On Thu, Apr 09, 2015 at 12:35:46PM +0300, Peter Ujfalusi wrote: > Vinod: is it OK if I send the Documnetation/dmanegine/ update a bit later when > I have finished it? > > Changes since v4: > - Comments from Maxime Ripard addressed: > - long line fixed in of-dma.c > - node leaks has been fixed in ti-dma-crossbar > - Using devm_ioremap_resource() in ti-dma-crossbar > - u16 casting has been addressed > - Router drivers are expected to return with ERR_PTR in case their > of_dma_route_allocate() callback fails. > > Changes since v3: > - Comments from Russell: > - Warnings removed in case of non DT boot when taking the DMA request number > - Reduced the number of channels presented to DMAengine > - removed the dma_sig parameter from omap_dma_chan_init() > - Comments from Arnd: > - dma-device property renamed to dma-masters > - Allow list of phandes in dma-masters > > Changes since v2: > - not using regmap for the TI crossbar driver. > > Changes since v1: > - Comments from Russell King and Paul Bolle addressed: > - Use the added defined in the omap-dma changes > - MODULE_* removed from the ti-dma-crossbar driver. > - DMA router documentation: do not limit the #dma-cells to be the same as the > dma controller's #dma-cells. It might be possible to have a router which needs > more information than the DMA controller (direct request pairing for example) > - Use defines in the ti-dma-crossbar driver > - Binding document for the ti-dma-crossbar driver > > Intro mail from v1: > > The series adds support for DMA router type of devices. They are used in SoCs > which has more peripherals with DMA request lines than the DMA controller can > handle. > The router itself is not part of the DMA controller and it's operation should be > transparent (as it is in the HW) for the SW stack. > > This series takes into accound the comments Sricharan received for his version > of the crossbar driver: > https://lkml.org/lkml/2014/3/7/199 > > This implementation is not tied to any DMA driver so it is possible to use the > framework by other vendors, also ACPI version of binding can be easy enough to > be added. I have applied all but last change to topic/omap Thanks -- ~Vinod -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
