. Driver wrongly
assumed target port does not support PRLI NVME, instead it was
not ready to receive PRLI.
This patch will alternate back and forth on every PRLI failure
until login retry count has depleted or it is succeeded.
Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_def.h | 9 ++++++--
drivers/scsi/qla2xxx/qla_gs.c | 8 +++++++
drivers/scsi/qla2xxx/qla_init.c | 41 ++++++++++++++-------------------
drivers/scsi/qla2xxx/qla_mbx.c | 3 +++
drivers/scsi/qla2xxx/qla_os.c | 5 ++++
5 files changed, 40 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index cb5bf2585cb7..be2eb75ee1a3 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2517,6 +2517,8 @@ typedef struct fc_port {
unsigned int n2n_flag:1;
unsigned int explicit_logout:1;
unsigned int prli_pend_timer:1;
+ unsigned int do_prli_nvme:1;
+
uint8_t nvme_flag;
uint8_t node_name[WWN_SIZE];
@@ -5351,9 +5353,12 @@ struct sff_8247_a0 {
#define NVME_FCP_TARGET(fcport) \
(FCP_TYPE(fcport) && NVME_TYPE(fcport)) \
+#define NVME_PRIORITY(ha, fcport) \
+ (NVME_FCP_TARGET(fcport) && \
+ (ha->fc4_type_priority == FC4_PRIORITY_NVME))
+
#define NVME_TARGET(ha, fcport) \
- ((NVME_FCP_TARGET(fcport) && \
- (ha->fc4_type_priority == FC4_PRIORITY_NVME)) || \
+ (fcport->do_prli_nvme || \
NVME_ONLY_TARGET(fcport)) \
#define PRLI_PHASE(_cls) \
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index df6e3ef52e2c..ebc8fdb0b43d 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -3504,6 +3504,14 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
fcport->last_rscn_gen = fcport->rscn_gen;
fcport->fc4_type = rp->fc4type;
found = true;
+
+ if (fcport->scan_needed) {
+ if (NVME_PRIORITY(vha->hw, fcport))
+ fcport->do_prli_nvme = 1;
+ else
+ fcport->do_prli_nvme = 0;
+ }
+
/*
* If device was not a fabric device before.
*/
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 255f3a8884db..1e4e3e83b5c7 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2000,6 +2000,7 @@ qla24xx_async_abort_command(srb_t *sp)
static void
qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
{
+ struct srb *sp;
WARN_ONCE(!qla2xxx_is_valid_mbs(ea->data[0]), "mbs: %#x\n",
ea->data[0]);
@@ -2027,22 +2028,27 @@ qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
break;
}
+ sp = ea->sp;
ql_dbg(ql_dbg_disc, vha, 0x2118,
- "%s %d %8phC priority %s, fc4type %x\n",
+ "%s %d %8phC priority %s, fc4type %x prev try %s\n",
__func__, __LINE__, ea->fcport->port_name,
vha->hw->fc4_type_priority == FC4_PRIORITY_FCP ?
- "FCP" : "NVMe", ea->fcport->fc4_type);
+ "FCP" : "NVMe", ea->fcport->fc4_type,
+ (sp->u.iocb_cmd.u.logio.flags & SRB_LOGIN_NVME_PRLI) ?
+ "NVME" : "FCP");
- if (N2N_TOPO(vha->hw)) {
- if (vha->hw->fc4_type_priority == FC4_PRIORITY_FCP) {
- ea->fcport->fc4_type &= ~FS_FC4TYPE_FCP;
- ea->fcport->fc4_type |= FS_FC4TYPE_NVME;
- } else {
- ea->fcport->fc4_type &= ~FS_FC4TYPE_NVME;
- ea->fcport->fc4_type |= FS_FC4TYPE_FCP;
- }
+ if (NVME_FCP_TARGET(ea->fcport)) {
+ if (sp->u.iocb_cmd.u.logio.flags & SRB_LOGIN_NVME_PRLI)
+ ea->fcport->do_prli_nvme = 0;
+ else
+ ea->fcport->do_prli_nvme = 1;
+ } else {
+ ea->fcport->do_prli_nvme = 0;
+ }
- if (ea->fcport->n2n_link_reset_cnt < 3) {
+ if (N2N_TOPO(vha->hw)) {
+ if (ea->fcport->n2n_link_reset_cnt <
+ vha->hw->login_retry_count) {
ea->fcport->n2n_link_reset_cnt++;
vha->relogin_jif = jiffies + 2 * HZ;
/*
@@ -2062,19 +2068,6 @@ qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
* switch connect. login failed. Take connection down
* and allow relogin to retrigger
*/
- if (NVME_FCP_TARGET(ea->fcport)) {
- ql_dbg(ql_dbg_disc, vha, 0x2118,
- "%s %d %8phC post %s prli\n",
- __func__, __LINE__,
- ea->fcport->port_name,
- (ea->fcport->fc4_type & FS_FC4TYPE_NVME)
- ? "NVMe" : "FCP");
- if (vha->hw->fc4_type_priority == FC4_PRIORITY_NVME)
- ea->fcport->fc4_type &= ~FS_FC4TYPE_NVME;
- else
- ea->fcport->fc4_type &= ~FS_FC4TYPE_FCP;
- }
-
ea->fcport->flags &= ~FCF_ASYNC_SENT;
ea->fcport->keep_nport_handle = 0;
ea->fcport->logout_on_delete = 1;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index fcc219172aa9..438af0d55135 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -4050,6 +4050,9 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
fcport->n2n_flag = 1;
fcport->keep_nport_handle = 1;
fcport->login_retry = vha->hw->login_retry_count;
+ fcport->fc4_type = FS_FC4TYPE_FCP;
+ if (vha->flags.nvme_enabled)
+ fcport->fc4_type |= FS_FC4TYPE_NVME;
if (wwn_to_u64(vha->port_name) >
wwn_to_u64(fcport->port_name)) {
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index bc8abe226fa6..064dbbeda0ee 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -5184,6 +5184,11 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e)
WWN_SIZE);
fcport->fc4_type = e->u.new_sess.fc4_type;
+ if (NVME_PRIORITY(vha->hw, fcport))
+ fcport->do_prli_nvme = 1;
+ else
+ fcport->do_prli_nvme = 0;
+
if (e->u.new_sess.fc4_type & FS_FCP_IS_N2N) {
fcport->dm_login_expire = jiffies +
QLA_N2N_WAIT_TIME * HZ;
--
2.23.1
