On Sat, 18 May 2019 11:07:49 +0100
Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> On Thu, 16 May 2019 17:32:05 +0300
> Beniamin Bia <beniamin.bia@xxxxxxxxxx> wrote:
>
> > Because this driver will support multiple configurations for software,
> > the software configuration was made generic.
> >
> > Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
> Applied to the togreg branch of iio.git and pushed out as testing for
> the autobuilders to play with it.
As with patch 1, I've backed this out for now as it doesn't make sense
with the later. For reference please add.
Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Thanks,
Jonathan
>
> Thanks
>
> Jonathan
>
> > ---
> > drivers/iio/adc/ad7606.c | 40 +++++++++++++++++++++++++++++++++++++---
> > drivers/iio/adc/ad7606.h | 2 ++
> > 2 files changed, 39 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> > index c66ff22f32d2..aba0fd123a51 100644
> > --- a/drivers/iio/adc/ad7606.c
> > +++ b/drivers/iio/adc/ad7606.c
> > @@ -140,7 +140,7 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
> > int *val2,
> > long m)
> > {
> > - int ret;
> > + int ret, ch = 0;
> > struct ad7606_state *st = iio_priv(indio_dev);
> >
> > switch (m) {
> > @@ -157,8 +157,10 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
> > *val = (short)ret;
> > return IIO_VAL_INT;
> > case IIO_CHAN_INFO_SCALE:
> > + if (st->sw_mode_en)
> > + ch = chan->address;
> > *val = 0;
> > - *val2 = st->scale_avail[st->range[0]];
> > + *val2 = st->scale_avail[st->range[ch]];
> > return IIO_VAL_INT_PLUS_MICRO;
> > case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> > *val = st->oversampling;
> > @@ -233,7 +235,9 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
> > case IIO_CHAN_INFO_SCALE:
> > mutex_lock(&st->lock);
> > i = find_closest(val2, st->scale_avail, st->num_scales);
> > - ret = st->write_scale(indio_dev, chan->address, i);
> > + if (st->sw_mode_en)
> > + ch = chan->address;
> > + ret = st->write_scale(indio_dev, ch, i);
> > if (ret < 0) {
> > mutex_unlock(&st->lock);
> > return ret;
> > @@ -616,6 +620,36 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> > st->write_scale = ad7606_write_scale_hw;
> > st->write_os = ad7606_write_os_hw;
> >
> > + if (st->chip_info->sw_mode_config)
> > + st->sw_mode_en = device_property_present(st->dev,
> > + "adi,sw-mode");
> > +
> > + if (st->sw_mode_en) {
> > + /* After reset, in software mode, ±10 V is set by default */
> > + memset32(st->range, 2, ARRAY_SIZE(st->range));
> > + indio_dev->info = &ad7606_info_os_and_range;
> > +
> > + /*
> > + * In software mode, the range gpio has no longer its function.
> > + * Instead, the scale can be configured individually for each
> > + * channel from the range registers.
> > + */
> > + if (st->chip_info->write_scale_sw)
> > + st->write_scale = st->chip_info->write_scale_sw;
> > +
> > + /*
> > + * In software mode, the oversampling is no longer configured
> > + * with GPIO pins. Instead, the oversampling can be configured
> > + * in configuratiion register.
> > + */
> > + if (st->chip_info->write_os_sw)
> > + st->write_os = st->chip_info->write_os_sw;
> > +
> > + ret = st->chip_info->sw_mode_config(indio_dev);
> > + if (ret < 0)
> > + return ret;
> > + }
> > +
> > st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
> > indio_dev->name, indio_dev->id);
> > if (!st->trig)
> > diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
> > index 143c30163df9..d8a509c2c428 100644
> > --- a/drivers/iio/adc/ad7606.h
> > +++ b/drivers/iio/adc/ad7606.h
> > @@ -43,6 +43,7 @@ struct ad7606_chip_info {
> > * @range voltage range selection, selects which scale to apply
> > * @oversampling oversampling selection
> > * @base_address address from where to read data in parallel operation
> > + * @sw_mode_en software mode enabled
> > * @scale_avail pointer to the array which stores the available scales
> > * @num_scales number of elements stored in the scale_avail array
> > * @oversampling_avail pointer to the array which stores the available
> > @@ -71,6 +72,7 @@ struct ad7606_state {
> > unsigned int range[16];
> > unsigned int oversampling;
> > void __iomem *base_address;
> > + bool sw_mode_en;
> > const unsigned int *scale_avail;
> > unsigned int num_scales;
> > const unsigned int *oversampling_avail;
>
