Linux on ARM based TI OMAP SoCs
[Prev Page][Next Page]
- Re: [PATCH V5 2/3] dt-bindings: Add Logic PD Type 28 display panel, (continued)
- [PATCH] davinci_cpdma: make cpdma_chan_split_pool static,
Ben Dooks (Codethink)
- [PATCH 05/25] crypto: omap - switch to skcipher API,
Ard Biesheuvel
- [PATCH 0/5] ARM: dts: omap4+: Add PRM nodes for reset support,
Tero Kristo
- omapdrm: dsi panels,
H. Nikolaus Schaller
- [PATCH 0/8] Improve PM for omap4 devices,
Tony Lindgren
- [PATCH] ARM: dts: Add minimal support for Droid Bionic xt875,
Tony Lindgren
- [PATCHv2 0/7] musb host improvments mostly for omap2430 glue,
Tony Lindgren
- [PATCH 0/5] cpcap battery simplification and calibrate support,
Tony Lindgren
- [PATCHv2 0/2] cpcap charger and battery changes to deal with dropped voltage,
Tony Lindgren
- [PATCHv2 0/2] cpcap charger and battery fixes,
Tony Lindgren
- [PATCH] power: supply: cpcap-charger: Limit voltage to 4.2V for battery,
Tony Lindgren
- [PATCH] ARM: dts: logicpd-torpedo: Disable Bluetooth Serial DMA,
Adam Ford
- [Patch 0/3] ARM: dts: dra7: add vpe nodes,
Benoit Parrot
- [PATCH AUTOSEL 5.3 04/68] clk: ti: dra7: Fix mcasp8 clock bits,
Sasha Levin
- [PATCH AUTOSEL 5.3 05/68] ARM: dts: Fix wrong clocks for dra7 mcasp,
Sasha Levin
- [PATCH AUTOSEL 5.3 14/68] ARM: dts: Fix gpio0 flags for am335x-icev2,
Sasha Levin
- [PATCH AUTOSEL 5.3 15/68] ARM: OMAP2+: Fix missing reset done flag for am3 and am43,
Sasha Levin
- [PATCH AUTOSEL 5.3 16/68] ARM: OMAP2+: Add missing LCDC midlemode for am335x,
Sasha Levin
- [PATCH AUTOSEL 5.3 17/68] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage(),
Sasha Levin
- [PATCH AUTOSEL 4.19 07/26] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage(),
Sasha Levin
- [PATCH AUTOSEL 4.19 11/26] ARM: dts: am4372: Set memory bandwidth limit for DISPC,
Sasha Levin
- [PATCH AUTOSEL 4.14 05/21] ARM: OMAP2+: Fix missing reset done flag for am3 and am43,
Sasha Levin
- [PATCH AUTOSEL 4.4 05/11] ARM: dts: am4372: Set memory bandwidth limit for DISPC,
Sasha Levin
- [PATCH AUTOSEL 4.4 04/11] ARM: OMAP2+: Fix missing reset done flag for am3 and am43,
Sasha Levin
- [PATCH AUTOSEL 4.9 04/13] ARM: OMAP2+: Fix missing reset done flag for am3 and am43,
Sasha Levin
- [PATCH AUTOSEL 4.9 05/13] ARM: dts: am4372: Set memory bandwidth limit for DISPC,
Sasha Levin
- [PATCH AUTOSEL 4.19 06/26] ARM: OMAP2+: Fix missing reset done flag for am3 and am43,
Sasha Levin
- [PATCH AUTOSEL 4.14 09/21] ARM: dts: am4372: Set memory bandwidth limit for DISPC,
Sasha Levin
- [PATCHv3] wlcore: clean-up clearing of WL1271_FLAG_IRQ_RUNNING,
Tony Lindgren
- [PATCH] ARM: dts: Use level interrupt for omap4 & 5 wlcore,
Tony Lindgren
- [PATCH] ARM: OMAP2+: pm33xx-core: make am43xx_get_rtc_base_addr static,
Ben Dooks
- [PATCH] ARM: OMAP2+: force iomem for omap_interconnect_sync,
Ben Dooks
- [PATCH 1/2] ARM: OMAP2+: make dra7xx_sha0_hwmod static,
Ben Dooks
- Re: [PATCHv2 7/7] drm/omap: hdmi4: fix use of uninitialized var,
Tony Lindgren
- [PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset),
Tero Kristo
- [PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances,
Tero Kristo
- [PATCHv8 2/9] soc: ti: add initial PRM driver with reset control support,
Tero Kristo
- [PATCHv8 3/9] soc: ti: omap-prm: poll for reset complete during de-assert,
Tero Kristo
- [PATCHv8 4/9] soc: ti: omap-prm: add support for denying idle for reset clockdomain,
Tero Kristo
- [PATCHv8 6/9] soc: ti: omap-prm: add data for am33xx,
Tero Kristo
- [PATCHv8 5/9] soc: ti: omap-prm: add omap4 PRM data,
Tero Kristo
- [PATCHv8 7/9] soc: ti: omap-prm: add dra7 PRM data,
Tero Kristo
- [PATCHv8 8/9] soc: ti: omap-prm: add am4 PRM data,
Tero Kristo
- [PATCHv8 9/9] soc: ti: omap-prm: add omap5 PRM data,
Tero Kristo
- Re: [PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset),
Tony Lindgren
- [PATCH 06/11] ARM: OMAP2+: do not export am43xx_control functions,
Ben Dooks
- [PATCH 07/11] ARM: OMAP2+: prm44xx: make prm_{save,restore}_context static,
Ben Dooks
- [PATCHv7 0/9] soc: ti: add OMAP PRM driver (for reset),
Tero Kristo
- [PATCH 1/2] configs: ARM: omap2plus: Enable OMAP3_THERMAL,
Adam Ford
- [PATCH] configs: omap2plus: Enable VIDEO_MT9P031 module,
Adam Ford
- [PATCHv2] wlcore: fix race for WL1271_FLAG_IRQ_RUNNING,
Tony Lindgren
- [PATCH 0/5] Fix SPI module alias for panels used by omapdrm,
Laurent Pinchart
- [PATCH] drm: panels: fix spi aliases of former omap panels,
Andreas Kemnade
- Re: [PATCH RFC] DT support for omap4-iss,
Tony Lindgren
- [PATCH] wlcore: fix race for WL1271_FLAG_IRQ_RUNNING,
Tony Lindgren
- [PATCH 0/3] bus: ti-sysc: fix reset sequencing,
Tero Kristo
- [PATCH 0/2] clk: ti: fix GFX clocks for reset support,
Tero Kristo
- [PATCH] regulator: pbias: Get rid of struct pbias_regulator_data,
Axel Lin
- [PATCH] ARM: dts: Set status to disable for MMC3,
Emmanuel Vadot
- [PATCH] serial: 8250_omap: Fix gpio check for auto RTS and CTS,
Adam Ford
- [PATCH 00/10] Stop NULLifying match pointer in of_match_device(),
Stephen Boyd
- Re: iss: camera interface omap5,
Tony Lindgren
- DM3730 Bluetooth Performance differences between SERIAL_8250_OMAP vs SERIAL_OMAP,
Adam Ford
- [PATCH] ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage,
Andrey Smirnov
- [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes,
Tony Lindgren
- [PATCHv2 0/4] Convert all btwilink users to hci_ll and drop btwilink,
Sebastian Reichel
- [GIT PULL] fixes for omaps for v5.4,
Tony Lindgren
- [PATCH v3 01/10] dt-bindings: sram: Convert SRAM bindings to json-schema,
Krzysztof Kozlowski
- [PATCH v3 02/10] dt-bindings: sram: Convert Samsung Exynos SYSRAM bindings to json-schema,
Krzysztof Kozlowski
- [PATCH v3 03/10] ARM: dts: exynos: Rename SysRAM node to "sram",
Krzysztof Kozlowski
- [PATCH v3 04/10] arm64: dts: tegra: Rename sysram node to "sram",
Krzysztof Kozlowski
- [PATCH v3 05/10] ARM: dts: dove: Rename "sa-sram" node to "sram",
Krzysztof Kozlowski
- [PATCH v3 06/10] ARM: dts: imx: Rename "iram" node to "sram",
Krzysztof Kozlowski
- [PATCH v3 07/10] ARM: dts: keystone: Rename "msmram" node to "sram",
Krzysztof Kozlowski
- [PATCH v3 08/10] ARM: dts: tegra: Rename "iram" node to "sram",
Krzysztof Kozlowski
- [PATCH v3 09/10] ARM: dts: am: Rename "ocmcram" node to "sram",
Krzysztof Kozlowski
- [PATCH v3 10/10] ARM: dts: omap: Rename "ocmcram" node to "sram",
Krzysztof Kozlowski
- Re: [PATCH v3 01/10] dt-bindings: sram: Convert SRAM bindings to json-schema,
Rob Herring
- [PATCH] ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize"),
Jonathan Neuschäfer
- [PATCH] drm/omap: fix max fclk divider for omap36xx,
Tomi Valkeinen
- [PATCH 0/4] clk: ti: re-work divider clock support,
Tero Kristo
- [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet,
Jeroen Hofstee
- [PATCH v2] clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call,
Peter Ujfalusi
- [PATCH V4 1/3] drm/panel: simple: Add Logic PD Type 28 display support,
Adam Ford
- [PATCH] Bluetooth: hci_ll: set operational frequency earlier,
Adam Ford
- [PATCH] clk: ti: clkctrl: Fix failed to enable error with double udelay timeout,
Tony Lindgren
- [PATCH] ARM: dts: am4372: Set memory bandwidth limit for DISPC,
Tomi Valkeinen
- [omap:droid4-pending-mdm-v5.3 1/16] include/linux/serdev-gsm.h:29:2: error: unknown type name 'atomic_t',
kbuild test robot
- [PATCH] clk/ti/adpll: allocate room for terminating null,
Stephen Kitt
- musb: cppi41: broken high speed FTDI functionality when connected to musb directly,
Yegor Yefremov
- [PATCH] clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call,
Peter Ujfalusi
- [PATCH] ARM: dts: omap3.dtsi: Fix AES and SHA Engines,
Adam Ford
- [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage(),
Tony Lindgren
- [PATCH] ARM: OMAP2+: Add missing LCDC midlemode for am335x,
Tony Lindgren
- [PATCH] ARM: OMAP2+: Fix missing reset done flag for am3 and am43,
Tony Lindgren
- [PATCH] ARM: dts: Fix gpio0 flags for am335x-icev2,
Tony Lindgren
- [PATCH 2/3] clk: let init callback return an error code,
Jerome Brunet
- [PATCH] MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE,
Adam Ford
- [PATCH V2 1/3] drm/panel: simple: Add Logic PD Type 28 display support,
Adam Ford
- [PATCH AUTOSEL 5.3 120/203] ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2,
Sasha Levin
- [PATCH AUTOSEL 5.2 109/185] ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2,
Sasha Levin
- [PATCH] ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules,
Tony Lindgren
- [PATCH v2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again,
H. Nikolaus Schaller
- [PATCH v2 linux-next 0/4] arm/arm64: configs: Convert all CONFIG_REMOTEPROC instances to y,
Keerthy
- remoteproc: don't allow modular build,
Keerthy
- [PATCH 0/2] dra7 mcasp clock warning fixes,
Tony Lindgren
- [GIT PULL] fixes for omaps for v5.4 merge window,
Tony Lindgren
- [PATCH v3 0/2] Update AM3/4 GPIO number as per datasheet,
Ankur Tyagi
- [PATCH 0/3] cpcap charger and battery changes to deal with dropped voltage,
Tony Lindgren
- [PATCH 0/3] cpcap charger and battery fixes,
Tony Lindgren
- OMAP Maintainers,
Adam Ford
- [PATCH 1/3] drm/panel: simple: Add Logic PD Type 28 display support,
Adam Ford
- [PATCH] ARM: dts: logicpd-torpedo-baseboard: Reduce video regulator chatter,
Adam Ford
- [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet,
Ankur Tyagi
- [omap:droid4-pending-mdm-v5.3 3/15] include/linux/mfd/motorola-mdm.h:60:53: warning: 'struct device' declared inside parameter list,
kbuild test robot
- [omap:droid4-pending-mdm-v5.3 3/15] include/linux/mfd/motorola-mdm.h:37:25: error: field 'gsm_dlci' has incomplete type,
kbuild test robot
- [omap:droid4-pending-mdm-v5.3 1/15] include/linux/serdev-gsm.h:29:2: error: unknown type name 'atomic_t',
kbuild test robot
- [omap:droid4-pending-mdm-v5.3 1/15] include/linux/serdev-gsm.h:62:33: error: implicit declaration of function 'to_serdev_device',
kbuild test robot
- [PATCH] usb: musb: Cancel delayed work on host controller rmmod,
Tony Lindgren
- [PATCH] phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling,
Tony Lindgren
- [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng,
Tony Lindgren
- [PATCH 1/7] ARM: OMAP2+: Check omap3-rom-rng for GP device instead of HS device,
Tony Lindgren
- [PATCH 5/7] hwrng: omap3-rom - Update to use standard driver data,
Tony Lindgren
- [PATCH 2/7] hwrng: omap3-rom - Fix missing clock by probing with device tree,
Tony Lindgren
- [PATCH 3/7] hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled,
Tony Lindgren
- [PATCH 4/7] hwrng: omap3-rom - Initialize default quality to get data,
Tony Lindgren
- [PATCH 6/7] hwrng: omap3-rom - Use runtime PM instead of custom functions,
Tony Lindgren
- [PATCH 7/7] hwrng: omap3-rom - Use devm hwrng and runtime PM,
Tony Lindgren
- Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng,
Tero Kristo
- Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng,
Sebastian Reichel
- Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng,
Aaro Koskinen
- Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng,
Herbert Xu
- [PATCH 0/6] Non-urgent fixes and improvments for omap3-rom-rng,
Tony Lindgren
- [RFC v2] ARM: dts: omap36xx: Enable thermal throttling,
Adam Ford
- [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family,
Adam Ford
- Re: [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family,
H. Nikolaus Schaller
[RFC 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family,
Adam Ford
[RFC] ARM: dts: omap36xx: Enable thermal throttling,
Adam Ford
[PATCHv3 00/10] clk: ti: remoteproc / iommu support patches,
Tero Kristo
- [PATCHv3 02/10] clk: ti: clkctrl: convert to use bit helper macros instead of bitops,
Tero Kristo
- [PATCHv3 03/10] clk: ti: clkctrl: add new exported API for checking standby info,
Tero Kristo
- [PATCHv3 01/10] clk: ti: clkctrl: fix setting up clkctrl clocks,
Tero Kristo
- [PATCHv3 04/10] dt-bindings: clk: add omap5 iva clkctrl definitions,
Tero Kristo
- [PATCHv3 06/10] clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks,
Tero Kristo
- [PATCHv3 07/10] clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks,
Tero Kristo
- [PATCHv3 05/10] clk: ti: omap5: add IVA subsystem clkctrl data,
Tero Kristo
- [PATCHv3 08/10] clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks,
Tero Kristo
- [PATCHv3 09/10] clk: ti: am43xx: drop idlest polling from pruss clkctrl clock,
Tero Kristo
- [PATCHv3 10/10] clk: ti: am33xx: drop idlest polling from pruss clkctrl clock,
Tero Kristo
- Re: [PATCHv3 00/10] clk: ti: remoteproc / iommu support patches,
Tero Kristo
[PATCHv5 00/10] soc: ti: add OMAP PRM driver (for reset),
Tero Kristo
- [PATCHv5 03/10] soc: ti: omap-prm: poll for reset complete during de-assert,
Tero Kristo
- [PATCHv5 04/10] soc: ti: omap-prm: add support for denying idle for reset clockdomain,
Tero Kristo
- [PATCHv5 01/10] dt-bindings: omap: add new binding for PRM instances,
Tero Kristo
- [PATCHv5 02/10] soc: ti: add initial PRM driver with reset control support,
Tero Kristo
- [PATCHv5 05/10] soc: ti: omap-prm: add omap4 PRM data,
Tero Kristo
- [PATCHv5 06/10] soc: ti: omap-prm: add data for am33xx,
Tero Kristo
- [PATCHv5 07/10] soc: ti: omap-prm: add dra7 PRM data,
Tero Kristo
- [PATCHv5 08/10] soc: ti: omap-prm: add am4 PRM data,
Tero Kristo
- [PATCHv5 09/10] soc: ti: omap-prm: add omap5 PRM data,
Tero Kristo
- [PATCHv5 10/10] ARM: OMAP2+: pdata-quirks: add PRM data for reset support,
Tero Kristo
- Re: [PATCHv5 00/10] soc: ti: add OMAP PRM driver (for reset),
Tony Lindgren
[PATCH 2/2] clk: ti: clk-33xx.c: Update GPIO number as per datasheet,
Ankur Tyagi
[PATCH] ARM: omap2plus_defconfig: Enable HW Crypto engine modules,
Adam Ford
[PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits,
H. Nikolaus Schaller
- [PATCH v3 3/8] DTS: bindings: omap: update bindings documentation,
H. Nikolaus Schaller
- [PATCH v3 7/8] cpufreq: ti-cpufreq: Add support for AM3517,
H. Nikolaus Schaller
- [PATCH v3 8/8] ARM: dts: Add OPP-V2 table for AM3517,
H. Nikolaus Schaller
- [PATCH v3 4/8] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517,
H. Nikolaus Schaller
- [PATCH v3 6/8] ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo,
H. Nikolaus Schaller
- [PATCH v3 5/8] cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode,
H. Nikolaus Schaller
- [PATCH v3 1/8] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx,
H. Nikolaus Schaller
- [PATCH v3 2/8] ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 for,
H. Nikolaus Schaller
- Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits,
Tony Lindgren
- Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits,
Viresh Kumar
- Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits,
Adam Ford
[PATCH] ARM: omap2plus_defconfig: Enable DRM_TI_TFP410,
Adam Ford
[PATCH 1/2] ARM: omap2plus_defconfig: Update for removed items,
Adam Ford
[Index of Archives]
[Linux USB Devel]
[Linux Media]
[Video for Linux]
[Big List of Linux Books]
[Linux WPAN Networking]
[Linux SCSI]
[Scanners]
[Yosemite Forum]
