Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- Re: [PATCH] Input: ads7846 - Fix usage of match data
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] Input: ads7846 - Fix usage of match data
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v4 1/4] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] Input: ads7846 - Fix usage of match data
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 00/15] PCI: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v4 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v4 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: jerome Neanne <jneanne@xxxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH] remoteproc: pru: add support for configuring GPMUX based on client setup
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH 02/30] backlight/gpio_backlight: Compare against struct fb_info.device
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- Re: [PATCH 02/30] backlight/gpio_backlight: Compare against struct fb_info.device
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 18/30] fbdev/radeonfb: Use hardware device as backlight parent
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- Re: [PATCH 02/30] backlight/gpio_backlight: Compare against struct fb_info.device
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- Re: [PATCH 18/30] fbdev/radeonfb: Use hardware device as backlight parent
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 11/30] fbdev/ep93xx-fb: Do not assign to struct fb_info.dev
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 30/30] fbdev: Make support for userspace interfaces configurable
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 28/30] fbdev/core: Move file-I/O code into separate file
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] remoteproc: pru: add support for configuring GPMUX based on client setup
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH 02/30] backlight/gpio_backlight: Compare against struct fb_info.device
- From: "Ruhl, Michael J" <michael.j.ruhl@xxxxxxxxx>
- Re: [PATCH 02/30] backlight/gpio_backlight: Compare against struct fb_info.device
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- RE: [PATCH 02/30] backlight/gpio_backlight: Compare against struct fb_info.device
- From: "Ruhl, Michael J" <michael.j.ruhl@xxxxxxxxx>
- Re: [PATCH v4 1/4] Input: ads7846 - Convert to use software nodes
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] remoteproc: pru: add support for configuring GPMUX based on client setup
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH 30/30] fbdev: Make support for userspace interfaces configurable
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 28/30] fbdev/core: Move file-I/O code into separate file
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 30/30] fbdev: Make support for userspace interfaces configurable
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 29/30] fbdev/core: Rework fb init code
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 26/30] fbdev/core: Add fb_device_{create,destroy}()
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 27/30] fbdev/core: Move procfs code to separate file
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 25/30] fbdev/core: Move framebuffer and backlight helpers into separate files
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 24/30] fbdev/core: Pass Linux device to pm_vt_switch_*() functions
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 21/30] fbdev/sm501fb: Output message with fb_err()
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 23/30] fbdev/tdfxfb: Set i2c adapter parent to hardware device
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 22/30] fbdev/smscufx: Detect registered fb_info from refcount
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 20/30] fbdev/rivafb: Use hardware device as backlight parent
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 19/30] fbdev/rivafb: Reorder backlight and framebuffer init/cleanup
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 18/30] fbdev/radeonfb: Use hardware device as backlight parent
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 17/30] fbdev/radeonfb: Reorder backlight and framebuffer cleanup
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 16/30] fbdev/pxa168fb: Do not assign to struct fb_info.dev
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 15/30] fbdev/nvidiafb: Use hardware device as backlight parent
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 11/30] fbdev/ep93xx-fb: Do not assign to struct fb_info.dev
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 14/30] fbdev/nvidiafb: Reorder backlight and framebuffer init/cleanup
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 13/30] fbdev/metronomefb: Use hardware device for dev_err()
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 12/30] fbdev/mb862xxfb: Output messages with fb_dbg() and fb_err()
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 09/30] fbdev/ep93xx-fb: Alloc DMA memory from hardware device
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 10/30] fbdev/ep93xx-fb: Output messages with fb_info() and fb_err()
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 08/30] fbdev/broadsheetfb: Call device_remove_file() with hardware device
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 05/30] fbdev/atyfb: Use hardware device as backlight parent
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 06/30] fbdev/aty128fb: Reorder backlight and framebuffer init/cleanup
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 07/30] fbdev/aty128fb: Use hardware device as backlight parent
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 00/30] fbdev: Make userspace interfaces optional
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 03/30] backlight/lv5207lp: Compare against struct fb_info.device
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 04/30] fbdev/atyfb: Reorder backlight and framebuffer init/cleanup
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 02/30] backlight/gpio_backlight: Compare against struct fb_info.device
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- [PATCH 01/30] backlight/bd6107: Compare against struct fb_info.device
- From: Thomas Zimmermann <tzimmermann@xxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- [PATCH v6 1/1] dt-bindings: pinctrl: Update pinctrl-single to use yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v5 1/1] dt-bindings: pinctrl: Update pinctrl-single to use yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] video: fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe()
- From: Helge Deller <deller@xxxxxx>
- Re: [PATCH 00/89] i2c: Convert to platform remove callback returning void
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/1] dt-bindings: pinctrl: Update pinctrl-single to use yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [GIT PULL] Clean-up for omaps for v6.5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH] video: fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe()
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- Re: [PATCH v4 1/4] Input: ads7846 - Convert to use software nodes
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/15] PCI: Convert to platform remove callback returning void
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 1/1] serial: core: Fix error handling for serial_core_ctrl_device_add()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: John Ogness <john.ogness@xxxxxxxxxxxxx>
- [GIT PULL 3/3] Devicetree changes for omaps for v6.5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 2/3] Clean-up for omap pinctrl-single nodes for v6.5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 1/3] Non-urgent driver fix for ti-sysc for v6.5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: omap2: Fix checkpatch issues
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH v2 1/1] serial: core: Fix error handling for serial_core_ctrl_device_add()
- From: Jiri Slaby <jirislaby@xxxxxxxxxx>
- [PATCH v2 1/1] serial: core: Fix error handling for serial_core_ctrl_device_add()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] serial: core: Fix error handling for serial_core_ctrl_device_add()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] serial: core: Fix error handling for serial_core_ctrl_device_add()
- From: Jiri Slaby <jirislaby@xxxxxxxxxx>
- Re: [PATCH] serial: core: Fix error handling for serial_core_ctrl_device_add()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] serial: core: Fix error handling for serial_core_ctrl_device_add()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH] serial: core: Fix probing serial_base_bus devices
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH] serial: core: Fix probing serial_base_bus devices
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/89] i2c: Convert to platform remove callback returning void
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH] remoteproc: pru: add support for configuring GPMUX based on client setup
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [PATCH] serial: core: Don't drop port_mutex in serial_core_remove_one_port
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] serial: core: Don't drop port_mutex in serial_core_remove_one_port
- From: Steven Price <steven.price@xxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Steven Price <steven.price@xxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Steven Price <steven.price@xxxxxxx>
- RE: [PATCH 00/89] i2c: Convert to platform remove callback returning void
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH 00/89] i2c: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH] ARM: omap2: Fix checkpatch issues
- From: Franziska Naepelt <franziska.naepelt@xxxxxxxxxxxxxx>
- Re: [PATCH 1/8] clk: vc5: check memory returned by kasprintf()
- From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
- Re: [PATCH] arm: omap1: replace printk() with pr_err macro
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: omap: Fix checkpatch issues
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap4: add initial support for Epson Moverio BT-200
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am335x-myirtech: Add missing NAND wait pin definition
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] bus: ti-sysc: convert sysfs sprintf to sysfs_emit
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] bus: ti-sysc: convert sysfs sprintf to sysfs_emit
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] rtc: rtc-twl: add NVRAM support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 6/8] clk: keystone: sci-clk: check return value of kasprintf()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 7/8] clk: ti: clkctrl: check return value of kasprintf()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] hwspinlock: Convert to platform remove callback returning void
- From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
- [PATCH] ARM: omap: Fix checkpatch issues
- From: Franziska Naepelt <franziska.naepelt@xxxxxxxxxxxxxx>
- Re: [PATCH 00/51] video: fbdev: Convert to platform remove callback returning void
- From: Helge Deller <deller@xxxxxx>
- Re: [PATCH 00/51] video: fbdev: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 00/51] video: fbdev: Convert to platform remove callback returning void
- From: Helge Deller <deller@xxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/15] PCI: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 00/51] video: fbdev: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 0/3] hwspinlock: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v4 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: andy.shevchenko@xxxxxxxxx
- [PATCH 7/8] clk: ti: clkctrl: check return value of kasprintf()
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH 6/8] clk: keystone: sci-clk: check return value of kasprintf()
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH 8/8] clk: clocking-wizard: check return value of devm_kasprintf()
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH 5/8] clk: si5341: free unused memory on probe failure
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH 3/8] clk: si5341: return error if one synth clock registration fails
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH 4/8] clk: si5341: check return value of {devm_}kasprintf()
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH 2/8] clk: cdce925: check return value of kasprintf()
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH 1/8] clk: vc5: check memory returned by kasprintf()
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH 0/8] clk: check memory returned by {devm_}kasprintf()
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v4 2/2] mfd: tps65219: Add gpio cell instance
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH v4 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH v4 0/2] Add support for TI TPS65219 PMIC GPIO interface.
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: jerome Neanne <jneanne@xxxxxxxxxxxx>
- Re: [PATCH 00/97] usb: Convert to platform remove callback returning void
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/97] usb: Convert to platform remove callback returning void
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: andy.shevchenko@xxxxxxxxx
- [PATCH v3 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH v3 2/2] mfd: tps65219: Add gpio cell instance
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH v3 0/2] Add support for TI TPS65219 PMIC GPIO interface.
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH v3] mfd: tps65219: Add support for soft shutdown via sys-off API
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: OMAP4/5 AESS on v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: OMAP4/5 AESS on v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
- From: Helge Deller <deller@xxxxxx>
- [PATCH v12 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3] ARM/gpio: Push OMAP2 quirk down into TWL4030 driver
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH] mfd: tps65219: Add support for soft shutdown via sys-off API
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: OMAP4/5 AESS on v6.4
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: OMAP4/5 AESS on v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
- From: Vlastimil Babka <vbabka@xxxxxxx>
- [GIT PULL] OMAP GPIO numbers cleanup
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] ARM: dts: am335x-myirtech: Add missing NAND wait pin definition
- From: Alexander Shiyan <eagle.alexander923@xxxxxxxxx>
- Re: [PATCH] mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
- From: David Rientjes <rientjes@xxxxxxxxxx>
- Re: [PATCH 06/13] ARM: lpc32xx: add missing include
- From: Vladimir Zapolskiy <vz@xxxxxxxxx>
- Re: [PATCH v2 0/2] ASoC: do not include runtime_pm.h if not needed
- From: Mark Brown <broonie@xxxxxxxxxx>
- OMAP4/5 AESS on v6.4
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH] mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
- From: Hyeonggon Yoo <42.hyeyoo@xxxxxxxxx>
- Re: RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
- From: Wadim Egorov <w.egorov@xxxxxxxxx>
- Re: [PATCH] mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
- From: Vlastimil Babka <vbabka@xxxxxxx>
- Re: [PATCH] mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v5 1/1] dt-bindings: pinctrl: Update pinctrl-single to use yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
- From: Vlastimil Babka <vbabka@xxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH] ARM: dts: Unify pinctrl-single pin group nodes for omap4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: Unify pinctrl-single pin group nodes for omap2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: Unify pinctrl-single pin group nodes for omap5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: Unify pinctrl-single pin group nodes for ti81xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] ARM: dts: gta04: Move model property out of pinctrl node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: Unify pinctrl-single pin group nodes for dra7
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: Unify pinctrl-single pin group nodes for am4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Mystery dtb check errors with ti,x-plate-ohms with txt only binding
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 19/97] usb: dwc3-omap: Convert to platform remove callback returning void
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: jerome Neanne <jneanne@xxxxxxxxxxxx>
- Re: RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
- From: jerome Neanne <jneanne@xxxxxxxxxxxx>
- Re: [PATCH v7 0/6] Add support for TI TPS65219 PMIC.
- From: jerome Neanne <jneanne@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
- From: jerome Neanne <jneanne@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: jerome Neanne <jneanne@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: andy.shevchenko@xxxxxxxxx
- Re: [PATCH] arm: omap1: replace printk() with pr_err macro
- From: Kevin Hilman <khilman@xxxxxxxxxxxx>
- Re: Mystery dtb check errors with ti,x-plate-ohms with txt only binding
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH] fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
- From: Helge Deller <deller@xxxxxx>
- Mystery dtb check errors with ti,x-plate-ohms with txt only binding
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v5] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] arm: omap1: replace printk() with pr_err macro
- From: Prathu Baronia <quic_pbaronia@xxxxxxxxxxx>
- [PATCH 52/97] usb: ehci-omap: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 68/97] usb: ohci-omap: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 19/97] usb: dwc3-omap: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 00/97] usb: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: omap1: Drop header on AMS Delta
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Re: [PATCH v5] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH v6] ARM: omap1: Make serial wakeup GPIOs use descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2] ARM: omap1: Make serial wakeup GPIOs use descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 2/4] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v5] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2] ARM: omap1: Make serial wakeup GPIOs use descriptors
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v3] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 1/4] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 1/4] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] ARM: omap1: Make serial wakeup GPIOs use descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2] ARM: omap1: Make serial wakeup GPIOs use descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 1/4] Input: ads7846 - Convert to use software nodes
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v4 2/4] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v4 1/4] Input: ads7846 - Convert to use software nodes
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] ARM: omap1: Make serial wakeup GPIOs use descriptors
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] ARM: omap1: Make serial wakeup GPIOs use descriptors
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v9 0/4] Introduce PRU platform consumer API
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 05/13] ARM: imx: remove unused mx25_revision()
- From: Martin Kaiser <martin@xxxxxxxxx>
- Re: [PATCH v7 1/2] dt-bindings: omap: Partially convert omap.txt to yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3] ARM/gpio: Push OMAP2 quirk down into TWL4030 driver
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v2 2/2] ASoC: use pm.h instead of runtime_pm.h
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 1/2] ASoC: do not include pm_runtime.h if not used
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 0/2] ASoC: do not include runtime_pm.h if not needed
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- Re: [PATCH v3] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v4 2/2] dt-bindings: pinctrl: Update pinctrl-single to use yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 2/2] dt-bindings: pinctrl: Update pinctrl-single to use yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v7 1/2] dt-bindings: omap: Partially convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] dt-bindings: pinctrl: Update pinctrl-single to use yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] bus: ti-sysc: Fix dispc quirk masking bool variables
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [bug report] bus: ti-sysc: Implement display subsystem reset quirk
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v7 2/2] MAINTAINERS: add board bindings list to OMAP2+ files
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v7 1/2] dt-bindings: omap: Partially convert omap.txt to yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 05/13] ARM: imx: remove unused mx25_revision()
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mfd: tps65219: Add support for soft shutdown via sys-off API
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 07/13] ARM: omap1: add missing include
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 07/13] ARM: omap1: add missing include
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 12/13] ARM: spear: include "pl080.h" for pl080_get_signal() prototype
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH 05/13] ARM: imx: remove unused mx25_revision()
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH 08/13] ARM: omap2: fix missing tick_broadcast() prototype
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH 07/13] ARM: omap1: add missing include
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v3] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 09/13] ARM: orion5x: fix d2net gpio initialization
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 03/13] ARM: highbank: add missing include
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH v3] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH 02/13] ARM: ep93xx: fix missing-prototype warnings
- From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
- Re: [PATCH 01/13] ARM: davinci: fix davinci_cpufreq_init() declaration
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: jerome Neanne <jneanne@xxxxxxxxxxxx>
- Re: [PATCH v3] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH v3] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] ARM: dts: omap4: add initial support for Epson Moverio BT-200
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v7 1/2] dt-bindings: omap: Partially convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v3] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Lee Jones <lee@xxxxxxxxxx>
- [PATCH] fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [bug report] bus: ti-sysc: Implement display subsystem reset quirk
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH v7 2/2] MAINTAINERS: add board bindings list to OMAP2+ files
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v7 1/2] dt-bindings: omap: Partially convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v7 0/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v11 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2 2/2] PCI: j721e: Add support to build pci-j721e as a kernel module
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH 0/2] Add support to build pci-j721e as a kernel module
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v2 1/2] PCI: cadence: Add support to build pcie-cadence library as a kernel module.
- From: Achal Verma <a-verma1@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH 3/3] arm64: defconfig: enable J721e PCIe controller
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH 3/3] arm64: defconfig: enable J721e PCIe controller
- From: "Verma, Achal" <a-verma1@xxxxxx>
- Re: [PATCH v11 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] ARM/musb: omap2: Remove global GPIO numbers from TUSB6010
- From: Greg KH <greg@xxxxxxxxx>
- [RESEND PATCH] hwspinlock: omap: drop of_match_ptr for ID table
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/3] PCIE: j721e: Add support to build pci-j721e as a kernel module
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 3/3] arm64: defconfig: enable J721e PCIe controller
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH 0/3] Add support to build pci-j721e as a kernel module
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH 2/3] PCIE: j721e: Add support to build pci-j721e as a kernel module
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH 1/3] PCI: cadence: Add support to build pcie-cadence library as a kernel module.
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH 3/3] arm64: defconfig: enable J721e PCIe controller
- From: Achal Verma <a-verma1@xxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] mfd: tps65219: Add gpio cell instance
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 2/2] mfd: tps65219: Add gpio cell instance
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH v2 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH v2 0/2] Add support for TI TPS65219 PMIC GPIO interface.
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH] mfd: tps65219: Add support for soft shutdown via sys-off API
- From: Jerome Neanne <jneanne@xxxxxxxxxxxx>
- [PATCH v11 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 2/2] dt-bindings: pinctrl: Update pinctrl-single to use yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 2/2] dt-bindings: pinctrl: Update pinctrl-single to use yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: pinctrl: Allow use of pinconf in addition to pinctrl and pinmux
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: pinctrl: Allow use of pinconf in addition to pinctrl and pinmux
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: pinctrl: Allow use of pinconf in addition to pinctrl and pinmux
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v4 2/2] dt-bindings: pinctrl: Update pinctrl-single to use yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
- Re: [PATCH v10 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RESEND PATCH] regulator: tps65219: Fix matching interrupts for their regulators
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 48/89] i2c: omap: Convert to platform remove callback returning void
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v10 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 1/3] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 3/3] ARM: omap1: Fix up the Nokia 770 board device IRQs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 1/3] Input: ads7846 - Convert to use software nodes
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v4 1/4] Input: ads7846 - Convert to use software nodes
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v3 1/3] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v4 3/4] ARM: omap1: Fix up the Nokia 770 board device IRQs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v4 4/4] ARM: dts: Fix erroneous ADS touchscreen polarities
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v4 2/4] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v4 1/4] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v4 0/4] Fix up Nokia 770 regression
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 1/3] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 00/89] i2c: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 48/89] i2c: omap: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] ARM: omap1: Fix up the Nokia 770 board device IRQs
- From: andy.shevchenko@xxxxxxxxx
- Re: [PATCH v3 1/3] Input: ads7846 - Convert to use software nodes
- From: andy.shevchenko@xxxxxxxxx
- Re: [PATCH v10 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v10 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- [PATCH] serial: 8250: Allow using ports higher than SERIAL_8250_RUNTIME_UARTS
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] serial: 8250: omap: Fix freeing of resources on failed register
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v10 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] serial: 8250: omap: Fix freeing of resources on failed register
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [RESEND PATCH] regulator: tps65219: Fix matching interrupts for their regulators
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- [PATCH 4/4] serial: 8250: omap: Shut down on remove for console uart
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/4] serial: 8250: omap: Fix life cycle issues for interrupt handlers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/4] serial: 8250: omap: Fix imprecise external abort for omap_8250_pm()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/4] serial: 8250: omap: Fix freeing of resources on failed register
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/4] More console rebind changes for 8250_omap serial driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [RESEND PATCH] regulator: tps65219: Fix matching interrupts for their regulators
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 1/3] Input: ads7846 - Convert to use software nodes
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: Pinconf issues on AMxxx plattforms
- From: "Niedermayr, BENEDIKT" <benedikt.niedermayr@xxxxxxxxxxx>
- Re: Pinconf issues on AMxxx plattforms
- From: "Niedermayr, BENEDIKT" <benedikt.niedermayr@xxxxxxxxxxx>
- [PATCH v3 0/3] Fix up Nokia 770 regression
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 2/3] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 3/3] ARM: omap1: Fix up the Nokia 770 board device IRQs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 1/3] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 1/3] Input: ads7846 - Convert to use software nodes
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 1/3] Input: ads7846 - Convert to use software nodes
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: Pinconf issues on AMxxx plattforms
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2 0/3] Fix up Nokia 770 regression
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 2/3] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 1/3] Input: ads7846 - Convert to use software nodes
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 3/3] ARM: omap1: Fix up the Nokia 770 board device IRQs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v3] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/3] ARM/gpio: Push OMAP2 quirk down into TWL4030 driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- [PATCH] bus: ti-sysc: convert sysfs sprintf to sysfs_emit
- From: Bo Liu <liubo03@xxxxxxxxxx>
- Re: Pinconf issues on AMxxx plattforms
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [Linux-stm32] [RFC PATCH 0/1] Categorize ARM dts directory
- From: Alexandre TORGUE <alexandre.torgue@xxxxxxxxxxx>
- [PATCH v3] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Pinconf issues on AMxxx plattforms
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/4] Input/ARM: ads7846: Get pendown IRQ from descriptors
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [PATCH 1/3] ARM/gpio: Push OMAP2 quirk down into TWL4030 driver
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH 3/4] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Jesper Nilsson <jesper.nilsson@xxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Pinconf issues on AMxxx plattforms
- From: "Niedermayr, BENEDIKT" <benedikt.niedermayr@xxxxxxxxxxx>
- Re: [PATCH] arm: dts: Add am335x-boneblack-pps.dts
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Christian Hewitt <christianshewitt@xxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [PATCH 3/4] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- [RFC PATCH v7 1/2] dt-bindings: net: Add ICSSG Ethernet
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [RFC PATCH v7 0/2] Introduce ICSSG based ethernet Driver
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH 2/3] ARM: omap2: Get USB hub reset GPIO from descriptor
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 3/3] ARM: omap2: Rewrite WLAN quirk to use GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/3] ARM/gpio: Push OMAP2 quirk down into TWL4030 driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 0/3] Get rid of OMAP2 GPIO pdata quirks
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] ARM/musb: omap2: Remove global GPIO numbers from TUSB6010
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] ARM: omap1: Exorcise the legacy GPIO header
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] ARM: omap1: Make serial wakeup GPIOs use descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] ARM: omap1: Remove reliance on GPIO numbers from SX1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH] ARM: omap1: Remove reliance on GPIO numbers from PalmTE
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] ARM: omap1: Drop header on AMS Delta
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 4/4] ARM: omap1: Fix up the Nokia 770 board device IRQs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 2/4] fbdev/ARM: Fix up LCD MIPID GPIO usage
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/4] Input/ARM: ads7846: Get pendown IRQ from descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 0/4] Fix up Nokia 770 regression
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 3/4] ARM/mmc: Convert old mmci-omap to GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: [PATCH v2] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH] arm: dts: Add am335x-boneblack-pps.dts
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- [PATCH v2] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: Reid Tonking <reidt@xxxxxx>
- Re: [PATCH] arm: dts: Add am335x-boneblack-pps.dts
- From: Robert Nelson <robertcnelson@xxxxxxxxx>
- Re: [PATCH] arm: dts: Add am335x-boneblack-pps.dts
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [RFC PATCH v6 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- [PATCH] arm: dts: Add am335x-boneblack-pps.dts
- From: Julien Panis <jpanis@xxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [RFC PATCH v6 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v2] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH v2] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [RFC PATCH v6 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- Re: [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: "Raghavendra, Vignesh" <vigneshr@xxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [EXTERNAL] Re: [RFC PATCH v6 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
- [PATCH] gpiolib: fix allocation of mixed dynamic/static GPIOs
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v2] i2c: omap: Fix standard mode false ACK readings
- From: Reid Tonking <reidt@xxxxxx>
- Re: [RFC PATCH v6 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: andy.shevchenko@xxxxxxxxx
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [RFC PATCH v6 1/2] dt-bindings: net: Add ICSSG Ethernet
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [BISECTED REGRESSION] OMAP1 GPIO breakage
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Robin Murphy <robin.murphy@xxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- [PATCH] i2c: omap: Fix standard mode false ACK readings
- From: Reid Tonking <reidt@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH] i2c: omap: Fix standard mode false ACK readings
- From: Reid Tonking <reidt@xxxxxx>
- Re: [PATCH] i2c: omap: Fix standard mode false ACK readings
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Ansuel Smith <ansuelsmth@xxxxxxxxx>
- Re: [RFC PATCH 0/1] Categorize ARM dts directory
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- [PATCH] i2c: omap: Fix standard mode false ACK readings
- From: Reid Tonking <reidt@xxxxxx>
- [RFC PATCH v6 1/2] dt-bindings: net: Add ICSSG Ethernet
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [RFC PATCH v6 0/2] Introduce ICSSG based ethernet Driver
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v2 02/13] ASoC: ti: use asoc_dummy_dlc
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH v2 00/13] ASoC: add and use asoc_dummy_dlc
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH] PCI: dra7xx: Fix missing unwind goto in 'dra7xx_pcie_probe'
- From: Huang Yuhao <u202212057@xxxxxxxxxxx>
- Re: [PATCH] arm64: defconfig: Enable PRUSS as module
- From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
- Re: [PATCH v5 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] serial: core: Disable uart_start() on uart_remove_one_port()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] arm64: defconfig: Enable PRUSS as module
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [PATCH] rtc: rtc-twl: add NVRAM support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] rtc: rtc-twl: add NVRAM support
- From: Ladislav Michl <oss-lists@xxxxxxxxx>
- [PATCH v2 1/1] serial: 8250: Reinit port->pm on port specific driver unbind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] rtc: rtc-twl: add NVRAM support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 03/11] ASoC: ti: use asoc_dummy_dlc
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [PATCH] clocksource/drivers/timer-ti-dm: Fix finding alwon timer
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
- Re: [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v9 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v9 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v9 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v9 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v9 0/4] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v8 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: Motorola Droid 4 -- Stopping charger when battery is full
- From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
- [PATCH] rtc: rtc-twl: add NVRAM support
- From: Ladislav Michl <oss-lists@xxxxxxxxx>
- Re: [PATCH v4 8/9] iio: adc: palmas: add support for iio threshold events
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: Motorola Droid 4 -- Stopping charger when battery is full
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Motorola Droid 4 -- Stopping charger when battery is full
- From: Pavel Machek <pavel@xxxxxx>
- Re: Motorola Droid 4 -- Stopping charger when battery is full
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH] serial: 8250: Clear port->pm on port specific driver unbind
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 0/9] iio: adc: palmas_gpadc: add iio events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/3] hwspinlock: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v8 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v8 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v8 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v8 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v8 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- [PATCH v8 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v8 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v8 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v8 0/4] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v8 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [PATCH] net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [EXTERNAL] Re: [PATCH v7 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix deferred probe warnings
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix deferred probe warnings
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix deferred probe warnings
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix deferred probe warnings
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH] drm/omap: dsi: Fix deferred probe warnings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] clocksource/drivers/timer-ti-dm: Fix finding alwon timer
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v7 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v7 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v7 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v7 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH] net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
- From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v7 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- [PATCH] net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v7 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v7 0/4] Introduce PRU platform consumer API
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v7 0/4] Introduce PRU platform consumer API
- From: Md Danish Anwar <a0501179@xxxxxx>
- [PATCH v4 9/9] iio: adc: palmas: don't alter event config on suspend/resume
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 8/9] iio: adc: palmas: add support for iio threshold events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 7/9] iio: adc: palmas: always reset events on unload
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 6/9] iio: adc: palmas: move eventX_enable into palmas_adc_event
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 5/9] iio: adc: palmas: use iio_event_direction for threshold polarity
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 4/9] iio: adc: palmas: replace "wakeup" with "event"
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 3/9] iio: adc: palmas: remove adc_wakeupX_data
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 2/9] iio: adc: palmas: Take probe fully device managed.
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 1/9] iio: adc: palmas_gpadc: fix NULL dereference on rmmod
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v4 0/9] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 3/7] iio: adc: palmas: use iio_event_direction for threshold polarity
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 2/7] iio: adc: palmas: replace "wakeup" with "event"
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- Re: [PATCH v3 6/7] iio: adc: palmas: add support for iio threshold events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- Re: [PATCH v3 7/7] iio: adc: palmas: don't alter event config on suspend/resume
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 6/7] iio: adc: palmas: add support for iio threshold events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v7 0/4] Introduce PRU platform consumer API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH] i2c: omap: Improve error reporting for problems during .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v7 0/4] Introduce PRU platform consumer API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] i2c: omap: Don't do pm_runtime_resume in .remove()
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- [PATCH v3 6/7] iio: adc: palmas: add support for iio threshold events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 7/7] iio: adc: palmas: don't alter event config on suspend/resume
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 5/7] iio: adc: palmas: always reset events on unload
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 2/7] iio: adc: palmas: replace "wakeup" with "event"
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 4/7] iio: adc: palmas: move eventX_enable into palmas_adc_event
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 3/7] iio: adc: palmas: use iio_event_direction for threshold polarity
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 0/7] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v3 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v6 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v6 2/2] MAINTAINERS: add board bindings list to OMAP2+ files
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v6 0/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH 00/10] usb: musb: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 07/10] usb: musb: omap2430: Convert to platform remove callback returning void
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v5 2/2] MAINTAINERS: add board bindings list to OMAP2+ files
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v5 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v5 0/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andrew Davis <afd@xxxxxx>
- [PATCH v4 2/2] MAINTAINERS: add board bindings list to OMAP2+ files
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v4 0/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v7 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v7 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v7 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v7 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v7 0/4] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [PATCH] ASoC: ti: omap-dmic: use devm_platform_ioremap_resource_byname()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] ASoC: ti: omap-mcpdm: use devm_platform_ioremap_resource_byname()
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 0/3] p54spi devicetree conversion
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v12 1/5] dt-bindings: PCI: ti,j721e-pci-*: add checks for num-lanes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v6 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v6 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH] i2c: omap: Don't do pm_runtime_resume in .remove()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Don't do pm_runtime_resume in .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: omap: Don't do pm_runtime_resume in .remove()
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- [PATCH v2 6/7] iio: adc: palmas: add support for iio threshold events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 0/7] iio: adc: palmas_gpadc: add iio events
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 1/7] iio: adc: palmas: remove adc_wakeupX_data
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 4/7] iio: adc: palmas: move eventX_enable into palmas_adc_event
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 7/7] iio: adc: palmas: don't alter event config on suspend/resume
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 5/7] iio: adc: palmas: always reset events on unload
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 2/7] iio: adc: palmas: replace "wakeup" with "event"
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH v2 3/7] iio: adc: palmas: use iio_event_direction for threshold polarity
- From: Patrik Dahlström <risca@xxxxxxxxxxxxxx>
- [PATCH] i2c: omap: Don't do pm_runtime_resume in .remove()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v6 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: Simon Horman <simon.horman@xxxxxxxxxxxx>
- [PATCH v12 0/5] PCI: add 4x lane support for pci-j721e controllers
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v12 3/5] PCI: j721e: Add PCIe 4x lane selection support
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v12 1/5] dt-bindings: PCI: ti,j721e-pci-*: add checks for num-lanes
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v12 5/5] PCI: j721e: add j784s4 PCIe configuration
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v12 4/5] dt-bindings: PCI: ti,j721e-pci-*: add j784s4-pci-* compatible strings
- From: Achal Verma <a-verma1@xxxxxx>
- [PATCH v12 2/5] PCI: j721e: Add per platform maximum lane settings
- From: Achal Verma <a-verma1@xxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- [PATCH v6 4/4] soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v6 3/4] soc: ti: pruss: Add pruss_cfg_read()/update(), pruss_cfg_get_gpmux()/set_gpmux() APIs
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v6 2/4] soc: ti: pruss: Add pruss_{request,release}_mem_region() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v6 1/4] soc: ti: pruss: Add pruss_get()/put() API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- [PATCH v6 0/4] Introduce PRU platform consumer API
- From: MD Danish Anwar <danishanwar@xxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Md Danish Anwar <a0501179@xxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] thermal: Use of_property_present() for testing DT property presence
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH] thermal: Use of_property_present() for testing DT property presence
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Max Georgiev <glipus@xxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Max Georgiev <glipus@xxxxxxxxx>
- Re: [PATCH] thermal: Use of_property_present() for testing DT property presence
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v5 3/5] soc: ti: pruss: Add pruss_cfg_read()/update() API
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: omap: Convert omap.txt to yaml
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v9 1/1] serial: core: Start managing serial controllers to enable runtime PM
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [GIT PULL] Clean-up for omap1 for v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] Devicetree overlays for omaps for v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] Devicetree changes for omaps for v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] Driver clean-up for ti-sysc for v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] Clean-up for omaps for v6.4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/5] net: Let the active time stamping layer be selectable.
- From: Köry Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH] mfd: omap-usb-tll: remove unused usbtll_readb function
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH] mfd: twl-core: remove unused add_child and add_numbered_child functions
- From: Lee Jones <lee@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]