Re: [PATCH v4 1/2] gpio: tps65219: add GPIO support for TPS65219 PMIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 30, 2023 at 10:00 AM Jerome Neanne <jneanne@xxxxxxxxxxxx> wrote:

> Add support for TPS65219 PMICs GPIO interface.
>
> 3 GPIO pins:
> - GPIO0 only is IO but input mode reserved for MULTI_DEVICE_ENABLE usage
> - GPIO1 and GPIO2 are Output only and referred as GPO1 and GPO2 in spec
>
> GPIO0 is statically configured as input or output prior to Linux boot.
> it is used for MULTI_DEVICE_ENABLE function.
> This setting is statically configured by NVM.
> GPIO0 can't be used as a generic GPIO (specification Table 8-34).
> It's either a GPO when MULTI_DEVICE_EN=0 or a GPI when MULTI_DEVICE_EN=1.
>
> Datasheet describes specific usage for non standard GPIO.
> Link: https://www.ti.com/lit/ds/symlink/tps65219.pdf
>
> Co-developed-by: Jonathan Cormier <jcormier@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jonathan Cormier <jcormier@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jerome Neanne <jneanne@xxxxxxxxxxxx>

I agree with Andy's review comments, so fix these.
Once those are fixed you can add my:
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

Yours,
Linus Walleij




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux