Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- omap voltage management
- From: Ran Shalit <ranshalit@xxxxxxxxx>
- Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [alsa-devel] Patches to bind the SGTL5000 chip to AM33XX McASP
- From: Nikolay Dimitrov <picmaster@xxxxxxx>
- Re: [PATCH] usb: musb: Fix fifo reads for dm816x with musb_dsps
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] Update Nanobone dts file
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: musb: Fix fifo reads for dm816x with musb_dsps
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: musb: Fix fifo reads for dm816x with musb_dsps
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: Patches to bind the SGTL5000 chip to AM33XX McASP
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
- Re: [PATCH 02/35 linux-next] regulator: constify of_device_id array
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 0/3] OMAP 3 ISP (and N9/N950 primary camera support) dts changes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/8] gpio: omap: convert omap_gpio_is_input() to use gpio offset
- From: <grygorii.strashko@xxxxxxxxxx>
- [PATCH 2/8] gpio: omap: simplify omap_set_gpio_dataout_x()
- From: <grygorii.strashko@xxxxxxxxxx>
- [PATCH 4/8] gpio: omap: drop 'gpio' param from omap_gpio_init_irq()
- From: <grygorii.strashko@xxxxxxxxxx>
- Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
- [PATCH 6/8] gpio: omap: get rid of GPIO_BIT() macro
- From: <grygorii.strashko@xxxxxxxxxx>
- [RFT OMAP1 PATCH 8/8] gpio: omap: get rid of GPIO_INDEX() macro
- From: <grygorii.strashko@xxxxxxxxxx>
- [PATCH 5/8] gpio: omap: convert gpio irq functions to use GPIO offset
- From: <grygorii.strashko@xxxxxxxxxx>
- [RFT OMAP1 PATCH 7/8] gpio: omap: get rid of omap_irq_to_gpio()
- From: <grygorii.strashko@xxxxxxxxxx>
- [PATCH 3/8] gpio: omap: convert debounce functions switch to use gpio offset
- From: <grygorii.strashko@xxxxxxxxxx>
- [PATCH 0/8] gpio: omap: cleanup: get rid of system GPIO <-> GPIO offset converseations
- From: <grygorii.strashko@xxxxxxxxxx>
- Re: Patches to bind the SGTL5000 chip to AM33XX McASP
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 07/10] ARM: dts: n9/n950: Enable omap crypto support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
- Re: [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2.1] ASoC: davinci-mcasp: Set rule constraints if implicit BCLK divider is used
- From: Jyri Sarha <jsarha@xxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Patches to bind the SGTL5000 chip to AM33XX McASP
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: musb: Fix fifo reads for dm816x with musb_dsps
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
- [PATCH v2] Update Nanobone dts file
- From: Mark Jackson <mpfj@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [RFC][PATCH 3/9] usb: otg: add OTG core
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [RFC][PATCH 2/9] usb: gadget: add usb_gadget_start/stop()
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [RFC][PATCH 3/9] usb: otg: add OTG core
- From: Li Jun <b47624@xxxxxxxxxxxxx>
- Re: [PATCH v7 5/6] ARM: dts: add wl12xx/wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: Patches to bind the SGTL5000 chip to AM33XX McASP
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
- Re: [RFC][PATCH 2/9] usb: gadget: add usb_gadget_start/stop()
- From: Li Jun <b47624@xxxxxxxxxxxxx>
- Re: [RFC][PATCH 1/9] usb: hcd: Introduce usb_start/stop_hcd()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 5/6] ARM: dts: add wl12xx/wl18xx bindings
- From: Pontus Fuchs <pontus.fuchs@xxxxxxxxx>
- Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] usb: musb: Fix fifo reads for dm816x with musb_dsps
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
- [PATCH v2.1] ASoC: davinci-mcasp: Set rule constraints if implicit BCLK divider is used
- From: Jyri Sarha <jsarha@xxxxxx>
- Re: Patches to bind the SGTL5000 chip to AM33XX McASP
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] Update Nanobone dts file
- From: Mark Jackson <mpfj@xxxxxxxxxxxxx>
- Re: [RFC][PATCH 1/9] usb: hcd: Introduce usb_start/stop_hcd()
- From: Roger Quadros <rogerq@xxxxxx>
- Re: Patches to bind the SGTL5000 chip to AM33XX McASP
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
- Re: [RFC][PATCH 0/9] USB: OTG Core functionality
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [RFC][PATCH 3/9] usb: otg: add OTG core
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [RFC][PATCH 8/9] usb: otg-fsm: Remove unused members in struct otg_fsm
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [RFC][PATCH 3/9] usb: otg: add OTG core
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [RFC][PATCH 2/9] usb: gadget: add usb_gadget_start/stop()
- From: Roger Quadros <rogerq@xxxxxx>
- Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2] ASoC: davinci-mcasp: Set rule constraints if implicit BCLK divider is used
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2] ASoC: davinci-mcasp: Set rule constraints if implicit BCLK divider is used
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [RFC][PATCH 3/9] usb: otg: add OTG core
- From: Li Jun <b47624@xxxxxxxxxxxxx>
- [PATCH v2] ASoC: davinci-mcasp: Set rule constraints if implicit BCLK divider is used
- From: Jyri Sarha <jsarha@xxxxxx>
- Re: [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH 06/15] omap3isp: Refactor device configuration structs for Device Tree
- From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
- Re: [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCHv4 23/35] ARM: OMAP2+: id: cache omap_type value
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCHv3 08/35] clk: ti: fix ti_clk_get_reg_addr error handling
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH 4/4] ARM: dts: Add minimal support for dm8168-evm
- From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
- Patches to bind the SGTL5000 chip to AM33XX McASP
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
- Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
- Re: [RFC][PATCH 3/9] usb: otg: add OTG core
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [RFC][PATCH 8/9] usb: otg-fsm: Remove unused members in struct otg_fsm
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [RFC][PATCH 2/9] usb: gadget: add usb_gadget_start/stop()
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [RFC][PATCH 1/9] usb: hcd: Introduce usb_start/stop_hcd()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC][PATCH 1/9] usb: hcd: Introduce usb_start/stop_hcd()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH 1/9] usb: hcd: Introduce usb_start/stop_hcd()
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH v2 2/3] arm: dts: omap3: Add DT entries for OMAP 3
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH v2 1/3] dt: bindings: Add bindings for omap3isp
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH v2 3/3] arm: dts: n950, n9: Add primary camera support
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH v2 0/3] OMAP 3 ISP (and N9/N950 primary camera support) dts changes
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH] usb: musb: Fix fifo reads for dm816x with musb_dsps
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
- Re: [PATCH v8 0/4] hwspinlock core & omap dt support
- From: Suman Anna <s-anna@xxxxxx>
- Re: [RFC][PATCH 1/9] usb: hcd: Introduce usb_start/stop_hcd()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv4 30/35] ARM: dts: omap4: add system control module node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Serious memory leak in TI EDMA driver (drivers/dma/edma.c)
- From: Petr Kulhavy <petr@xxxxxxxxx>
- Re: [PATCH v7 0/6] wlcore: add device-tree support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC][PATCH 1/9] usb: hcd: Introduce usb_start/stop_hcd()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
- Patches to bind the SGTL5000 chip to AM33XX McASP
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
- Re: [PATCHv4 23/35] ARM: OMAP2+: id: cache omap_type value
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC][PATCH 0/9] USB: OTG Core functionality
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv3 08/35] clk: ti: fix ti_clk_get_reg_addr error handling
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: dts: Add minimal support for dm8168-evm
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v7 6/6] wlcore: remove wl12xx_platform_data
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v7 5/6] ARM: dts: add wl12xx/wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v7 4/6] wlcore: add device-tree support
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v7 3/6] dt: bindings: add TI's wilink wireless device
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v7 2/6] wl12xx: use frequency instead of enumerations for pdata clocks
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v7 1/6] wlcore: set irq_trigger in board files instead of hiding behind a quirk
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v7 0/6] wlcore: add device-tree support
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: dra7: remove ti,hwmod property from pcie phy
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 1/8] time: Add y2038 safe read_boot_clock64()
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH 3/4] ARM: dts: Add cppi41 support for dm816x MUSB
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] drm/omap: tiler: add hibernation callback
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH v5 0/5] Add support for Fujitsu USB host controller
- From: Sneeker Yeh <sneeker.yeh@xxxxxxxxx>
- Re: [PATCH v2] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] phy: Add a driver for dm816x USB PHY
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v2] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] drm/omap: tiler: add hibernation callback
- From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
- [PATCHv4 35/35] ARM: OMAP4+: control: add support for initializing control module via DT
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 34/35] ARM: dts: dra7: add system control module node
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 30/35] ARM: dts: omap4: add system control module node
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 33/35] ARM: dts: omap5: add system control module node
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 32/35] ARM: OMAP4+: control: remove support for legacy pad read/write
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 31/35] ARM: OMAP4: display: convert display to use syscon for dsi muxing
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 27/35] ARM: dts: am33xx: merge control module features under scrm node
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 26/35] ARM: dts: omap3: merge control module features under scrm node
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 29/35] ARM: dts: am4372: merge control module features under scrm node
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 28/35] ARM: dts: am43xx-epos-evm: fix pinmux node layout
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 25/35] ARM: dts: omap24xx: merge control module features under scrm node
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 24/35] ARM: OMAP2+: control: add syscon support for register accesses
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 22/35] ARM: OMAP2+: control: remove API for getting control module base address
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 23/35] ARM: OMAP2+: id: cache omap_type value
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 21/35] ARM: OMAP2+: clock: add low-level support for regmap
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 18/35] ARM: OMAP2+: CM: move SoC specific init calls within a generic API
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 20/35] ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 19/35] ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 16/35] ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 17/35] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 14/35] ARM: OMAP2+: PRM: determine PRM base address from device tree
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 15/35] ARM: OMAP2+: control: determine control module base address from DT
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 12/35] ARM: OMAP2+: PRCM: split PRCM module init to their own driver files
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 13/35] ARM: OMAP2+: CM: determine CM base address from device tree
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 11/35] ARM: OMAP2+: clock: move clock provider infrastructure to clock driver
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 10/35] ARM: OMAP2+: PRCM: add support for static clock memmap indices
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 09/35] Documentation: DT: document PRCM compatible strings for dm81x SoCs
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 08/35] clk: ti: fix ti_clk_get_reg_addr error handling
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 06/35] ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 07/35] ARM: OMAP4: PRM: move omap4xxx_prm_init earlier in init order
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 03/35] ARM: OMAP2+: PRM: add generic API for clear_mod_irqs
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 04/35] ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 05/35] ARM: OMAP4+: PRM: move omap_prm_base_init under OMAP4 PRM driver
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 02/35] ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 01/35] ARM: OMAP2+: PRCM: rename of_prcm_init to omap_prcm_init
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCHv4 00/35] ARM: OMAP2+: PRCM / SCM cleanups against 4.0-rc1
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH 3/4] ARM: dts: Add cppi41 support for dm816x MUSB
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 32/35 linux-next] clk: constify of_device_id array
- From: Michael Turquette <mturquette@xxxxxxxxxx>
- [RFC][PATCH 0/9] USB: OTG Core functionality
- From: Roger Quadros <rogerq@xxxxxx>
- [RFC][PATCH 2/9] usb: gadget: add usb_gadget_start/stop()
- From: Roger Quadros <rogerq@xxxxxx>
- [RFC][PATCH 1/9] usb: hcd: Introduce usb_start/stop_hcd()
- From: Roger Quadros <rogerq@xxxxxx>
- [RFC][PATCH 4/9] usb: otg: hub: Notify OTG fsm when A device sets b_hnp_enable
- From: Roger Quadros <rogerq@xxxxxx>
- [RFC][PATCH 3/9] usb: otg: add OTG core
- From: Roger Quadros <rogerq@xxxxxx>
- [RFC][PATCH 5/9] usb: hcd: adapt to OTG
- From: Roger Quadros <rogerq@xxxxxx>
- [RFC][PATCH 6/9] usb: gadget: udc: adapt to OTG
- From: Roger Quadros <rogerq@xxxxxx>
- [RFC][PATCH 7/9] usb: dwc3: adapt to OTG core
- From: Roger Quadros <rogerq@xxxxxx>
- [RFC][PATCH 8/9] usb: otg-fsm: Remove unused members in struct otg_fsm
- From: Roger Quadros <rogerq@xxxxxx>
- Re: Serious memory leak in TI EDMA driver (drivers/dma/edma.c)
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [RFC][PATCH 9/9] usb: otg-fsm: Add documentation for struct otg_fsm
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH] gpio: pcf857x: restore the initial line state of all pcf lines
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH] gpio: pcf857x: restore the initial line state of all pcf lines
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2] phy: Add a driver for dm816x USB PHY
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- Re: [PATCH v2 2/3] w1: masters: omap_hdq: Add support for 1-wire mode
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH] ARM: dts: dra7x-evm: beagle-x14: Fix USB Peripheral
- From: Roger Quadros <rogerq@xxxxxx>
- [PATCH v3 7/7] drm/tilcdc: Decrement refcount of ep-node from of_graph_get_next_endpoint
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v3 2/7] drm/tilcdc: Remove tilcdc slave support for tda998x driver
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v3 5/7] drm/tilcdc: Force building of DRM_TILCDC_SLAVE_COMPAT
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v3 4/7] drm/tilcdc: Add DRM_TILCDC_SLAVE_COMPAT for ti,tilcdc,slave binding support
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v3 6/7] ARM: dts: am335x-boneblack: Use new binding for HDMI
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v3 3/7] drm/tilcdc: Add support for external tda998x encoder
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v3 1/7] drm/tilcdc: Fix module unloading
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v3 0/7] Use DRM component API in tilcdc to connect to tda998x
- From: Jyri Sarha <jsarha@xxxxxx>
- Re: [PATCH 4/4] ARM: dts: Add minimal support for dm8168-evm
- From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
- Re: [PATCH] ASoC: davinci-mcasp: Set rule constraints if implicit BCLK divider is used
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- RE: [PATCH 1/3] ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
- From: "Jason" <lzg@xxxxxxxxxxxx>
- Re: [PATCHv3 08/35] clk: ti: fix ti_clk_get_reg_addr error handling
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH 1/2] pinctrl: bindings: pinctrl: Add support for TI's IODelay configuration
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] pinctrl: bindings: pinctrl: Add support for TI's IODelay configuration
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 3/4] ARM: dts: Add cppi41 support for dm816x MUSB
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/4] ARM: dts: Add cppi41 support for dm816x MUSB
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 3/4] ARM: dts: Add cppi41 support for dm816x MUSB
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/4] ARM: dts: Remove PIN_INPUT for dm816x McSPI
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/4] ARM: dts: Fix typo for dm816x usb0_pins
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/4] ARM: dts: Fix gpio interrupts for dm816x
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/4] Few dm816x fixes and improvments
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: dts: Add minimal support for dm8168-evm
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- omap voltage driver errors
- From: Ran Shalit <ranshalit@xxxxxxxxx>
- Re: Serious memory leak in TI EDMA driver (drivers/dma/edma.c)
- From: Petr Kulhavy <petr@xxxxxxxxx>
- Re: [PATCHv3 08/35] clk: ti: fix ti_clk_get_reg_addr error handling
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: dra7x-evm: beagle-x14: Fix USB Peripheral
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] Couple of dmtimer fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/3] ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 02/35 linux-next] regulator: constify of_device_id array
- From: Fabian Frederick <fabf@xxxxxxxxx>
- Re: [PATCH 02/35 linux-next] regulator: constify of_device_id array
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH] ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 02/35 linux-next] regulator: constify of_device_id array
- From: Fabian Frederick <fabf@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH] ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH] ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
- From: santosh shilimkar <santosh.shilimkar@xxxxxxxxxx>
- [PATCH] ASoC: davinci-mcasp: Set rule constraints if implicit BCLK divider is used
- From: Jyri Sarha <jsarha@xxxxxx>
- Re: [PATCH] ARM: dts: dra7x-evm: beagle-x14: Fix USB Peripheral
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Pavel Machek <pavel@xxxxxx>
- Re: [GIT PULL] OMAP-GPMC driver updates for v4.1
- From: Roger Quadros <rogerq@xxxxxx>
- Re: Serious memory leak in TI EDMA driver (drivers/dma/edma.c)
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 0/2] regulator: TPS659038: Fixes for REGEN2 and REGEN3
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 02/35 linux-next] regulator: constify of_device_id array
- From: Mark Brown <broonie@xxxxxxxxxx>
- [RESEND PATCH 2/2] bus: ocp2scp: SYNC2 value should be changed to 0x6
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [RESEND PATCH 1/2] ARM: dts: am4372: Add "ti,am437x-ocp2scp" as compatible string for OCP2SCP
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Pavel Machek <pavel@xxxxxx>
- [PATCH 0/2] regulator: TPS659038: Fixes for REGEN2 and REGEN3
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 1/2] regulator: palmas: Correct TPS659038 register definition for REGEN2
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 2/2] regulator: Palmas: Add has_regen3 check for TPS659038
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Pavel Machek <pavel@xxxxxx>
- [PATCH] ARM: dts: dra7x-evm: beagle-x14: Fix USB Peripheral
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 7/7] ARM: omap2plus_defconfig: Enable EXTCON_GPIO_USB
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v4 1/1] extcon: usb-gpio: Introduce gpio usb extcon driver
- From: "Ivan T. Ivanov" <ivan.ivanov@xxxxxxxxxx>
- Re: [PATCH v4 1/1] extcon: usb-gpio: Introduce gpio usb extcon driver
- From: "Ivan T. Ivanov" <ivan.ivanov@xxxxxxxxxx>
- Re: [PATCH v6 5/6] ARM: dts: add wl12xx/wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH] rtc: OMAP: Add external 32k clock feature
- From: Keerthy <a0393675@xxxxxx>
- Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 1/1] extcon: usb-gpio: Introduce gpio usb extcon driver
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor
- From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
- [PATCH 2/2] ARM: OMAP: dmtimer: disable pm runtime on remove
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 1/2] ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 0/2] Couple of dmtimer fixes
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH 15/15] omap3isp: Deprecate platform data support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 14/15] omap3isp: Add support for the Device Tree
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 1/3] ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/3] ARM: OMAP2+: Remove legacy support for omap3 TouchBook
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/3] ARM: OMAP3: Remove legacy support for devkit8000
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/3] Remove few inactive omap3 legacy board-*.c files
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: omap-device: add missed callback for suspend-to-disk
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] MAINTAINERS: add OMAP defconfigs under OMAP SUPPORT
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: DTS: am57xx-beagle-x15: Do not include the atl header
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP1: PM: fix some build warnings on 1510-only Kconfigs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 13/15] v4l: of: Read lane-polarity endpoint property
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: [PATCH] ARM: OMAP2+: Fix socbus family info for AM33xx devices
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: DRA7: Remove ti,timer-dsp and ti,timer-pwm properties
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 0/2] ARM: devicetree: Remove unused ti,codec property
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH RESEND] serial: omap_serial: document missing properties and add an example
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap3-beagle: Add NAND device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 3/3] ARM: dts: AM4372: update hdq compatible property
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 0/3] ARM: dts: add openpandora device support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: DTS: dra7xx-clocks: Add gate clock for CLKOUT2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] Documentation: DT: omap_serial: document missing properties and add an example
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 06/10] ARM: dts: omap3: Add missing dmas for crypto
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH] arm: boot: dts: am437x-idk: enable i2c2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 4/6] ARM: dts: omap3-gta04: Add battery support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH v4 4/6] ARM: dts: omap3-gta04: Add battery support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 4/6] ARM: dts: omap3-gta04: Add battery support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: dts: am335x: Add DTS for ChiliSOM module
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] ARM: DRA7: hwmod: Add data for GPTimers 13 through 16
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 0/2] Couple of DRA7 hwmod patches on Timers
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 2/2] ARM: DRA7: hwmod: Fix the hwmod class for GPTimer4
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v3 4/6] ARM: dts: omap3-gta04: Add battery support
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH v3 4/6] ARM: dts: omap3-gta04: Add battery support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/3] ARM: omap2plus_defconfig: Enable leds-pwm
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/3] ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/3] Few omap2plus_defconfig updates
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/3] ARM: omap2plus_defconfig: Update bluetooth options
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC PATCH] dts: Add am335x-wega-rdk.dtb sources for phyBOARD-Wega-AM335x
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 32/35 linux-next] clk: constify of_device_id array
- From: Fabian Frederick <fabf@xxxxxxxxx>
- Re: Serious memory leak in TI EDMA driver (drivers/dma/edma.c)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Serious memory leak in TI EDMA driver (drivers/dma/edma.c)
- From: Petr Kulhavy <petr@xxxxxxxxx>
- Serious memory leak in TI EDMA driver (drivers/dma/edma.c)
- From: Petr Kulhavy <petr@xxxxxxxxx>
- [PATCH 00/35 linux-next] constify of_device_id array
- From: Fabian Frederick <fabf@xxxxxxxxx>
- [PATCH 02/35 linux-next] regulator: constify of_device_id array
- From: Fabian Frederick <fabf@xxxxxxxxx>
- [PATCH 21/35 linux-next] mfd: constify of_device_id array
- From: Fabian Frederick <fabf@xxxxxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: omap1_defconfig: drop obsolete Kconfig symbols
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Sebastian Reichel <sre@xxxxxxxx>
- Re: [PATCH] arm: config: omap2plus_defconfig: switch over to LZMA compression
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 7/7] ARM: omap2plus_defconfig: Enable EXTCON_GPIO_USB
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: DRA7: Remove ti,timer-dsp and ti,timer-pwm properties
- From: Suman Anna <s-anna@xxxxxx>
- OMAP baseline test results for v4.0-rc4
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 2/6] wl12xx: use frequency instead of enumerations for pdata clocks
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 1/1] extcon: usb-gpio: Introduce gpio usb extcon driver
- From: "Ivan T. Ivanov" <ivan.ivanov@xxxxxxxxxx>
- Re: [PATCH v4 1/1] extcon: usb-gpio: Introduce gpio usb extcon driver
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v4 1/1] extcon: usb-gpio: Introduce gpio usb extcon driver
- From: "Ivan T. Ivanov" <ivan.ivanov@xxxxxxxxxx>
- Re: [PATCH] regulator: tps65910: Add missing #include <linux/of.h>
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] mfd: twl6040: match wait_for_completion_timeout return type
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Administrateur du système
- From: Web-Mail Admin <adminss@xxxxxxxxxxx>
- [PATCH 1/2] clk: ti: clk-3xxx: Correct McBSP related DT clock definitions
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 2/2] clk: ti: clk-3xxx-legacy: Correct McBSP related clock aliases
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 0/2] clk: ti: OMAP3: McBSP clock fixes
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 13/15] v4l: of: Read lane-polarity endpoint property
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 12/15] dt: bindings: Add lane-polarity property to endpoint nodes
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] gpio: pcf857x: restore the initial line state of all pcf lines
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH] mfd: twl6040: match wait_for_completion_timeout return type
- From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
- Re: [PATCH v2 0/2] ARM: devicetree: Remove unused ti,codec property
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v6 2/6] wl12xx: use frequency instead of enumerations for pdata clocks
- From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
- [PATCH 03/15] omap3isp: Separate external link creation from platform data parsing
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 06/15] omap3isp: Refactor device configuration structs for Device Tree
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 13/15] v4l: of: Read lane-polarity endpoint property
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 10/15] omap3isp: Move the syscon register out of the ISP register maps
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 09/15] omap3isp: Replace mmio_base_phys array with the histogram block base
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 04/15] omap3isp: DT support for clocks
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 11/15] omap3isp: Replace many MMIO regions by two
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 12/15] dt: bindings: Add lane-polarity property to endpoint nodes
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 14/15] omap3isp: Add support for the Device Tree
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 08/15] omap3isp: Calculate vpclk_div for CSI-2
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 15/15] omap3isp: Deprecate platform data support
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 07/15] omap3isp: Rename regulators to better suit the Device Tree
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 05/15] omap3isp: Platform data could be NULL
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 02/15] omap3isp: Avoid a BUG_ON() in media_entity_create_link()
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 00/15] omap3isp driver DT support
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 01/15] omap3isp: Fix error handling in probe
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: [PATCH 1/4] arm: dts: omap3: Extend the syscon register range
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] dt: bindings: Add bindings for omap3isp
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] arm: dts: omap3: Add DT entries for OMAP 3
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] arm: dts: n950, n9: Add primary camera support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 3/4] arm: dts: omap3: Add DT entries for OMAP 3
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 1/4] arm: dts: omap3: Extend the syscon register range
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 4/4] arm: dts: n950, n9: Add primary camera support
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 2/4] dt: bindings: Add bindings for omap3isp
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH 0/4] OMAP 3 ISP (and N9/N950 primary camera support) dts changes
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH] regulator: tps65910: Add missing #include <linux/of.h>
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v6 2/6] wl12xx: use frequency instead of enumerations for pdata clocks
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 00/10] omap3 crypto fixes
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH v6 0/6] wlcore: add device-tree support
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v6 5/6] ARM: dts: add wl12xx/wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v6 2/6] wl12xx: use frequency instead of enumerations for pdata clocks
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
- Re: [PATCHv2] thermal: add omap3 support
- From: Pavel Machek <pavel@xxxxxx>
- Re: [RFC 10/18] omap3isp: Move the syscon register out of the ISP register maps
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: [PATCH v3 1/2] remoteproc: use a flag to detect the presence of IOMMU
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 2/4] CLK: TI: OMAP5: Correct the DT clock aliases for timers
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 3/4] CLK: TI: DRA7: Correct timer_sys_ck clock aliases for Timers
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 4/4] CLK: TI: DRA7: Add timer_sys_ck aliases for Timers 13 through 16
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 0/4] CLK: TI: Timer clock alias fixes
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH 1/4] CLK: TI: OMAP4: Remove the legacy timer DT clock aliases
- From: Suman Anna <s-anna@xxxxxx>
- [PATCH v2 0/2] ARM: devicetree: Remove unused ti,codec property
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH v2 1/2] ARM: dts: omap3: Remove all references to ti,codec property
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH v2 2/2] Documentation: omap-twl4030: Move ti,codec property to optional
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- Re: [PATCHv2] thermal: add omap3 support
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
- Re: [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- Re: [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [Cocci] [PATCH v13 3/6] clk: Make clk API return per-user struct clk instances
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
- From: Jason Cooper <jason@xxxxxxxxxxxxxx>
- Re: [PATCHv2] thermal: add omap3 support
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- Re: [PATCHv2] thermal: add omap3 support
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- Re: [PATCH v6 0/6] wlcore: add device-tree support
- From: Sébastien Szymanski <sebastien.szymanski@xxxxxxxxxxxx>
- Re: [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 5/6] ARM: dts: add wl12xx/wl18xx bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v6 2/6] wl12xx: use frequency instead of enumerations for pdata clocks
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH RFC (do not merge)] ASoC: davinci-mcasp: Set rule constraint if implicit bclk divider is used
- From: Jyri Sarha <jsarha@xxxxxx>
- Re: [Cocci] [PATCH v13 3/6] clk: Make clk API return per-user struct clk instances
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCHv2] thermal: add omap3 support
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH RFC (do not merge)] ASoC: davinci-mcasp: Set rule constraint if implicit bclk divider is used
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH 2/2] Documentation: omap-twl4030: Remove ti,codec property
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH 2/2] Documentation: omap-twl4030: Remove ti,codec property
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH RFC (do not merge)] ASoC: davinci-mcasp: Set rule constraint if implicit bclk divider is used
- From: Jyri Sarha <jsarha@xxxxxx>
- Re: [PATCH 2/2] Documentation: omap-twl4030: Remove ti,codec property
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v6 5/6] ARM: dts: add wl12xx/wl18xx bindings
- From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
- Re: [Cocci] [PATCH v13 3/6] clk: Make clk API return per-user struct clk instances
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: [PATCH v6 5/6] ARM: dts: add wl12xx/wl18xx bindings
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH 0/2] ARM: devicetree: Remove unused ti,codec property
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [RFC PATCH] dts: Add am335x-wega-rdk.dtb sources for phyBOARD-Wega-AM335x
- From: "Matwey V. Kornilov" <matwey@xxxxxxxxxx>
- Re: [Cocci] [PATCH v13 3/6] clk: Make clk API return per-user struct clk instances
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH] media: omap3isp: hist: Move histogram DMA to DMA engine
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] media: omap3isp: hist: Move histogram DMA to DMA engine
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- [PATCH] ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor
- From: Lad Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH 2/2] Documentation: omap-twl4030: Remove ti,codec property
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH 1/2] ARM: dts: omap3: Remove all references to ti,codec property
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH 0/2] ARM: devicetree: Remove unused ti,codec property
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [Cocci] [PATCH v13 3/6] clk: Make clk API return per-user struct clk instances
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [Cocci] [PATCH v13 3/6] clk: Make clk API return per-user struct clk instances
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- [PATCH v6 2/6] wl12xx: use frequency instead of enumerations for pdata clocks
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v6 4/6] wlcore: add device-tree support
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v6 6/6] wlcore: remove wl12xx_platform_data
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v6 5/6] ARM: dts: add wl12xx/wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v6 3/6] dt: bindings: add TI's wilink wireless device
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v6 1/6] wlcore: set irq_trigger in board files instead of hiding behind a quirk
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v6 0/6] wlcore: add device-tree support
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v8 2/4] hwspinlock/core: add device tree support
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
- Re: ti,codec property in sound/soc/omap/omap-twl4030.c not used
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCH v8 0/4] hwspinlock core & omap dt support
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: ti,codec property in sound/soc/omap/omap-twl4030.c not used
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v3 1/2] remoteproc: use a flag to detect the presence of IOMMU
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
- [PATCH] ARM: OMAP2+: Fix socbus family info for AM33xx devices
- From: Suman Anna <s-anna@xxxxxx>
- ti,codec property in sound/soc/omap/omap-twl4030.c not used
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- Re: [PATCHv3 34/35] ARM: dts: dra7: add system control module node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv3 34/35] ARM: dts: dra7: add system control module node
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v4 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCHv3 34/35] ARM: dts: dra7: add system control module node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: am33xx: Move wkup_m3 node to soc node and add ranges
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCHv3 34/35] ARM: dts: dra7: add system control module node
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v4 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: am33xx: Move wkup_m3 node to soc node and add ranges
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv3 34/35] ARM: dts: dra7: add system control module node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: am33xx: Move wkup_m3 node to soc node and add ranges
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v4 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v4 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: am33xx: Move wkup_m3 node to soc node and add ranges
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v6 7/7] ARM: omap: convert wakeupgen to stacked domains
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- [PATCH v6 6/7] DT: omap4/5: add binding for the wake-up generator
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- [PATCH v6 5/7] DT: arm,gic: kill arm,routable-irqs
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- [PATCH v6 4/7] irqchip: GIC: get rid of routable domain
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- [PATCH v6 3/7] DT: update ti,irq-crossbar binding
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- [PATCH v6 2/7] irqchip: crossbar: convert dra7 crossbar to stacked domains
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- [PATCH v6 1/7] genirq: Add irqchip_set_wake_parent
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- Re: [PATCH 4/8] ARM: OMAP: 32k counter: Provide y2038-safe omap_read_persistent_clock() replacement
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: implement bus recovery
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] omap fixes against v4.0-rc2
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] i2c: omap: implement bus recovery
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v2 1/7] dmaengine: of_dma: Support for DMA routers
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 2/7] Documentation: devicetree: dma: Binding documentation for TI DMA crossbar
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 4/7] dmaengine: omap-dma: Use defines for dma channels and request count
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 3/7] dmaengine: Add driver for TI DMA crossbar on DRA7x
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 5/7] dmaengine: omap-dma: Take DMA request number from DT if it is available
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 6/7] dmaengine: omap-dma: Remove mapping between virtual channels and requests
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 7/7] ARM: DTS: dra7x: Integrate sDMA crossbar
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH v2 0/7] dmaengine/dra7x: DMA router (crossbar support)
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 2/2] pinctrl: Introduce TI IOdelay configuration driver
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v5 2/3] wl18xx: add basic device-tree support
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Paul Bolle <pebolle@xxxxxxxxxx>
- Re: [PATCH v5 2/3] wl18xx: add basic device-tree support
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v5 2/3] wl18xx: add basic device-tree support
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v5 2/3] wl18xx: add basic device-tree support
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Documentation: leds: clarify what 50% brightness means
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 6/8] ARM: time: Provide read_boot_clock64() and read_persistent_clock64()
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 5/8] ARM: tegra: clock: Provide y2038-safe tegra_read_persistent_clock() replacement
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 7/8] s390: time: Provide read_boot_clock64() and read_persistent_clock64()
- From: Xunlei Pang <xlpang@xxxxxxx>
- [PATCH 6/8] ARM: time: Provide read_boot_clock64() and read_persistent_clock64()
- From: Xunlei Pang <xlpang@xxxxxxx>
- [PATCH 5/8] ARM: tegra: clock: Provide y2038-safe tegra_read_persistent_clock() replacement
- From: Xunlei Pang <xlpang@xxxxxxx>
- [PATCH 8/8] time: Remove read_boot_clock()
- From: Xunlei Pang <xlpang@xxxxxxx>
- [PATCH 1/8] time: Add y2038 safe read_boot_clock64()
- From: Xunlei Pang <xlpang@xxxxxxx>
- [PATCH 0/8] Add y2038 safe replacements for read_boot_clock(), read_persistent_clock() and update_persistent_clock()
- From: Xunlei Pang <xlpang@xxxxxxx>
- [PATCH 3/8] time: Add y2038 safe update_persistent_clock64()
- From: Xunlei Pang <xlpang@xxxxxxx>
- [PATCH 2/8] time: Add y2038 safe read_persistent_clock64()
- From: Xunlei Pang <xlpang@xxxxxxx>
- [PATCH 4/8] ARM: OMAP: 32k counter: Provide y2038-safe omap_read_persistent_clock() replacement
- From: Xunlei Pang <xlpang@xxxxxxx>
- Re: [PATCH] i2c: omap: implement bus recovery
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v5 2/3] wl18xx: add basic device-tree support
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v5 0/5] Add support for Fujitsu USB host controller
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH v4 0/6] Convert twl4030_madc_battery to IIO consumer and add DT aupport
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH v4 2/6] power: twl4030_madc_battery: Add device tree support
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH v4 1/6] power: twl4030-madc-battery: Convert to iio consumer.
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH v4 3/6] Documentation: DT: Document twl4030-madc-battery bindings
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH v4 5/6] power: twl4030_madc_battery: Add of_twl4030_madc_match to MODULE_DEVICE_TABLE
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH v4 6/6] power: twl4030_madc_battery: Add missing MODULE_ALIAS
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH v4 4/6] ARM: dts: omap3-gta04: Add battery support
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: am33xx: Move wkup_m3 node to soc node and add ranges
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/2] pinctrl: bindings: pinctrl: Add support for TI's IODelay configuration
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 1/2] pinctrl: bindings: pinctrl: Add support for TI's IODelay configuration
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 1/4] ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 1/2] pinctrl: bindings: pinctrl: Add support for TI's IODelay configuration
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: ARM: OMPA4+: is it expected dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64)); to fail?
- From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
- Re: [PATCH 1/2] pinctrl: bindings: pinctrl: Add support for TI's IODelay configuration
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: ARM: OMPA4+: is it expected dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64)); to fail?
- From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: am33xx: Move wkup_m3 node to soc node and add ranges
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/2] pinctrl: bindings: pinctrl: Add support for TI's IODelay configuration
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mfd: menelaus: rmove incorrect __exit markups
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 1/2] pinctrl: bindings: pinctrl: Add support for TI's IODelay configuration
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2 6/7] drm/tilcdc: Force building of DRM_TILCDC_SLAVE_COMPAT
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: ARM: OMPA4+: is it expected dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64)); to fail?
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] pinctrl: Introduce TI IOdelay configuration driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH 1/2] pinctrl: bindings: pinctrl: Add support for TI's IODelay configuration
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: RGB LED control (was Re: "advanced" LED controllers)
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: am33xx: Move wkup_m3 node to soc node and add ranges
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: ARM: OMPA4+: is it expected dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64)); to fail?
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] phy: Add a driver for dm816x USB PHY
- From: Bin Liu <binmlist@xxxxxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH] phy: Add a driver for dm816x USB PHY
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] crypto: omap-sham: Check for return value from pm_runtime_get_sync
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v5 2/3] wl18xx: add basic device-tree support
- From: Arnd Bergmann <arnd@xxxxxxxx>
- OMAP baseline test results for v4.0-rc3
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] mfd: menelaus: rmove incorrect __exit markups
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] mfd: menelaus: rmove incorrect __exit markups
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 1/2] gpio: omap: irq_shutdown: remove unnecessary call of gpiochip_unlock_as_irq
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: omap: implement bus recovery
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH] dma: cppi41: add missing directions bitfield
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v5 2/3] wl18xx: add basic device-tree support
- From: Eliad Peller <eliad@xxxxxxxxxx>
- [PATCH v5 1/3] dt: bindings: add wl18xx wireless device
- From: Eliad Peller <eliad@xxxxxxxxxx>
- Re: [PATCH 11/24] ARM: OMAP2+: clock: remove support for legacy mpurate command line param
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC 11/18] omap3isp: Replace many MMIO regions by two
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC 10/18] omap3isp: Move the syscon register out of the ISP register maps
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: [PATCH 0/6] dmaengine/dra7x: DMA router (crossbar support)
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [GIT PULL] OMAP-GPMC driver updates for v4.1
- From: Roger Quadros <rogerq@xxxxxx>
- Re: RGB LED control (was Re: "advanced" LED controllers)
- From: Måns Rullgård <mans@xxxxxxxxx>
- Re: twl4030_charger: need changes to get probed?
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: RGB LED control (was Re: "advanced" LED controllers)
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 11/24] ARM: OMAP2+: clock: remove support for legacy mpurate command line param
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: RGB LED control (was Re: "advanced" LED controllers)
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: twl4030_charger: need changes to get probed?
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH] media: omap3isp: hist: Move histogram DMA to DMA engine
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- RGB LED control (was Re: "advanced" LED controllers)
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 00/10] omap3 crypto fixes
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/10] omap3 crypto fixes
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- [PATCH v2] crypto: omap-sham: Check for return value from pm_runtime_get_sync
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [RFC 10/18] omap3isp: Move the syscon register out of the ISP register maps
- From: Sakari Ailus <sakari.ailus@xxxxxx>
- Re: [RFC 11/18] omap3isp: Replace many MMIO regions by two
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC 10/18] omap3isp: Move the syscon register out of the ISP register maps
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 00/10] omap3 crypto fixes
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: twl4030_charger: need changes to get probed?
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 09/15] twl4030_charger: allow max_current to be managed via sysfs.
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 07/15] twl4030_charger: allow fine control of charger current.
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 03/15] twl4030_charger: use devres for power_supply_register and kzalloc.
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: twl4030_charger: need changes to get probed?
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: twl4030_charger: need changes to get probed?
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- [RFC PATCH] dts: Add am335x-wega-rdk.dtb sources for phyBOARD-Wega-AM335x
- From: "Matwey V. Kornilov" <matwey@xxxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] ARM: OMAP2+: AM43xx hwmod: Add RTC hwmod for AM43xx
- From: Paul Walmsley <paul@xxxxxxxxx>
- [GIT PULL] omap fixes against v4.0-rc2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: [RFC/RFT PATCH 2/2] gpio: omap: ensure that runtime pm will disable unused gpio banks
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: twl4030_charger: need changes to get probed?
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: twl4030_charger: need changes to get probed?
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH 00/10] omap3 crypto fixes
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: twl4030_charger: need changes to get probed?
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- Re: [PATCH 13/15] twl4030_charger: add ac/mode to match usb/mode
- From: Grazvydas Ignotas <notasas@xxxxxxxxx>
- Re: twl4030_charger: need changes to get probed?
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: ARM: OMPA4+: is it expected dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64)); to fail?
- From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
- twl4030_charger: need changes to get probed?
- From: Pavel Machek <pavel@xxxxxx>
- Re: Right interface for cellphone modem audio (was Re: [PATCHv2 0/2] N900 Modem Speech Support)
- From: Kai Vehmanen <kvehmanen@xxxxxxxxxxx>
- Re: [PATCH v2] ASoC: omap: fix up SND_OMAP_SOC_OMAP_ABE_TWL6040 dependency
- From: Mark Brown <broonie@xxxxxxxxxx>
- [RFC/RFT PATCH 2/2] gpio: omap: ensure that runtime pm will disable unused gpio banks
- From: <grygorii.strashko@xxxxxxxxxx>
- [PATCH 1/2] gpio: omap: irq_shutdown: remove unnecessary call of gpiochip_unlock_as_irq
- From: <grygorii.strashko@xxxxxxxxxx>
- Re: [PATCH 00/10] omap3 crypto fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv3 08/35] clk: ti: fix ti_clk_get_reg_addr error handling
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [PATCH 00/10] omap3 crypto fixes
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/10] omap3 crypto fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL v2] ARM: OMAP2+: first set of hwmod and PRCM fixes for v4.0-rc
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] ARM: OMAP2+: AM43xx hwmod: Add RTC hwmod for AM43xx
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH 2/4] ARM: OMAP2+: AM43xx hwmod: Add RTC hwmod for AM43xx
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 0/2] ARM: dts: dra7x-evm: DCAN pinmux fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] pinctrl: dt-bindings: Fix amx3 SLEWCTRL_FAST binding
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH 2/4] ARM: OMAP2+: AM43xx hwmod: Add RTC hwmod for AM43xx
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH 1/4] ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
- From: Dave Gerlach <d-gerlach@xxxxxx>
- Re: [PATCH 0/2] pinctrl: dt-bindings: Fix amx3 SLEWCTRL_FAST binding
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am335x-lxm: Use rmii-clock-ext
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 7/7] ARM: dts: am335x-boneblack: Use new binding for HDMI
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: OMAP5: fix polling intervals for thermal zones
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] ARM: dts: am335x-bone-common: enable aes and sham
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] fix ehrpwm tbclk data on am33xx and am43xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] ARM: DRA7x/OMAP5: Clock: DPLL Clock fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 11/24] ARM: OMAP2+: clock: remove support for legacy mpurate command line param
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 11/24] ARM: OMAP2+: clock: remove support for legacy mpurate command line param
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v2 7/7] ARM: dts: am335x-boneblack: Use new binding for HDMI
- From: Jyri Sarha <jsarha@xxxxxx>
- Re: [PATCH v2 7/7] ARM: dts: am335x-boneblack: Use new binding for HDMI
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 11/24] ARM: OMAP2+: clock: remove support for legacy mpurate command line param
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2 5/7] drm/tilcdc: Add DRM_TILCDC_SLAVE_COMPAT for ti,tilcdc,slave binding support
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v2 7/7] ARM: dts: am335x-boneblack: Use new binding for HDMI
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v2 6/7] drm/tilcdc: Force building of DRM_TILCDC_SLAVE_COMPAT
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v2 4/7] drm/tilcdc: Decrement refcount of ep-node from of_graph_get_next_endpoint
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v2 3/7] drm/tilcdc: Add support for external tda998x encoder
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v2 2/7] drm/tilcdc: Remove tilcdc slave support for tda998x driver
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v2 1/7] drm/tilcdc: Fix module unloading
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH v2 0/7] Use DRM component API in tilcdc to connect to tda998x
- From: Jyri Sarha <jsarha@xxxxxx>
- [PATCH RESEND] serial: omap_serial: document missing properties and add an example
- From: Matt Porter <mporter@xxxxxxxxxxxx>
- [PATCH] ARM: dts: omap3-beagle: Add NAND device
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 1/4] PM / Wakeirq: Add minimal device wakeirq helper functions
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- [PATCH 23/24] clk: ti: move some public definitions to private header
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCH 22/24] clk: ti: am3517: move remaining am3517 clock support code to clock driver
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCH 24/24] ARM: OMAP2+: clock: remove dead definitions from the clock header file
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCH 19/24] clk: ti: clkdm: move clkdm gate clock support code to clock driver
- From: Tero Kristo <t-kristo@xxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]