Re: AM335x OMAP2 common clock external fixed-clock registration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 15, 2015 at 09:43:30PM +0300, Tero Kristo wrote:
> On 04/15/2015 05:09 PM, Michael Welling wrote:
> >On Wed, Apr 15, 2015 at 09:34:48AM +0300, Tero Kristo wrote:
> >>On 04/15/2015 12:17 AM, Michael Welling wrote:
> >>>Greetings,
> >>>
> >>>I have developed an AM3354 based SoM and it uses an external SI5351 clock
> >>>generator to drive the clock inputs for an external duart and I2S audio
> >>>master clock. With the registration according to the documentation the
> >>>reference clock is not being detected and hence the clock generator is
> >>>not working as expect.
> >>>
> >>>After trying many different things, I started to look around the mailing
> >>>lists to find information related to this issue.
> >>>
> >>>I came acrossed post that has the exact same issue:
> >>>https://lkml.org/lkml/2013/2/18/468
> >>>
> >>>Seeing as the patch did not land upstream, I am wondering if there is
> >>>a solution that I am not seeing.
> >>>
> >>>I am willing to provide a patch given appropriate guidance.
> >>
> >>Hi Michael,
> >>
> >>The info on the email you referenced is kind of obsolete, TI SoCs
> >>are calling of_clk_init() during boot now, and thus external clock
> >>nodes should be registered fine also. Maybe you can provide the
> >>actual DTS patch you are trying out so we can help better...? Are
> >
> >See attached patch and console output.
> 
> I see a bug in your dt data.
> 
> <snip>
> 
> +	clocks {
> +		ref27: ref27 {
> +			#clock-cells = <0>;
> +			compatibale = "fixed-clock";
> 
> This should be compatible, right? DT is annoying in that it doesn't
> verify property names.
>

Ooops.

Now the clock appears in /sys/kernel/debug/clk:
root@som3517-som200:/sys/kernel/debug/clk# cat clk_summary 
   clock                         enable_cnt  prepare_cnt        rate   accuracy   phase
----------------------------------------------------------------------------------------
 ref27                                    0            0    27000000          0 0  
...

There is still an issue with the si5351.

I had to comment out the clk_put here for the frequency to show up:
http://lxr.free-electrons.com/source/drivers/clk/clk-si5351.c#L1133

Ideas?

> +			clock-frequency = <27000000>;
> +		};
> +	};
> 
> -Tero
> 
> >
> >>you seeing any boot time error / warning prints for your new clock?
> >
> >With the debug messages on you see that the reference clock is not being
> >detected.
> >
> >Whilest debugging I found that the of_clk_get is returning an error no matter
> >which clock I pass it:
> >http://lxr.free-electrons.com/source/drivers/clk/clk-si5351.c#L1131
> >
> >>
> >>-Tero
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux