Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- Re: [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: [PATCH v2] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH] arm: dts: Add am335x-boneblack-pps.dts
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- [PATCH v2] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: Reid Tonking <reidt@xxxxxx>
- Re: [PATCH] arm: dts: Add am335x-boneblack-pps.dts
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [PATCH] arm: dts: Add am335x-boneblack-pps.dts
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [RFC PATCH v6 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- [PATCH] arm: dts: Add am335x-boneblack-pps.dts
- From: Julien Panis <jpanis@xxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [RFC PATCH v6 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v2] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH v2] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [RFC PATCH v6 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- Re: [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: "Raghavendra, Vignesh" <vigneshr@xxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [EXTERNAL] Re: [RFC PATCH v6 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: Reid Tonking <reidt@xxxxxx>
- Re: [RFC PATCH v6 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: andy.shevchenko@xxxxxxxxx
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [RFC PATCH v6 1/2] dt-bindings: net: Add ICSSG Ethernet
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- [PATCH] i2c: omap: Fix standard mode false ACK readings
- From: Reid Tonking <reidt@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH] i2c: omap: Fix standard mode false ACK readings
- From: Reid Tonking <reidt@xxxxxx>
- Re: [PATCH] i2c: omap: Fix standard mode false ACK readings
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- [PATCH] i2c: omap: Fix standard mode false ACK readings
- From: Reid Tonking <reidt@xxxxxx>
- [RFC PATCH v6 1/2] dt-bindings: net: Add ICSSG Ethernet
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [RFC PATCH v6 0/2] Introduce ICSSG based ethernet Driver
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v2 02/13] ASoC: ti: use asoc_dummy_dlc
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH v2 00/13] ASoC: add and use asoc_dummy_dlc
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH] PCI: dra7xx: Fix missing unwind goto in 'dra7xx_pcie_probe'
- From: Huang Yuhao <u202212057@xxxxxxxxxxx>
- Re: [PATCH] arm64: defconfig: Enable PRUSS as module
- From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
- Re: [PATCH v5 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] serial: core: Disable uart_start() on uart_remove_one_port()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] arm64: defconfig: Enable PRUSS as module
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [PATCH] rtc: rtc-twl: add NVRAM support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] rtc: rtc-twl: add NVRAM support
- From: Ladislav Michl <oss-lists@xxxxxxxxx>
- [PATCH v2 1/1] serial: 8250: Reinit port->pm on port specific driver unbind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] rtc: rtc-twl: add NVRAM support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 03/11] ASoC: ti: use asoc_dummy_dlc
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [PATCH] clocksource/drivers/timer-ti-dm: Fix finding alwon timer
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v9 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v9 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v9 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v9 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v9 0/4] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v8 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: Motorola Droid 4 -- Stopping charger when battery is full
- From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
- [PATCH] rtc: rtc-twl: add NVRAM support
- From: Ladislav Michl <oss-lists@xxxxxxxxx>
- Re: [PATCH v4 8/9] iio: adc: palmas: add support for iio threshold events
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: Motorola Droid 4 -- Stopping charger when battery is full
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Motorola Droid 4 -- Stopping charger when battery is full
- From: Pavel Machek <pavel@xxxxxx>
- Re: Motorola Droid 4 -- Stopping charger when battery is full
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 0/9] iio: adc: palmas_gpadc: add iio events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/3] hwspinlock: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v8 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v8 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v8 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v8 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v8 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- [PATCH v8 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v8 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v8 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v8 0/4] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v8 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [PATCH] net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [EXTERNAL] Re: [PATCH v7 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix deferred probe warnings
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix deferred probe warnings
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix deferred probe warnings
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix deferred probe warnings
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH] drm/omap: dsi: Fix deferred probe warnings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] clocksource/drivers/timer-ti-dm: Fix finding alwon timer
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v7 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v7 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v7 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v7 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH] net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
- From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v7 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- [PATCH] net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v7 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v7 0/4] Introduce PRU platform consumer API
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v7 0/4] Introduce PRU platform consumer API
- From: Md Danish Anwar <a0501179@xxxxxx>
- [PATCH v4 9/9] iio: adc: palmas: don't alter event config on suspend/resume
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 8/9] iio: adc: palmas: add support for iio threshold events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 7/9] iio: adc: palmas: always reset events on unload
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 6/9] iio: adc: palmas: move eventX_enable into palmas_adc_event
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 5/9] iio: adc: palmas: use iio_event_direction for threshold polarity
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 4/9] iio: adc: palmas: replace "wakeup" with "event"
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 3/9] iio: adc: palmas: remove adc_wakeupX_data
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 2/9] iio: adc: palmas: Take probe fully device managed.
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 1/9] iio: adc: palmas_gpadc: fix NULL dereference on rmmod
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 0/9] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 3/7] iio: adc: palmas: use iio_event_direction for threshold polarity
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 2/7] iio: adc: palmas: replace "wakeup" with "event"
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- Re: [PATCH v3 6/7] iio: adc: palmas: add support for iio threshold events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- Re: [PATCH v3 7/7] iio: adc: palmas: don't alter event config on suspend/resume
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 6/7] iio: adc: palmas: add support for iio threshold events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v7 0/4] Introduce PRU platform consumer API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v7 0/4] Introduce PRU platform consumer API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] i2c: omap: Don't do pm_runtime_resume in .remove()
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- [PATCH v3 6/7] iio: adc: palmas: add support for iio threshold events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 7/7] iio: adc: palmas: don't alter event config on suspend/resume
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 5/7] iio: adc: palmas: always reset events on unload
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 2/7] iio: adc: palmas: replace "wakeup" with "event"
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 4/7] iio: adc: palmas: move eventX_enable into palmas_adc_event
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 3/7] iio: adc: palmas: use iio_event_direction for threshold polarity
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v6 2/2] MAINTAINERS: add board bindings list to OMAP2+ files
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v6 0/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH 00/10] usb: musb: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 07/10] usb: musb: omap2430: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v5 2/2] MAINTAINERS: add board bindings list to OMAP2+ files
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v5 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v5 0/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andrew Davis <afd@xxxxxx>
- [PATCH v4 2/2] MAINTAINERS: add board bindings list to OMAP2+ files
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v4 0/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v7 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v7 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v7 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v7 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v7 0/4] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [PATCH] ASoC: ti: omap-dmic: use devm_platform_ioremap_resource_byname()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] ASoC: ti: omap-mcpdm: use devm_platform_ioremap_resource_byname()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 0/3] p54spi devicetree conversion
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v12 1/5] dt-bindings: PCI: ti,j721e-pci-*: add checks for num-lanes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v6 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v6 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] i2c: omap: Don't do pm_runtime_resume in .remove()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Don't do pm_runtime_resume in .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Don't do pm_runtime_resume in .remove()
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- [PATCH v2 6/7] iio: adc: palmas: add support for iio threshold events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 0/7] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 4/7] iio: adc: palmas: move eventX_enable into palmas_adc_event
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 7/7] iio: adc: palmas: don't alter event config on suspend/resume
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 5/7] iio: adc: palmas: always reset events on unload
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 2/7] iio: adc: palmas: replace "wakeup" with "event"
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 3/7] iio: adc: palmas: use iio_event_direction for threshold polarity
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH] i2c: omap: Don't do pm_runtime_resume in .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v6 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- [PATCH v12 0/5] PCI: add 4x lane support for pci-j721e controllers
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v12 3/5] PCI: j721e: Add PCIe 4x lane selection support
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v12 1/5] dt-bindings: PCI: ti,j721e-pci-*: add checks for num-lanes
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v12 5/5] PCI: j721e: add j784s4 PCIe configuration
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v12 4/5] dt-bindings: PCI: ti,j721e-pci-*: add j784s4-pci-* compatible strings
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v12 2/5] PCI: j721e: Add per platform maximum lane settings
- From: Achal Verma <a-verma1@xxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- [PATCH v6 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v6 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v6 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v6 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v6 0/4] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] thermal: Use of_property_present() for testing DT property presence
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH] thermal: Use of_property_present() for testing DT property presence
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Max Georgiev <glipus@xxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Max Georgiev <glipus@xxxxxxxxx>
- Re: [PATCH] thermal: Use of_property_present() for testing DT property presence
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [GIT PULL] Clean-up for omap1 for v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] Devicetree overlays for omaps for v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] Devicetree changes for omaps for v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] Driver clean-up for ti-sysc for v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] Clean-up for omaps for v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH] mfd: omap-usb-tll: remove unused usbtll_readb function
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH] mfd: twl-core: remove unused add_child and add_numbered_child functions
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 5/5] soc: ti: pruss: Add helper functions to get/set PRUSS_CFG_GPMUX
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 1/5] soc: ti: pruss: Add pruss_get()/put() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 5/5] soc: ti: pruss: Add helper functions to get/set PRUSS_CFG_GPMUX
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 1/5] soc: ti: pruss: Add pruss_get()/put() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 27/30] clk: ti: Convert to platform remove callback returning void
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 5/5] soc: ti: pruss: Add helper functions to get/set PRUSS_CFG_GPMUX
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v2] drivers/gpio : Remove redundant platform_set_drvdata().
- From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
- Re: [RFC 1/2] ARM: dts: omap: Drop ti,omap36xx compatible
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC 1/2] ARM: dts: omap: Drop ti,omap36xx compatible
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC 1/2] ARM: dts: omap: Drop ti,omap36xx compatible
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP2+: hwmod: Use kzalloc for allocating only one element
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH linux-next] ARM: OMAP2+: Remove the unneeded result variable
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 1/5] soc: ti: pruss: Add pruss_get()/put() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: fix repeated words in comments
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] arm: omap2: remove obsolete config OMAP3_SDRC_AC_TIMING
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC 1/2] ARM: dts: omap: Drop ti,omap36xx compatible
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] Remove unused declarations from arm
- From: cuigaosheng <cuigaosheng1@xxxxxxxxxx>
- Re: [PATCH v5 5/5] soc: ti: pruss: Add helper functions to get/set PRUSS_CFG_GPMUX
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v5 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v5 1/5] soc: ti: pruss: Add pruss_get()/put() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [RFC 1/2] ARM: dts: omap: Drop ti,omap36xx compatible
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] thermal: Use of_property_present() for testing DT property presence
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH] clk: ti: Use of_address_to_resource()
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap4: add initial support for Epson Moverio BT-200
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap4: add initial support for Epson Moverio BT-200
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/8] ARM: dts: am335x-phycore-som: Add alias for TPS65910 RTC
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap3-gta04: fix compatible record for GTA04 board
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: gta04: fix excess dma channel usage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 0/3] AM57x EVM Device Tree Overlays
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] Remove unused declarations from arm
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: omap: Use of_address_to_resource()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: omap2: Use of_property_read_bool() for boolean properties
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH -next] bus: ti-sysc: Use list_for_each_entry() helper
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] bus: ti-sysc: Fix double word in comments
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] drivers/bus: fix repeated words in comments
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] bus: ti-sysc: Fix comment typo
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] bus: ti-sysc: Use of_property_present() for testing DT property presence
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] clk: ti: Use of_address_to_resource()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] clk: ti: Use of_address_to_resource()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] bus: ti-sysc: Remove open coded "ranges" parsing
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH linux-next] ARM: omap1: remove redundant variables err
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
- Re: [PATCH v5 0/5] Introduce PRU platform consumer API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH -next] mmc: omap: Use devm_platform_get_and_ioremap_resource()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v5 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH] pinctrl: Use of_property_present() for testing DT property presence
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: am335x: performnce issues with FTDI and LOW_LATENCY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v5 0/5] Introduce PRU platform consumer API
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v5 5/5] soc: ti: pruss: Add helper functions to get/set PRUSS_CFG_GPMUX
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v5 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v5 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v5 1/5] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v5 0/5] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [PATCH v8 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v8 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- [PATCH] mfd: omap-usb-tll: remove unused usbtll_readb function
- From: Tom Rix <trix@xxxxxxxxxx>
- [PATCH] mfd: twl-core: remove unused add_child and add_numbered_child functions
- From: Tom Rix <trix@xxxxxxxxxx>
- [PATCH v8 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ASoC: ti: omap-mcpdm: use devm_platform_ioremap_resource_byname()
- From: <ye.xingchen@xxxxxxxxxx>
- [PATCH] ASoC: ti: omap-dmic: use devm_platform_ioremap_resource_byname()
- From: <ye.xingchen@xxxxxxxxxx>
- [PATCH 00/15] PCI: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 05/15] PCI: cadence/j721e: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- d4: Usable with some caveats
- From: Pavel Machek <pavel@xxxxxx>
- Re: (subset) [PATCH 000/173] ALSA/ASoC: Convert to platform remove callback returning void
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v5 0/2] Introduce ICSSG based ethernet Driver
- From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] pinctrl: Use of_property_present() for testing DT property presence
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] PCI: cadence: Move 28 bit mask CPU addr fixup ops from platform device to J721E platform
- From: Bartosz Wawrzyniak <bwawrzyn@xxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Andrew Davis <afd@xxxxxx>
- Re: [PATCH v3 07/51] cpuidle,psci: Push RCU-idle into driver
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH v2] drivers/gpio : Remove redundant platform_set_drvdata().
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2] drivers/gpio : Remove redundant platform_set_drvdata().
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 00/51] video: fbdev: Convert to platform remove callback returning void
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH] arm: omap2: remove obsolete config OMAP3_SDRC_AC_TIMING
- From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
- Re: [PATCH] pinctrl: Use of_property_present() for testing DT property presence
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH 00/51] video: fbdev: Convert to platform remove callback returning void
- From: Helge Deller <deller@xxxxxx>
- Re: [PATCH v2] drivers/gpio : Remove redundant platform_set_drvdata().
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 00/51] video: fbdev: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] pinctrl: Use of_property_present() for testing DT property presence
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 12/15] auxdisplay: ht16k33: Introduce backlight_get_brightness()
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- Re: [PATCH 00/51] video: fbdev: Convert to platform remove callback returning void
- From: Helge Deller <deller@xxxxxx>
- Re: [PATCH v2] drivers/gpio : Remove redundant platform_set_drvdata().
- From: Serge Semin <fancer.lancer@xxxxxxxxx>
- Re: [PATCH v2] drivers/gpio : Remove redundant platform_set_drvdata().
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- [PATCH] clk: ti: Use of_address_to_resource()
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] ARM: omap: Use of_address_to_resource()
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 12/15] auxdisplay: ht16k33: Introduce backlight_get_brightness()
- From: Stephen Kitt <steve@xxxxxxx>
- Re: [PATCH v2] drivers/gpio : Remove redundant platform_set_drvdata().
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- [PATCH v2] drivers/gpio : Remove redundant platform_set_drvdata().
- From: Lizhe <sensor1010@xxxxxxx>
- Re: [PATCH v11 1/5] dt-bindings: PCI: ti,j721e-pci-*: add checks for num-lanes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 00/51] video: fbdev: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 30/51] video: fbdev: omapfb: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 8/9] thermal/drivers/ti-soc: remove redundant msg in ti_thermal_expose_sensor()
- From: Yangtao Li <frank.li@xxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- Re: [PATCH] p54spi: convert to devicetree
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Max Georgiev <glipus@xxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- [PATCH v11 5/5] PCI: j721e: add j784s4 PCIe configuration
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v11 0/5] PCI: add 4x lane support for pci-j721e controllers
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v11 2/5] PCI: j721e: Add per platform maximum lane settings
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v11 1/5] dt-bindings: PCI: ti,j721e-pci-*: add checks for num-lanes
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v11 3/5] PCI: j721e: Add PCIe 4x lane selection support
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v11 4/5] dt-bindings: PCI: ti,j721e-pci-*: add j784s4-pci-* compatible strings
- From: Achal Verma <a-verma1@xxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v3] PCI: cadence: Clear the ARI Capability Next Function Number of the last function
- From: "Verma, Achal" <a-verma1@xxxxxx>
- Re: [PATCH v3] PCI: cadence: Clear the ARI Capability Next Function Number of the last function
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v2] net: Use of_property_read_bool() for boolean properties
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: [PATCH v2] net: Use of_property_read_bool() for boolean properties
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v10 1/5] dt-bindings: PCI: ti, j721e-pci-*: add checks for num-lanes
- From: "Verma, Achal" <a-verma1@xxxxxx>
- Re: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v4 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v10 1/5] dt-bindings: PCI: ti,j721e-pci-*: add checks for num-lanes
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH 000/173] ALSA/ASoC: Convert to platform remove callback returning void
- From: Takashi Iwai <tiwai@xxxxxxx>
- [PATCH v10 1/5] dt-bindings: PCI: ti,j721e-pci-*: add checks for num-lanes
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v10 2/5] PCI: j721e: Add per platform maximum lane settings
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v10 5/5] PCI: j721e: add j784s4 PCIe configuration
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v10 4/5] dt-bindings: PCI: ti,j721e-pci-*: add j784s4-pci-* compatible strings
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v10 3/5] PCI: j721e: Add PCIe 4x lane selection support
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v10 0/5] PCI: add 4x lane support for pci-j721e controllers
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v3] PCI: cadence: Clear the ARI Capability Next Function Number of the last function
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v3] PCI: cadence: Clear the ARI Capability Next Function Number of the last function
- From: Achal Verma <a-verma1@xxxxxx>
- Re: (subset) [PATCH 00/30] clk: Convert to platform remove callback returning void
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v2] leds: Mark GPIO LED trigger broken
- From: Lee Jones <lee@xxxxxxxxxx>
- [PATCH 165/173] ASoC: ti: omap-mcbsp: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 164/173] ASoC: ti: omap-hdmi: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 000/173] ALSA/ASoC: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v4 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH 7/9] regulator: rpi-panel-attiny: Drop of_match_ptr for ID table
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH] net: Use of_property_read_bool() for boolean properties
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- Re: [PATCH] p54spi: convert to devicetree
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] p54spi: convert to devicetree
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [PATCH] p54spi: convert to devicetree
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH -next] mmc: omap: Use devm_platform_get_and_ioremap_resource()
- From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] p54spi: convert to devicetree
- From: Kalle Valo <kvalo@xxxxxxxxxx>
- Re: [PATCH] p54spi: convert to devicetree
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- [PATCH v2] leds: Mark GPIO LED trigger broken
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] leds: Delete GPIO LED trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] leds: Delete GPIO LED trigger
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH] p54spi: convert to devicetree
- From: Christian Lamparter <chunkeey@xxxxxxxxx>
- Re: [PATCH] pinctrl: Use of_property_present() for testing DT property presence
- From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
- Re: [PATCH] p54spi: convert to devicetree
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2] net: Use of_property_read_bool() for boolean properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] net: Use of_property_read_bool() for boolean properties
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 2/3] hwspinlock: omap: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 1/3] hwspinlock: omap: Emit only one error message for errors in .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 0/3] hwspinlock: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] fbdev: omapfb: remove omap1 osk driver
- From: Helge Deller <deller@xxxxxx>
- Re: [PATCH] p54spi: convert to devicetree
- From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
- [PATCH] p54spi: convert to devicetree
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- [PATCH] fbdev: omapfb: remove omap1 osk driver
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- Re: [PATCH v7 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- Re: [PATCH v7 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v7 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- [PATCH] leds: Delete GPIO LED trigger
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- [PATCH] ARM: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH v7 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH] net: Use of_property_read_bool() for boolean properties
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: (subset) [PATCH 1/9] regulator: lp872x: Mark OF related data as maybe unused
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 1/5] soc: ti: pruss: Add pruss_get()/put() API
- From: Andrew Davis <afd@xxxxxx>
- Re: [PATCH 1/9] regulator: lp872x: Mark OF related data as maybe unused
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v8 01/29] thermal/core: Add a generic thermal_zone_get_trip() function
- From: Ido Schimmel <idosch@xxxxxxxxxx>
- [PATCH v4 5/5] soc: ti: pruss: Add helper functions to get/set PRUSS_CFG_GPMUX
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v4 4/5] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v4 2/5] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v4 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v4 1/5] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v4 0/5] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH] ARM: dts: omap4: add initial support for Epson Moverio BT-200
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] pinctrl: Use of_property_present() for testing DT property presence
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v8 01/29] thermal/core: Add a generic thermal_zone_get_trip() function
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH] pinctrl: Use of_property_present() for testing DT property presence
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH] net: Use of_property_read_bool() for boolean properties
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
- Re: [PATCH] pinctrl: Use of_property_present() for testing DT property presence
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 4/9] regulator: mt6397-regulator: Mark OF related data as maybe unused
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH] pinctrl: Use of_property_present() for testing DT property presence
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: am335x: performnce issues with FTDI and LOW_LATENCY
- From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
- Re: [PATCH] net: Use of_property_read_bool() for boolean properties
- From: Kalle Valo <kvalo@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] thermal: Use of_property_present() for testing DT property presence
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH] hwspinlock: omap: drop of_match_ptr for ID table
- From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap: align UART node name with bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 00/30] clk: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 27/30] clk: ti: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v8 01/29] thermal/core: Add a generic thermal_zone_get_trip() function
- From: Ido Schimmel <idosch@xxxxxxxxxx>
- Re: [PATCH] net: Use of_property_read_bool() for boolean properties
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 2/9] regulator: max20086: Mark OF related data as maybe unused
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/9] regulator: max20086: Mark OF related data as maybe unused
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] regulator: Use of_property_read_bool() for boolean properties
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] fbdev: Use of_property_present() for testing DT property presence
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] fbdev: Use of_property_present() for testing DT property presence
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH] net: Use of_property_read_bool() for boolean properties
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- [PATCH] hwspinlock: omap: drop of_match_ptr for ID table
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH] regulator: tps65219: fix matching interrupts for their regulators
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] fbdev: Use of_property_present() for testing DT property presence
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 00/17] Mass convert GPIO IRQ chips to be immutable
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: am335x: performnce issues with FTDI and LOW_LATENCY
- From: Bin Liu <b-liu@xxxxxx>
- [PATCH 8/9] regulator: twl: Drop of_match_ptr for ID table
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 2/9] regulator: max20086: Mark OF related data as maybe unused
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 6/9] regulator: pbias: Drop of_match_ptr for ID table
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 5/9] regulator: qcom_rpm: Drop of_match_ptr for ID table
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 1/9] regulator: lp872x: Mark OF related data as maybe unused
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 7/9] regulator: rpi-panel-attiny: Drop of_match_ptr for ID table
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 3/9] regulator: mp8859: Mark OF related data as maybe unused
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 9/9] regulator: twl6030: Drop of_match_ptr for ID table
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 4/9] regulator: mt6397-regulator: Mark OF related data as maybe unused
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Michael Walle <michael@xxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v3 00/17] Mass convert GPIO IRQ chips to be immutable
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH] mmc: Use of_property_read_bool() for boolean properties
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Richard Cochran <richardcochran@xxxxxxxxx>
- [PATCH] regulator: Use of_property_read_bool() for boolean properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Willem de Bruijn <willemdebruijn.kernel@xxxxxxxxx>
- [PATCH] net: Use of_property_read_bool() for boolean properties
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] mmc: Use of_property_read_bool() for boolean properties
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] thermal: Use of_property_present() for testing DT property presence
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] pinctrl: Use of_property_present() for testing DT property presence
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] bus: ti-sysc: Use of_property_present() for testing DT property presence
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] usb: Use of_property_present() for testing DT property presence
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] fbdev: Use of_property_present() for testing DT property presence
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] ARM: omap2: Use of_property_read_bool() for boolean properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH v6 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Michael Walle <michael@xxxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Michael Walle <michael@xxxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH] ASoC: do not include pm_runtime.h if not used
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
- Re: [PATCH] ASoC: do not include pm_runtime.h if not used
- From: <Claudiu.Beznea@xxxxxxxxxxxxx>
- Re: [PATCH v3 11/17] gpio: msc313: Convert to immutable irq_chip
- From: Romain Perier <romain.perier@xxxxxxxxx>
- Re: [PATCH] ASoC: do not include pm_runtime.h if not used
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH v6 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v6 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v6 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 1/2] dt-bindings: net: Add ICSSG Ethernet
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v6 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 1/2] dt-bindings: net: Add ICSSG Ethernet
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v3 5/6] soc: ti: pruss: Add helper function to enable OCP master ports
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- [PATCH v6 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v3 17/17] gpio: pcie-idio-24: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 15/17] gpio: omap: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 16/17] gpio: pci-idio-16: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 14/17] gpio: omap: Drop irq_base
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 13/17] gpio: max732x: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 12/17] gpio: mlxbf2: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 11/17] gpio: msc313: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 10/17] gpio: idt3243x: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 09/17] gpio: hlwd: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 08/17] gpio: hisi: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 07/17] gpio: cadence: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 05/17] gpio: aspeed-sgpio: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 06/17] gpio: ath79: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 04/17] gpio: aspeed: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 02/17] gpio: adnp: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 03/17] gpio: aspeed: Always register the irqchip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 01/17] gpio: altera: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 00/17] Mass convert GPIO IRQ chips to be immutable
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: am335x: performnce issues with FTDI and LOW_LATENCY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Motorola Droid 4 -- Stopping charger when battery is full
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 5/6] soc: ti: pruss: Add helper function to enable OCP master ports
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH v3 2/5] net: Expose available time stamping layers to user space.
- From: Vladimir Oltean <olteanv@xxxxxxxxx>
- Re: [PATCH v2 03/16] gpio: aspeed: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 18/18] mfd: twl6040: remove MODULE_LICENSE in non-modules
- From: Nick Alcock <nick.alcock@xxxxxxxxxx>
- [PATCH 16/18] mfd: omap-usb-tll: remove MODULE_LICENSE in non-modules
- From: Nick Alcock <nick.alcock@xxxxxxxxxx>
- [PATCH 17/18] mfd: twl4030-audio: remove MODULE_LICENSE in non-modules
- From: Nick Alcock <nick.alcock@xxxxxxxxxx>
- [PATCH 15/18] mfd: omap-usb-host: remove MODULE_LICENSE in non-modules
- From: Nick Alcock <nick.alcock@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 0/8] ARM: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- RE: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Willem de Bruijn <willemdebruijn.kernel@xxxxxxxxx>
- Re: [PATCH 0/8] ARM: Convert to platform remove callback returning void
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [PATCH 26/27] mfd: remove MODULE_LICENSE in non-modules
- From: Lee Jones <lee@xxxxxxxxxx>
- [PATCH v3 5/5] dt-bindings: net: phy: add timestamp preferred choice property
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- [PATCH v3 4/5] net: fix up drivers WRT phy time stamping
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- [PATCH v3 2/5] net: Expose available time stamping layers to user space.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- [PATCH v3 1/5] net: ethtool: Refactor identical get_ts_info implementations.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- [PATCH v3 0/5] net: Make MAC/PHY time stamping selectable
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH v2 03/16] gpio: aspeed: Convert to immutable irq_chip
- From: Marc Zyngier <maz@xxxxxxxxxx>
- Re: [PATCH 26/27] mfd: remove MODULE_LICENSE in non-modules
- From: Nick Alcock <nick.alcock@xxxxxxxxxx>
- Re: [PATCH 26/27] mfd: remove MODULE_LICENSE in non-modules
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH 26/27] mfd: remove MODULE_LICENSE in non-modules
- From: Nick Alcock <nick.alcock@xxxxxxxxxx>
- Re: [PATCH 26/27] mfd: remove MODULE_LICENSE in non-modules
- From: Nick Alcock <nick.alcock@xxxxxxxxxx>
- Re: [PATCH v2 03/16] gpio: aspeed: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v3 4/6] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v3 4/6] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [EXTERNAL] Re: [PATCH v3 5/6] soc: ti: pruss: Add helper function to enable OCP master ports
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v3 4/6] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v3 5/6] soc: ti: pruss: Add helper function to enable OCP master ports
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v3 5/6] soc: ti: pruss: Add helper function to enable OCP master ports
- From: Md Danish Anwar <a0501179@xxxxxx>
- [PATCH 0/8] ARM: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 5/8] ARM: omap1: omap-dma: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v3 4/6] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v3 6/6] soc: ti: pruss: Add helper functions to get/set PRUSS_CFG_GPMUX
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v3 5/6] soc: ti: pruss: Add helper function to enable OCP master ports
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v3 4/6] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v3 2/6] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v3 1/6] soc: ti: pruss: Add pruss_get()/put() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v2 03/16] gpio: aspeed: Convert to immutable irq_chip
- From: Joel Stanley <joel@xxxxxxxxx>
- [PATCH 6.1 304/885] regulator: tps65219: use IS_ERR() to detect an error pointer
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 6.2 0372/1001] regulator: tps65219: use IS_ERR() to detect an error pointer
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 07/51] cpuidle,psci: Push RCU-idle into driver
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v4 0/3] AM57x EVM Device Tree Overlays
- From: Andrew Davis <afd@xxxxxx>
- [PATCH v4 3/3] ARM: dts: am57xx-idk: Add IDK displays and touchscreens
- From: Andrew Davis <afd@xxxxxx>
- [PATCH v4 1/3] ARM: dts: ti: Add AM57xx GP EVM board support
- From: Andrew Davis <afd@xxxxxx>
- [PATCH v4 2/3] ARM: dts: ti: Add AM57xx GP EVM Rev A3 board support
- From: Andrew Davis <afd@xxxxxx>
- Re: [PATCH v1 06/11] thermal/drivers/ti: Use fixed update interval
- From: "Gole, Dhruva" <d-gole@xxxxxx>
- Re: Motorola Droid 4 -- Stopping charger when battery is full
- From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
- Re: [PATCH v1 06/11] thermal/drivers/ti: Use fixed update interval
- From: "J, KEERTHY" <j-keerthy@xxxxxx>
- [PATCH v1 06/11] thermal/drivers/ti: Use fixed update interval
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- [PATCH v2 16/16] gpio: pcie-idio-24: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 15/16] gpio: pci-idio-16: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 14/16] gpio: omap: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 03/16] gpio: aspeed: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 09/16] gpio: idt3243x: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 13/16] gpio: omap: Drop irq_base
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 11/16] gpio: mlxbf2: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 12/16] gpio: max732x: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 05/16] gpio: ath79: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 10/16] gpio: msc313: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 04/16] gpio: aspeed-sgpio: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 07/16] gpio: hisi: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 08/16] gpio: hlwd: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 06/16] gpio: cadence: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 02/16] gpio: adnp: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 01/16] gpio: altera: Convert to immutable irq_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 00/16] Mass convert GPIO IRQ chips to be immutable
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Motorola Droid 4 -- Stopping charger when battery is full
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH] ASoC: do not include pm_runtime.h if not used
- From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
- Re: mmc: core: Disable card detect during shutdown
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH] ASoC: do not include pm_runtime.h if not used
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- Re: am335x: performnce issues with FTDI and LOW_LATENCY
- From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 1/2] dt-bindings: net: Add ICSSG Ethernet
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 0/2] Introduce ICSSG based ethernet Driver
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 1/2] dt-bindings: net: Add ICSSG Ethernet
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v3 0/6] Introduce PRU platform consumer API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v2 3/4] net: Let the active time stamping layer be selectable.
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- [PATCH v3 5/6] soc: ti: pruss: Add helper function to enable OCP master ports
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v3 6/6] soc: ti: pruss: Add helper functions to get/set PRUSS_CFG_GPMUX
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v3 1/6] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v3 3/6] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v3 4/6] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v3 0/6] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v3 2/6] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: am335x: performnce issues with FTDI and LOW_LATENCY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 15/17] gpio: omap: Convert to immutable irq_chip
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 15/17] gpio: omap: Convert to immutable irq_chip
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v5 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 3/4] net: Let the active time stamping layer be selectable.
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v2 3/4] net: Let the active time stamping layer be selectable.
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/4] net: Let the active time stamping layer be selectable.
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v2 3/4] net: Let the active time stamping layer be selectable.
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v2 3/4] net: Let the active time stamping layer be selectable.
- From: kernel test robot <lkp@xxxxxxxxx>
- RE: [PATCH v2 3/4] net: Let the active time stamping layer be selectable.
- From: Willem de Bruijn <willemdebruijn.kernel@xxxxxxxxx>
- RE: [PATCH v2 2/4] net: Expose available time stamping layers to user space.
- From: Willem de Bruijn <willemdebruijn.kernel@xxxxxxxxx>
- Re: [PATCH v2 2/4] net: Expose available time stamping layers to user space.
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: mmc: core: Disable card detect during shutdown
- From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
- Re: [PATCH v5 00/18] Self-encapsulate the thermal zone device structure
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH v2 3/4] net: Let the active time stamping layer be selectable.
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 2/4] net: Expose available time stamping layers to user space.
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 0/4] Up until now, there was no way to let the user select the layer at which time stamping occurs. The stack assumed that PHY time stamping is always preferred, but some MAC/PHY combinations were buggy.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- [PATCH v2 4/4] net: fix up drivers WRT phy time stamping
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]