Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- [PATCH 2/6] iio: imu: adis16480: Add support for configurable drdy indicator, (continued)
- [PATCH 0/5] iio:potentiostat:lmp91000: Adjust codestyle, and minor cleanup changes,
Lucas Oshiro
- [PATCH 1/8] include/fsl: add common FlexTimer #defines in a separate header.,
Patrick Havelange
- [PATCH] iio: remove redundant unlikely annotation,
Chengguang Xu
- [PATCH -next] iio: adc: ingenic: remove redundant dev_err call in ingenic_adc_probe(),
Wei Yongjun
- [PATCH 0/2] iio: chemical: pms7003: add other supported sensors,
Tomasz Duszynski
- [PATCH 1/7] iio: inkern: API for reading available iio channel attribute values,
Artur Rojek
- [PATCH] iio: chemical: sps30: fix attribute kernel version,
Tomasz Duszynski
- [PATCH] iio/chemical/bme680: Fix SPI read interface,
Mike Looijmans
- [PATCH v2 1/2] staging: iio: frequency: ad9834: Move frequency to standard iio types,
Beniamin Bia
- [PATCH] iio: trigger: Print an error if there is no available irq,
Mathieu Othacehe
- [PATCH] Staging: iio: meter: fixed typo,
Leonard Pollak
- [PATCH v3] iio: adc: ti-ads7950: add GPIO support,
justinpopo6
- [PATCH] iio: chemical: sps30: mark expected switch fall-throughs,
Gustavo A. R. Silva
- [PATCH v2] iio: adc: ti-ads7950: add GPIO support,
justinpopo6
- [PATCH] Staging: iio: meter: fixed iio_attr_ipeak pointing to vpeak register,
Leonard Pollak
- [PULL] IIO second set of new device support, cleanups and features for the 5.1 cycle.,
Jonathan Cameron
- [PATCH 0/2] ARM/dts/iio: exynos-adc: Use proper number of channels for Exynos4x12,
Krzysztof Kozlowski
- bme680 gas sensor channel attributes,
David Frey
- [PATCH] iio/gyro/bmg160: Use millidegrees for temperature scale,
Mike Looijmans
- [PATCH] staging: iio: ad5933: move out of staging,
Marcelo Schmitt
- [PATCH v1 1/1] dt-binding: iio: remove rst node from NPCM ADC document,
Tomer Maimon
- [PATCH 1/3] iio: light: Add driver for ap3216c,
Robert Eshleman
- [PATCH] iio:chemical:sps30 Suppress some switch fallthrough warnings.,
Jonathan Cameron
- Re: [PATCH 2/2] staging: iio: frequency: ad9834: Move phase and scale to standard iio attribute, Jonathan Cameron
- [PATCH v4 0/3] add support for PMS7003 PM sensor,
Tomasz Duszynski
- Re: [PATCH 3/5] iio:adc:lpc32xx use SPDX-License-Identifier, Jonathan Cameron
- Re: [PATCH 2/5] dt-bindings: iio: adc: lpc32xx-adc: Document vref-supply, Jonathan Cameron
- Re: [PATCH 1/5] dt-bindings: iio: adc: move lpc32xx-adc out of staging, Jonathan Cameron
- [PATCH v2] iio:accel:adxl345: Change alignment to match paranthesis,
Luciana da Costa Marques
- [PATCH] iio: chemical: sps30: fix a loop timeout test,
Dan Carpenter
- [PATCH] iio: adc: exynos-adc: Fix NULL pointer exception on unbind,
Krzysztof Kozlowski
- [PATCH] iio: adc: ti-ads7950: add GPIO support,
justinpopo6
- [PATCH] iio: adc: ads124s08: fix spelling mistake "converions" -> "conversions",
Colin King
- [PATCH 1/2] staging: iio: frequency: ad9834: Move frequency to standard iio types,
Beniamin Bia
- bug: i2c-INVN6500:00: unexpected HID descriptor bcdVersion (0xca9b),
Tj
- [PATCH v2 0/5] iio: gyro: add fxas2100x driver,
Rui Miguel Silva
- [PATCH v3 0/4] staging: iio: ad7780: move out of staging,
Renato Lui Geh
- [PATCH 0/4] Add PM support to STM32 LP Timer drivers,
Fabrice Gasnier
- [PATCH 0/5] iio: gyro: add fxas2100x driver,
Rui Miguel Silva
- [PATCH v4 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612,
Ricardo Ribalda Delgado
- [PATCH v4] iio: adc: ad7476: Add support for TI ADS786X ADCs,
Ricardo Ribalda Delgado
- [PATCH] iio: adc: ad7768-1: Add support for setting the sampling frequency,
Stefan Popa
- [PATCH v2] drivers: iio: dac: Fix wrong license for ADI drivers,
Stefan Popa
- [PATCH v2 1/3] dt-bindings: iio/adc: Add docs for Ingenic JZ47xx SoCs ADC.,
Artur Rojek
- [PULL] First set of IIO new device support etc for 5.1,
Jonathan Cameron
- [PATCH v4 0/6] iio:bmi160: add drdy interrupt support,
Martin Kelly
- [PULL] First set of IIO fixes for the 5.0 cycle.,
Jonathan Cameron
- Re: [PATCH v2 2/2] staging: iio: frequency: ad9833: Load clock using clock framework, Jonathan Cameron
- Re: [PATCH v2 1/2] staging: iio: frequency: ad9833: Get frequency value statically, Jonathan Cameron
- [PATCH] iio: chemical: sps30: remove printk format specifier,
Tomasz Duszynski
- [PATCH v3 0/3] add support for PMS7003 PM sensor,
Tomasz Duszynski
- [PATCH] drivers: iio: Fix wrong license for ADI drivers,
Stefan Popa
- [PATCH 1/2] staging: iio: frequency: ad9833: Get frequency value statically,
Beniamin Bia
- Some thoughts on metadata and iio,
Medenblik, H.J.W. (Henk)
- [PATCH] iio:accel:adxl345: Change alignment to match paranthesis,
Luciana da Costa Marques
- [PATCH v3 2/2] dt-bindings: iio: adc: Add docs for AD7768-1, Stefan Popa
- [PATCH v3 1/2] iio: adc: Add AD7768-1 ADC basic support,
Stefan Popa
- [PATCH v4 1/2] iio: light: add driver for MAX44009,
Robert Eshleman
- [PATCH] iio: adc: at91: disable adc channel interrupt in timeout case,
g.ottinger
- [PATCH] staging: iio: cdc: ad7152: remove driver completely,
Alexandru Ardelean
- [PATCH] iio:potentiostat:lmp91000: solve codestyle WARNINGs and CHECKs,
Lucas Oshiro
- [PATCH] staging:iio:ad7152: align line to match open parenthesis,
Camylla Cantanheide
- [PATCH 1/1] iio: core: Improve precision of __iio_format_value for FRACTIONAL values,
Phil Reid
- [PATCH v2 1/2] dt-bindings: iio: imu: add icm20602 bindings to mpu6050,
Randolph Maaßen
- [PATCH AUTOSEL 4.20 042/304] staging:iio:ad2s90: Make probe handle spi_setup failure, Sasha Levin
- [PATCH AUTOSEL 4.20 081/304] iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID, Sasha Levin
- [PATCH AUTOSEL 4.20 080/304] iio: adc: meson-saradc: fix internal clock names, Sasha Levin
- [PATCH AUTOSEL 4.20 079/304] iio: adc: meson-saradc: check for devm_kasprintf failure, Sasha Levin
- [PATCH AUTOSEL 4.20 051/304] staging: iio: ad7780: update voltage on read, Sasha Levin
- [PATCH AUTOSEL 4.19 036/258] staging:iio:ad2s90: Make probe handle spi_setup failure, Sasha Levin
- [PATCH AUTOSEL 4.19 044/258] staging: iio: ad7780: update voltage on read, Sasha Levin
- [PATCH AUTOSEL 4.19 068/258] iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID, Sasha Levin
- [PATCH AUTOSEL 4.19 067/258] iio: adc: meson-saradc: fix internal clock names, Sasha Levin
- [PATCH AUTOSEL 4.19 002/258] staging: iio: adc: ad7280a: handle error from __ad7280_read32(), Sasha Levin
- [PATCH AUTOSEL 4.14 002/170] staging: iio: adc: ad7280a: handle error from __ad7280_read32(), Sasha Levin
- [PATCH AUTOSEL 4.14 024/170] staging:iio:ad2s90: Make probe handle spi_setup failure, Sasha Levin
- [PATCH AUTOSEL 4.14 028/170] staging: iio: ad7780: update voltage on read, Sasha Levin
- [PATCH AUTOSEL 4.14 039/170] iio: adc: meson-saradc: check for devm_kasprintf failure, Sasha Levin
- [PATCH AUTOSEL 4.14 041/170] iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID, Sasha Levin
- [PATCH AUTOSEL 4.9 024/107] iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID, Sasha Levin
- [PATCH AUTOSEL 4.9 016/107] staging:iio:ad2s90: Make probe handle spi_setup failure, Sasha Levin
- [PATCH AUTOSEL 4.9 017/107] staging: iio: ad7780: update voltage on read, Sasha Levin
- [PATCH AUTOSEL 4.9 002/107] staging: iio: adc: ad7280a: handle error from __ad7280_read32(), Sasha Levin
- [PATCH AUTOSEL 4.4 14/80] staging:iio:ad2s90: Make probe handle spi_setup failure, Sasha Levin
- [PATCH AUTOSEL 4.4 15/80] staging: iio: ad7780: update voltage on read, Sasha Levin
- [PATCH AUTOSEL 3.18 01/61] staging: iio: adc: ad7280a: handle error from __ad7280_read32(),
Sasha Levin
- [PATCH AUTOSEL 4.4 02/80] staging: iio: adc: ad7280a: handle error from __ad7280_read32(), Sasha Levin
- [PATCH AUTOSEL 4.14 040/170] iio: adc: meson-saradc: fix internal clock names, Sasha Levin
- [PATCH AUTOSEL 4.19 066/258] iio: adc: meson-saradc: check for devm_kasprintf failure, Sasha Levin
- [PATCH 1/3] dt-bindings: iio/adc: Add docs for Ingenic JZ47xx SoCs ADC.,
Artur Rojek
- [PATCH v3 1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612,
Ricardo Ribalda Delgado
- [PATCH v3] iio: adc: ad7476: Add support for TI ADS786X ADCs,
Ricardo Ribalda Delgado
- [PATCH v3 0/6] iio:bmi160: add drdy interrupt support,
Martin Kelly
- [PATCH v2 2/2] staging: iio: ad7780: moving ad7780 out of staging,
Renato Lui Geh
- [PATCH v2 1/2] staging: iio: ad7780: add gain & filter gpio support,
Renato Lui Geh
- [PATCH v2 0/2] staging: iio: ad7780: move out of staging,
Renato Lui Geh
- [PATCH v2 0/3] add support for PMS7003 PM sensor,
Tomasz Duszynski
- [PATCH v3 1/2] Add driver support for MAX44009 light sensor,
Robert Eshleman
- [PATCH v2 1/2] Add driver support for MAX44009 light sensor,
Robert Eshleman
- [PATCH] drivers: staging: iio: adc: Include SPDX Identifier,
Felipe Cardoso Resende
- [PATCH v4 0/3] adt7316 regmap implementation,
Shreeya Patel
- [PATCH v2] iio: adc: ti-ads7950: inconsistency with spi msg,
justinpopo6
- [PATCH v2] iio: adc: ad7476: Add support for ADS786X ADCs,
Ricardo Ribalda Delgado
- [PATCH v2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612,
Ricardo Ribalda Delgado
- [PATCH] iio: adc: ti-ads7950: inconsistency with spi msg,
justinpopo6
- [PATCH] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612, Ricardo Ribalda Delgado
- [PATCH] iio: adc: ad7476: Add support for ADS786X ADCs,
Ricardo Ribalda Delgado
- [PATCH] staging:iio:ad7152: Rename misspelled RESEVERD -> RESERVED,
Rodrigo Ribeiro
A situation,
Kerry Miller
[PATCH] drivers: iio: industrialio-core: add check when kzalloc fails,
Bharath Vedartham
imx25 ADC values wrong after sporadic time,
Benjamin Beckmeyer
ti-ads7950.c GPIO Pins,
Justin Chen
iio scale precision,
Phil Reid
[PATCH 1/2] dt-bindings: iio: imu: add icm20602 bindings to mpu6050,
Randolph Maaßen
[PATCH v2 1/6] iio:bmi160: add SPDX identifiers,
Martin Kelly
Example for buffer-dmaengine?,
Crash House
[PATCH v3 0/3] adt7316 regmap implementation,
Shreeya Patel
[PATCH] dt-bindings: iio: pressure: add LPS22HH bindings,
Lorenzo Bianconi
[PATCH v2 0/3] adt7316 regmap implementation,
Shreeya Patel
[PATCH] iio: light: add driver support for MAX44009,
Robert Eshleman
[PATCH v3 0/2] iio: adc: npcm: add NPCM ADC driver,
Tomer Maimon
[PATCH v2 2/2] dt-bindings: iio: adc: Add docs for AD7768-1,
Stefan Popa
[PATCH v2 1/2] iio: adc: Add AD7768-1 ADC basic support,
Stefan Popa
[PATCH v3 1/2] iio: chemical: bme680: Add device-tree support,
Sebastien Bourdelin
[PATCH] iio:st_pressure:initial lps22hh sensor support,
Mario Tesi
[PATCH 0/5] iio:bmi160: add drdy interrupt support,
Martin Kelly
[PATCH v3] iio: chemical: sps30: allow changing self cleaning period,
Tomasz Duszynski
[PATCH v2] tools: iio: iio_generic_buffer: make num_loops signed, Martin Kelly
[PATCH] tools: iio: iio_generic_buffer: make num_loops signed, Martin Kelly
[PATCH v2 1/2] iio: chemical: bme680: Add device-tree support,
Sebastien Bourdelin
[PATCH v2] iio: chemical: sps30: allow changing self cleaning period,
Tomasz Duszynski
[PATCH v3 1/3] iio: ti-ads124s08: Add DT binding documentation,
Dan Murphy
[PATCH 1/2] iio: chemical: bme680: Add device-tree support,
Sebastien Bourdelin
[PATCH v2 0/2] iio: adc: npcm: add NPCM ADC driver,
Tomer Maimon
[PATCH v2 2/2] iio: adc: add NPCM ADC driver, Tomer Maimon
[PATCH v6 0/8] Adding support for STMPE811 ADC,
Philippe Schenker
[PATCH] iio: dac: ad5686: Add support for AD5674R/AD5679R,
Mircea Caprioru
[bug report] tools: iio: iio_generic_buffer: allow continuous looping,
Dan Carpenter
[PATCH AUTOSEL 4.20 069/117] iio: adc: qcom-spmi-adc5: Initialize prescale properly, Sasha Levin
[PATCH V7] iio: magnetometer: mag3110: add vdd/vddio regulator operation support,
Anson Huang
[PATCH V7 1/2] dt-bindings: iio: accel: mma8452: add power supplies property,
Anson Huang
[PATCH V9] iio: light: isl29018: add vcc regulator operation support,
Anson Huang
Re: New IIO/counter driver,
Patrick Havelange
[PATCH 2/2] dt-bindings: iio: adc: Add docs for AD7768-1,
Stefan Popa
[PATCH 1/2] iio: adc: Add AD7768-1 ADC basic support,
Stefan Popa
[PATCH 0/3] add support for PMS7003 PM sensor,
Tomasz Duszynski
[PATCH v2] iio: adc: axp288: Fix TS-pin handling,
Hans de Goede
[PATCH] iio: adc: axp288: Fix TS-pin handling,
Hans de Goede
[PATCH] iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius,
Matt Ranostay
[PATCH 0/2] meson-saradc: temperature sensor support for Meson8b/Meson8m2,
Martin Blumenstingl
[PATCH] iio: adc: xilinx: check return value of xadc_write_adc_reg,
Aditya Pakki
[PATCH] iio: chemical: sps30: allow changing self cleaning period,
Tomasz Duszynski
[PATCH v1 0/2] iio: adc: npcm: add NPCm ADC driver,
Tomer Maimon
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
