Re: [RFC][PATCH] dt-bindings: iio: accel: add adi,adxl345.yaml binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2019-05-13 at 12:25 -0500, Rob Herring wrote:
> [External]
> 
> 
> On Mon, May 06, 2019 at 02:29:54PM +0000, Ardelean, Alexandru wrote:
> > On Mon, 2019-05-06 at 09:17 -0500, Rob Herring wrote:
> > > [External]
> > > 
> > > 
> > > On Mon, May 6, 2019 at 6:46 AM Alexandru Ardelean
> > > <alexandru.ardelean@xxxxxxxxxx> wrote:
> > > > 
> > > > This patch adds a YAML binding for the Analog Devices ADXL345
> > > > I2C/SPI
> > > > accelerometer.
> > > > 
> > > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> > > > ---
> > > > 
> > > > And now for the RFC part.
> > > > Normally, I would dig into source-code to try to figure this out,
> > > > but
> > > > at
> > > > this point-in-time, I am low on time/energy to do this.
> > > > And maybe this helps trigger a discussion about this.
> > > > 
> > > > Apologies if this has been coverted on the devicetree mailing list,
> > > > but
> > > > at least we'd get some coverage on the IIO list (with this).
> > > > 
> > > > The ADXL345 device (as others) supports both I2C & SPI interfaces.
> > > > 
> > > > Question1: do we write 2 YAML files, or 1 ? I was looking at Zephyr
> > > > (for
> > > > some ideas/reference) but it seems to me that the YAML DT binding
> > > > format is
> > > > different than this one ? They write 2 files for ADXL372 (1 for
> > > > SPI, 1
> > > > for
> > > > I2C).
> > > > 
> > > > Question1-a: one thing is that SPI requires some props to be
> > > > `required`
> > > > that would not be required for the I2C binding. This could be
> > > > solved by
> > > > doing 2 files, but if doing 1 YAML file, is there a way to do
> > > > conditional
> > > > `required` ? i.e. property is required if `SPI` ? not sure how to
> > > > check
> > > > for
> > > > SPI vs I2C, it would be interesting (at some point) to somehow
> > > > enforce
> > > > SPI/I2C bindings correctness.
> > > 
> > > The challenge here is there's not really any way for the schema to
> > > know which bus it is. The only ways to know this are knowing all
> > > possible spi or i2c controller compatibles or using the parent node
> > > name (which hasn't been strictly enforced). In order to get this
> > > information available to the schema, we'd need to add the information
> > > to the node. We do this with '$nodename'. We could add a '$bus'
> > > property for example. The tools would have to understand different
> > > buses and things like I2C muxes complicate doing that.
> > > 
> > > Once you have something like $bus available, you could either have 2
> > > files with a custom 'select' that checks compatible and $bus or we
> > > could have 1 file using if/then/else keywords. However, we don't yet
> > > support if/then/else json-schema that was added in draft7, but that's
> > > being worked on by Maxime Ripard.
> > > 
> > > However, for this case, I'd just not worry about the issue. Really,
> > > spi-cpha and spi-cpol should not be required. If only 1 mode is
> > > supported, the driver can know that. IOW, it is implied by the
> > > compatible strings.
> > > 
> > > 
> > > > Question2: `make dt_binding_check` seems to generate only the first
> > > > example. Is this known behavior, or do I need to take something
> > > > else
> > > > into
> > > > consideration ?
> > > 
> > > That's correct. I haven't figured out how to do a variable number of
> > > examples in kbuild.
> > 
> > Then, would it be fine to have multiple examples, and wait for this to
> > pop-
> > in the YAML dt stuff at a later point in time ?
> > Or, just 1 example ?
> 
> I've now fixed this by extracting each example into a sub-node in the
> generated dts file, so multiple examples are fine now. The only
> restriction is labels can't be repeated.

Hey,

Many thanks :)

I'll take a look the next couple of days.

Alex

> 
> Rob




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux