We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.
This board has support for device tree based booting, and we've been
printing warnings about the legacy booting being deprecated for a
few merge cycles now. Let's attempt to remove the legacy booting
for it.
The reason for removing the legacy booting support now rather than
later is we can simply revert this patch if necessary if we run
into some unexpected issues that are not trivial to fix for the
device tree based booting.
Cc: Dmitry Lifshitz <lifshitz@xxxxxxxxxxxxxx>
Cc: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/Kconfig | 10 -
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/board-cm-t35.c | 769 -------------------------------------
3 files changed, 780 deletions(-)
delete mode 100644 arch/arm/mach-omap2/board-cm-t35.c
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 6468f15..8b3aa4c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -240,16 +240,6 @@ config MACH_NOKIA_RX51
default y
select OMAP_PACKAGE_CBB
-config MACH_CM_T35
- bool "CompuLab CM-T35/CM-T3730 modules"
- depends on ARCH_OMAP3
- default y
- select MACH_CM_T3730
- select OMAP_PACKAGE_CUS
-
-config MACH_CM_T3730
- bool
-
config OMAP3_SDRC_AC_TIMING
bool "Enable SDRC AC timing register changes"
depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ec002bd..ff634a1 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -252,7 +252,6 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o
-obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
# Platform specific device init code
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
deleted file mode 100644
index b5dfbc1..0000000
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ /dev/null
@@ -1,769 +0,0 @@
-/*
- * CompuLab CM-T35/CM-T3730 modules support
- *
- * Copyright (C) 2009-2011 CompuLab, Ltd.
- * Authors: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- * Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/omap-gpmc.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <linux/platform_data/at24.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/tdo24m.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include "common.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define CM_T35_GPIO_PENDOWN 57
-#define SB_T35_USB_HUB_RESET_GPIO 167
-
-#define CM_T35_SMSC911X_CS 5
-#define CM_T35_SMSC911X_GPIO 163
-#define SB_T35_SMSC911X_CS 4
-#define SB_T35_SMSC911X_GPIO 65
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
- .id = 0,
- .cs = CM_T35_SMSC911X_CS,
- .gpio_irq = CM_T35_SMSC911X_GPIO,
- .gpio_reset = -EINVAL,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
- .id = 1,
- .cs = SB_T35_SMSC911X_CS,
- .gpio_irq = SB_T35_SMSC911X_GPIO,
- .gpio_reset = -EINVAL,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-static void __init cm_t35_init_ethernet(void)
-{
- regulator_register_fixed(0, cm_t35_smsc911x_supplies,
- ARRAY_SIZE(cm_t35_smsc911x_supplies));
- regulator_register_fixed(1, sb_t35_smsc911x_supplies,
- ARRAY_SIZE(sb_t35_smsc911x_supplies));
-
- gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
- gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
-}
-#else
-static inline void __init cm_t35_init_ethernet(void) { return; }
-#endif
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led cm_t35_leds[] = {
- [0] = {
- .gpio = 186,
- .name = "cm-t35:green",
- .default_trigger = "heartbeat",
- .active_low = 0,
- },
-};
-
-static struct gpio_led_platform_data cm_t35_led_pdata = {
- .num_leds = ARRAY_SIZE(cm_t35_leds),
- .leds = cm_t35_leds,
-};
-
-static struct platform_device cm_t35_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &cm_t35_led_pdata,
- },
-};
-
-static void __init cm_t35_init_led(void)
-{
- platform_device_register(&cm_t35_led_device);
-}
-#else
-static inline void cm_t35_init_led(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-static struct mtd_partition cm_t35_nand_partitions[] = {
- {
- .name = "xloader",
- .offset = 0, /* Offset = 0x00000 */
- .size = 4 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE
- },
- {
- .name = "uboot",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 15 * NAND_BLOCK_SIZE,
- },
- {
- .name = "uboot environment",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
- .size = 2 * NAND_BLOCK_SIZE,
- },
- {
- .name = "linux",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */
- .size = 32 * NAND_BLOCK_SIZE,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct omap_nand_platform_data cm_t35_nand_data = {
- .parts = cm_t35_nand_partitions,
- .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions),
- .cs = 0,
-};
-
-static void __init cm_t35_init_nand(void)
-{
- if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
- pr_err("CM-T35: Unable to register NAND device\n");
-}
-#else
-static inline void cm_t35_init_nand(void) {}
-#endif
-
-#define CM_T35_LCD_EN_GPIO 157
-#define CM_T35_LCD_BL_GPIO 58
-#define CM_T35_DVI_EN_GPIO 54
-
-static const struct display_timing cm_t35_lcd_videomode = {
- .pixelclock = { 0, 26000000, 0 },
-
- .hactive = { 0, 480, 0 },
- .hfront_porch = { 0, 104, 0 },
- .hback_porch = { 0, 8, 0 },
- .hsync_len = { 0, 8, 0 },
-
- .vactive = { 0, 640, 0 },
- .vfront_porch = { 0, 4, 0 },
- .vback_porch = { 0, 2, 0 },
- .vsync_len = { 0, 2, 0 },
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
- DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
-};
-
-static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
- .name = "lcd",
- .source = "dpi.0",
-
- .data_lines = 18,
-
- .display_timing = &cm_t35_lcd_videomode,
-
- .enable_gpio = -1,
- .backlight_gpio = CM_T35_LCD_BL_GPIO,
-};
-
-static struct platform_device cm_t35_lcd_device = {
- .name = "panel-dpi",
- .id = 0,
- .dev.platform_data = &cm_t35_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = -1,
-};
-
-static struct platform_device cm_t35_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &cm_t35_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = CM_T35_DVI_EN_GPIO,
-};
-
-static struct platform_device cm_t35_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &cm_t35_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data cm_t35_tv_pdata = {
- .name = "tv",
- .source = "venc.0",
- .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .invert_polarity = false,
-};
-
-static struct platform_device cm_t35_tv_connector_device = {
- .name = "connector-analog-tv",
- .id = 0,
- .dev.platform_data = &cm_t35_tv_pdata,
-};
-
-static struct omap_dss_board_info cm_t35_dss_data = {
- .default_display_name = "dvi",
-};
-
-static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
- .turbo_mode = 0,
-};
-
-static struct tdo24m_platform_data tdo24m_config = {
- .model = TDO35S,
-};
-
-static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
- {
- .modalias = "tdo24m",
- .bus_num = 4,
- .chip_select = 0,
- .max_speed_hz = 1000000,
- .controller_data = &tdo24m_mcspi_config,
- .platform_data = &tdo24m_config,
- },
-};
-
-static void __init cm_t35_init_display(void)
-{
- int err;
-
- spi_register_board_info(cm_t35_lcd_spi_board_info,
- ARRAY_SIZE(cm_t35_lcd_spi_board_info));
-
-
- err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,
- "lcd bl enable");
- if (err) {
- pr_err("CM-T35: failed to request LCD EN GPIO\n");
- return;
- }
-
- msleep(50);
- gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
-
- err = omap_display_init(&cm_t35_dss_data);
- if (err) {
- pr_err("CM-T35: failed to register DSS device\n");
- gpio_free(CM_T35_LCD_EN_GPIO);
- }
-
- platform_device_register(&cm_t35_tfp410_device);
- platform_device_register(&cm_t35_dvi_connector_device);
- platform_device_register(&cm_t35_lcd_device);
- platform_device_register(&cm_t35_tv_connector_device);
-}
-
-static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
- REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
- REGULATOR_SUPPLY("vcc", "spi1.0"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data cm_t35_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply),
- .consumer_supplies = cm_t35_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data cm_t35_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply),
- .consumer_supplies = cm_t35_vsim_supply,
-};
-
-static struct regulator_init_data cm_t35_vio = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE,
- },
- .num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies),
- .consumer_supplies = cm_t35_vio_supplies,
-};
-
-static uint32_t cm_t35_keymap[] = {
- KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT),
- KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN),
- KEY(2, 0, KEY_RIGHT), KEY(2, 1, KEY_C), KEY(2, 2, KEY_D),
-};
-
-static struct matrix_keymap_data cm_t35_keymap_data = {
- .keymap = cm_t35_keymap,
- .keymap_size = ARRAY_SIZE(cm_t35_keymap),
-};
-
-static struct twl4030_keypad_data cm_t35_kp_data = {
- .keymap_data = &cm_t35_keymap_data,
- .rows = 3,
- .cols = 3,
- .rep = 1,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .deferred = true,
- },
- {
- .mmc = 2,
- .caps = MMC_CAP_4_BIT_DATA,
- .transceiver = 1,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .ocr_mask = 0x00100000, /* 3.3V */
- },
- {} /* Terminator */
-};
-
-static struct usbhs_phy_data phy_data[] __initdata = {
- {
- .port = 1,
- .reset_gpio = OMAP_MAX_GPIO_LINES + 6,
- .vcc_gpio = -EINVAL,
- },
- {
- .port = 2,
- .reset_gpio = OMAP_MAX_GPIO_LINES + 7,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static void __init cm_t35_init_usbh(void)
-{
- int err;
-
- err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO,
- GPIOF_OUT_INIT_LOW, "usb hub rst");
- if (err) {
- pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err);
- } else {
- udelay(10);
- gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
- msleep(1);
- }
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- usbhs_init(&usbhs_bdata);
-}
-
-static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
- unsigned ngpio)
-{
- int wlan_rst = gpio + 2;
-
- if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) {
- gpio_export(wlan_rst, 0);
- udelay(10);
- gpio_set_value_cansleep(wlan_rst, 0);
- udelay(10);
- gpio_set_value_cansleep(wlan_rst, 1);
- } else {
- pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
- }
-
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap_hsmmc_late_init(mmc);
-
- return 0;
-}
-
-static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
- .setup = cm_t35_twl_gpio_setup,
-};
-
-static struct twl4030_power_data cm_t35_power_data = {
- .use_poweroff = true,
-};
-
-static struct twl4030_platform_data cm_t35_twldata = {
- /* platform_data for children goes here */
- .keypad = &cm_t35_kp_data,
- .gpio = &cm_t35_gpio_data,
- .vmmc1 = &cm_t35_vmmc1,
- .vsim = &cm_t35_vsim,
- .vio = &cm_t35_vio,
- .power = &cm_t35_power_data,
-};
-
-#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
-#include <media/omap3isp.h>
-#include "devices.h"
-
-static struct isp_platform_subdev cm_t35_isp_subdevs[] = {
- {
- .board_info = &(struct i2c_board_info){
- I2C_BOARD_INFO("mt9t001", 0x5d)
- },
- .i2c_adapter_id = 3,
- .bus = &(struct isp_bus_cfg){
- .interface = ISP_INTERFACE_PARALLEL,
- .bus = {
- .parallel = {
- .clk_pol = 1,
- },
- },
- },
- },
- {
- .board_info = &(struct i2c_board_info){
- I2C_BOARD_INFO("tvp5150", 0x5c),
- },
- .i2c_adapter_id = 3,
- .bus = &(struct isp_bus_cfg){
- .interface = ISP_INTERFACE_PARALLEL,
- .bus = {
- .parallel = {
- .clk_pol = 0,
- },
- },
- },
- },
- { 0 },
-};
-
-static struct isp_platform_data cm_t35_isp_pdata = {
- .subdevs = cm_t35_isp_subdevs,
-};
-
-static struct regulator_consumer_supply cm_t35_camera_supplies[] = {
- REGULATOR_SUPPLY("vaa", "3-005d"),
- REGULATOR_SUPPLY("vdd", "3-005d"),
-};
-
-static void __init cm_t35_init_camera(void)
-{
- struct clk *clk;
-
- clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT,
- 48000000);
- clk_register_clkdev(clk, NULL, "3-005d");
-
- regulator_register_fixed(2, cm_t35_camera_supplies,
- ARRAY_SIZE(cm_t35_camera_supplies));
-
- if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
- pr_warn("CM-T3x: Failed registering camera device!\n");
-}
-
-#else
-static inline void cm_t35_init_camera(void) {}
-#endif /* CONFIG_VIDEO_OMAP3 */
-
-static void __init cm_t35_init_i2c(void)
-{
- omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
- TWL_COMMON_REGULATOR_VDAC |
- TWL_COMMON_PDATA_AUDIO);
-
- omap3_pmic_init("tps65930", &cm_t35_twldata);
-
- omap_register_i2c_bus(3, 400, NULL, 0);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- /* nCS and IRQ for CM-T35 ethernet */
- OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
- OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
- /* nCS and IRQ for SB-T35 ethernet */
- OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0),
- OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
- /* PENDOWN GPIO */
- OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
- /* mUSB */
- OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* MMC 2 */
- OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-
- /* McSPI 1 */
- OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-
- /* McSPI 4 */
- OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
-
- /* McBSP 2 */
- OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
- /* serial ports */
- OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* common DSS */
- OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
- /* Camera */
- OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
-
- /* display controls */
- OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
- /* TPS IRQ */
- OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
- OMAP_PIN_INPUT_PULLUP),
-
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static void __init cm_t3x_common_dss_mux_init(int mux_mode)
-{
- omap_mux_init_signal("dss_data18", mux_mode);
- omap_mux_init_signal("dss_data19", mux_mode);
- omap_mux_init_signal("dss_data20", mux_mode);
- omap_mux_init_signal("dss_data21", mux_mode);
- omap_mux_init_signal("dss_data22", mux_mode);
- omap_mux_init_signal("dss_data23", mux_mode);
-}
-
-static void __init cm_t35_init_mux(void)
-{
- int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT;
-
- omap_mux_init_signal("dss_data0.dss_data0", mux_mode);
- omap_mux_init_signal("dss_data1.dss_data1", mux_mode);
- omap_mux_init_signal("dss_data2.dss_data2", mux_mode);
- omap_mux_init_signal("dss_data3.dss_data3", mux_mode);
- omap_mux_init_signal("dss_data4.dss_data4", mux_mode);
- omap_mux_init_signal("dss_data5.dss_data5", mux_mode);
- cm_t3x_common_dss_mux_init(mux_mode);
-}
-
-static void __init cm_t3730_init_mux(void)
-{
- int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT;
-
- omap_mux_init_signal("sys_boot0", mux_mode);
- omap_mux_init_signal("sys_boot1", mux_mode);
- omap_mux_init_signal("sys_boot3", mux_mode);
- omap_mux_init_signal("sys_boot4", mux_mode);
- omap_mux_init_signal("sys_boot5", mux_mode);
- omap_mux_init_signal("sys_boot6", mux_mode);
- cm_t3x_common_dss_mux_init(mux_mode);
-}
-#else
-static inline void cm_t35_init_mux(void) {}
-static inline void cm_t3730_init_mux(void) {}
-#endif
-
-static void __init cm_t3x_common_init(void)
-{
- omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
- omap_serial_init();
- omap_sdrc_init(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- omap_hsmmc_init(mmc);
- cm_t35_init_i2c();
- omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
- cm_t35_init_ethernet();
- cm_t35_init_led();
- cm_t35_init_display();
- omap_twl4030_audio_init("cm-t3x", NULL);
-
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
- cm_t35_init_usbh();
- cm_t35_init_camera();
-}
-
-static void __init cm_t35_init(void)
-{
- cm_t3x_common_init();
- cm_t35_init_mux();
- cm_t35_init_nand();
-}
-
-static void __init cm_t3730_init(void)
-{
- cm_t3x_common_init();
- cm_t3730_init_mux();
-}
-
-MACHINE_START(CM_T35, "Compulab CM-T35")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap35xx_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = cm_t35_init,
- .init_late = omap35xx_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(CM_T3730, "Compulab CM-T3730")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3630_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = cm_t3730_init,
- .init_late = omap3630_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
