[PATCH v2] iio: adc: ad7766: Change alignment to match paranthesis

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This commit align broken line to match upper line parenthesis,
in lines 80, 130, 237, 242, 255, 264 and 293. Solves the checkpatch.pl's message:

CHECK: Alignment should match open parenthesis

In lines 130, 255, 264 and 293 it was necessary to break a line.

Signed-off-by: Camylla Gonçalves Cantanheide <c.cantanheide@xxxxxxxxx>
---
 .../bindings/iio/adc/nuvoton,npcm-adc.txt     |  11 -
 .../iio/chemical/plantower,pms7003.txt        |  20 ++
 .../devicetree/bindings/vendor-prefixes.txt   |   1 +
 drivers/iio/adc/ad7766.c                      |  22 +-
 drivers/iio/chemical/Kconfig                  |  10 +
 drivers/iio/chemical/Makefile                 |   1 +
 drivers/iio/chemical/pms7003.c                | 340 ++++++++++++++++++
 drivers/iio/chemical/sps30.c                  |   3 +
 8 files changed, 388 insertions(+), 20 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
 create mode 100644 drivers/iio/chemical/pms7003.c

diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
index 1b8132cd9060..eb939fe77836 100644
--- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
@@ -14,11 +14,6 @@ Optional properties:
 			   vref-supply is not added the ADC will use internal voltage
 			   reference.
 
-Required Node in the NPCM7xx BMC:
-An additional register is present in the NPCM7xx SOC which is
-assumed to be in the same device tree, with and marked as
-compatible with "nuvoton,npcm750-rst".
-
 Example:
 
 adc: adc@f000c000 {
@@ -27,9 +22,3 @@ adc: adc@f000c000 {
 	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 	clocks = <&clk NPCM7XX_CLK_ADC>;
 };
-
-rst: rst@f0801000 {
-	compatible = "nuvoton,npcm750-rst", "syscon",
-	"simple-mfd";
-	reg = <0xf0801000 0x6C>;
-};
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
new file mode 100644
index 000000000000..7b5f06f324c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
@@ -0,0 +1,20 @@
+* Plantower PMS7003 particulate matter sensor
+
+Required properties:
+- compatible: must be "plantower,pms7003"
+- vcc-supply: phandle to the regulator that provides power to the sensor
+
+Optional properties:
+- plantower,set-gpios: phandle to the GPIO connected to the SET line
+- reset-gpios: phandle to the GPIO connected to the RESET line
+
+Refer to serial/slave-device.txt for generic serial attached device bindings.
+
+Example:
+
+&uart0 {
+	air-pollution-sensor {
+		compatible = "plantower,pms7003";
+		vcc-supply = <&reg_vcc5v0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 389508584f48..42816baeb381 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -304,6 +304,7 @@ phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd
 pine64	Pine64
 pixcir  PIXCIR MICROELECTRONICS Co., Ltd
+plantower Plantower Co., Ltd
 plathome	Plat'Home Co., Ltd.
 plda	PLDA
 plx	Broadcom Corporation (formerly PLX Technology)
diff --git a/drivers/iio/adc/ad7766.c b/drivers/iio/adc/ad7766.c
index 3ae14fc8c649..101502435768 100644
--- a/drivers/iio/adc/ad7766.c
+++ b/drivers/iio/adc/ad7766.c
@@ -77,7 +77,7 @@ static irqreturn_t ad7766_trigger_handler(int irq, void *p)
 		goto done;
 
 	iio_push_to_buffers_with_timestamp(indio_dev, ad7766->data,
-		pf->timestamp);
+					   pf->timestamp);
 done:
 	iio_trigger_notify_done(indio_dev->trig);
 
@@ -127,7 +127,8 @@ static int ad7766_postdisable(struct iio_dev *indio_dev)
 }
 
 static int ad7766_read_raw(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, int *val, int *val2, long info)
+			   const struct iio_chan_spec *chan, int *val,
+			   int *val2, long info)
 {
 	struct ad7766 *ad7766 = iio_priv(indio_dev);
 	struct regulator *vref = ad7766->reg[AD7766_SUPPLY_VREF].consumer;
@@ -234,12 +235,12 @@ static int ad7766_probe(struct spi_device *spi)
 	ad7766->reg[AD7766_SUPPLY_VREF].supply = "vref";
 
 	ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg),
-		ad7766->reg);
+				      ad7766->reg);
 	if (ret)
 		return ret;
 
 	ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
-		GPIOD_OUT_HIGH);
+						  GPIOD_OUT_HIGH);
 	if (IS_ERR(ad7766->pd_gpio))
 		return PTR_ERR(ad7766->pd_gpio);
 
@@ -252,7 +253,8 @@ static int ad7766_probe(struct spi_device *spi)
 
 	if (spi->irq > 0) {
 		ad7766->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
-			indio_dev->name, indio_dev->id);
+						      indio_dev->name,
+						      indio_dev->id);
 		if (!ad7766->trig)
 			return -ENOMEM;
 
@@ -261,8 +263,9 @@ static int ad7766_probe(struct spi_device *spi)
 		iio_trigger_set_drvdata(ad7766->trig, ad7766);
 
 		ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq,
-			IRQF_TRIGGER_FALLING, dev_name(&spi->dev),
-			ad7766->trig);
+				       IRQF_TRIGGER_FALLING,
+				       dev_name(&spi->dev),
+				       ad7766->trig);
 		if (ret < 0)
 			return ret;
 
@@ -290,8 +293,9 @@ static int ad7766_probe(struct spi_device *spi)
 	spi_message_add_tail(&ad7766->xfer, &ad7766->msg);
 
 	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
-		&iio_pollfunc_store_time, &ad7766_trigger_handler,
-		&ad7766_buffer_setup_ops);
+					      &iio_pollfunc_store_time,
+					      &ad7766_trigger_handler,
+					      &ad7766_buffer_setup_ops);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index 57832b4360e9..d5d146e9e372 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -61,6 +61,16 @@ config IAQCORE
 	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds)
 	  sensors
 
+config PMS7003
+	tristate "Plantower PMS7003 particulate matter sensor"
+	depends on SERIAL_DEV_BUS
+	help
+	  Say Y here to build support for the Plantower PMS7003 particulate
+	  matter sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called pms7003.
+
 config SPS30
 	tristate "SPS30 particulate matter sensor"
 	depends on I2C
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
index 65bf0f89c0e4..f5d1365acb49 100644
--- a/drivers/iio/chemical/Makefile
+++ b/drivers/iio/chemical/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
 obj-$(CONFIG_BME680_SPI) += bme680_spi.o
 obj-$(CONFIG_CCS811)		+= ccs811.o
 obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
+obj-$(CONFIG_PMS7003) += pms7003.o
 obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
 obj-$(CONFIG_SPS30) += sps30.o
 obj-$(CONFIG_VZ89X)		+= vz89x.o
diff --git a/drivers/iio/chemical/pms7003.c b/drivers/iio/chemical/pms7003.c
new file mode 100644
index 000000000000..db8e7b2327b3
--- /dev/null
+++ b/drivers/iio/chemical/pms7003.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Plantower PMS7003 particulate matter sensor driver
+ *
+ * Copyright (c) Tomasz Duszynski <tduszyns@xxxxxxxxx>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/serdev.h>
+
+#define PMS7003_DRIVER_NAME "pms7003"
+
+#define PMS7003_MAGIC 0x424d
+/* last 2 data bytes hold frame checksum */
+#define PMS7003_MAX_DATA_LENGTH 28
+#define PMS7003_CHECKSUM_LENGTH 2
+#define PMS7003_PM10_OFFSET 10
+#define PMS7003_PM2P5_OFFSET 8
+#define PMS7003_PM1_OFFSET 6
+
+#define PMS7003_TIMEOUT msecs_to_jiffies(6000)
+#define PMS7003_CMD_LENGTH 7
+#define PMS7003_PM_MAX 1000
+#define PMS7003_PM_MIN 0
+
+enum {
+	PM1,
+	PM2P5,
+	PM10,
+};
+
+enum pms7003_cmd {
+	CMD_WAKEUP,
+	CMD_ENTER_PASSIVE_MODE,
+	CMD_READ_PASSIVE,
+	CMD_SLEEP,
+};
+
+/*
+ * commands have following format:
+ *
+ * +------+------+-----+------+-----+-----------+-----------+
+ * | 0x42 | 0x4d | cmd | 0x00 | arg | cksum msb | cksum lsb |
+ * +------+------+-----+------+-----+-----------+-----------+
+ */
+static const u8 pms7003_cmd_tbl[][PMS7003_CMD_LENGTH] = {
+	[CMD_WAKEUP] = { 0x42, 0x4d, 0xe4, 0x00, 0x01, 0x01, 0x74 },
+	[CMD_ENTER_PASSIVE_MODE] = { 0x42, 0x4d, 0xe1, 0x00, 0x00, 0x01, 0x70 },
+	[CMD_READ_PASSIVE] = { 0x42, 0x4d, 0xe2, 0x00, 0x00, 0x01, 0x71 },
+	[CMD_SLEEP] = { 0x42, 0x4d, 0xe4, 0x00, 0x00, 0x01, 0x73 },
+};
+
+struct pms7003_frame {
+	u8 data[PMS7003_MAX_DATA_LENGTH];
+	u16 expected_length;
+	u16 length;
+};
+
+struct pms7003_state {
+	struct serdev_device *serdev;
+	struct pms7003_frame frame;
+	struct completion frame_ready;
+	struct mutex lock; /* must be held whenever state gets touched */
+};
+
+static int pms7003_do_cmd(struct pms7003_state *state, enum pms7003_cmd cmd)
+{
+	int ret;
+
+	ret = serdev_device_write(state->serdev, pms7003_cmd_tbl[cmd],
+				  PMS7003_CMD_LENGTH, PMS7003_TIMEOUT);
+	if (ret < PMS7003_CMD_LENGTH)
+		return ret < 0 ? ret : -EIO;
+
+	ret = wait_for_completion_interruptible_timeout(&state->frame_ready,
+							PMS7003_TIMEOUT);
+	if (!ret)
+		ret = -ETIMEDOUT;
+
+	return ret < 0 ? ret : 0;
+}
+
+static u16 pms7003_get_pm(const u8 *data)
+{
+	return clamp_val(get_unaligned_be16(data),
+			 PMS7003_PM_MIN, PMS7003_PM_MAX);
+}
+
+static irqreturn_t pms7003_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct pms7003_state *state = iio_priv(indio_dev);
+	struct pms7003_frame *frame = &state->frame;
+	u16 data[3 + 1 + 4]; /* PM1, PM2P5, PM10, padding, timestamp */
+	int ret;
+
+	mutex_lock(&state->lock);
+	ret = pms7003_do_cmd(state, CMD_READ_PASSIVE);
+	if (ret) {
+		mutex_unlock(&state->lock);
+		goto err;
+	}
+
+	data[PM1] = pms7003_get_pm(frame->data + PMS7003_PM1_OFFSET);
+	data[PM2P5] = pms7003_get_pm(frame->data + PMS7003_PM2P5_OFFSET);
+	data[PM10] = pms7003_get_pm(frame->data + PMS7003_PM10_OFFSET);
+	mutex_unlock(&state->lock);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data,
+					   iio_get_time_ns(indio_dev));
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int pms7003_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct pms7003_state *state = iio_priv(indio_dev);
+	struct pms7003_frame *frame = &state->frame;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_MASSCONCENTRATION:
+			mutex_lock(&state->lock);
+			ret = pms7003_do_cmd(state, CMD_READ_PASSIVE);
+			if (ret) {
+				mutex_unlock(&state->lock);
+				return ret;
+			}
+
+			*val = pms7003_get_pm(frame->data + chan->address);
+			mutex_unlock(&state->lock);
+
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info pms7003_info = {
+	.read_raw = pms7003_read_raw,
+};
+
+#define PMS7003_CHAN(_index, _mod, _addr) { \
+	.type = IIO_MASSCONCENTRATION, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## _mod, \
+	.address = _addr, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+	.scan_index = _index, \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 10, \
+		.storagebits = 16, \
+		.endianness = IIO_CPU, \
+	}, \
+}
+
+static const struct iio_chan_spec pms7003_channels[] = {
+	PMS7003_CHAN(0, PM1, PMS7003_PM1_OFFSET),
+	PMS7003_CHAN(1, PM2P5, PMS7003_PM2P5_OFFSET),
+	PMS7003_CHAN(2, PM10, PMS7003_PM10_OFFSET),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static u16 pms7003_calc_checksum(struct pms7003_frame *frame)
+{
+	u16 checksum = (PMS7003_MAGIC >> 8) + (u8)(PMS7003_MAGIC & 0xff) +
+		       (frame->length >> 8) + (u8)frame->length;
+	int i;
+
+	for (i = 0; i < frame->length - PMS7003_CHECKSUM_LENGTH; i++)
+		checksum += frame->data[i];
+
+	return checksum;
+}
+
+static bool pms7003_frame_is_okay(struct pms7003_frame *frame)
+{
+	int offset = frame->length - PMS7003_CHECKSUM_LENGTH;
+	u16 checksum = get_unaligned_be16(frame->data + offset);
+
+	return checksum == pms7003_calc_checksum(frame);
+}
+
+static int pms7003_receive_buf(struct serdev_device *serdev,
+			       const unsigned char *buf, size_t size)
+{
+	struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev);
+	struct pms7003_state *state = iio_priv(indio_dev);
+	struct pms7003_frame *frame = &state->frame;
+	int num;
+
+	if (!frame->expected_length) {
+		u16 magic;
+
+		/* wait for SOF and data length */
+		if (size < 4)
+			return 0;
+
+		magic = get_unaligned_be16(buf);
+		if (magic != PMS7003_MAGIC)
+			return 2;
+
+		num = get_unaligned_be16(buf + 2);
+		if (num <= PMS7003_MAX_DATA_LENGTH) {
+			frame->expected_length = num;
+			frame->length = 0;
+		}
+
+		return 4;
+	}
+
+	num = min(size, (size_t)(frame->expected_length - frame->length));
+	memcpy(frame->data + frame->length, buf, num);
+	frame->length += num;
+
+	if (frame->length == frame->expected_length) {
+		if (pms7003_frame_is_okay(frame))
+			complete(&state->frame_ready);
+
+		frame->expected_length = 0;
+	}
+
+	return num;
+}
+
+static const struct serdev_device_ops pms7003_serdev_ops = {
+	.receive_buf = pms7003_receive_buf,
+	.write_wakeup = serdev_device_write_wakeup,
+};
+
+static void pms7003_stop(void *data)
+{
+	struct pms7003_state *state = data;
+
+	pms7003_do_cmd(state, CMD_SLEEP);
+}
+
+static const unsigned long pms7003_scan_masks[] = { 0x07, 0x00 };
+
+static int pms7003_probe(struct serdev_device *serdev)
+{
+	struct pms7003_state *state;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&serdev->dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	state = iio_priv(indio_dev);
+	serdev_device_set_drvdata(serdev, indio_dev);
+	state->serdev = serdev;
+	indio_dev->dev.parent = &serdev->dev;
+	indio_dev->info = &pms7003_info;
+	indio_dev->name = PMS7003_DRIVER_NAME;
+	indio_dev->channels = pms7003_channels,
+	indio_dev->num_channels = ARRAY_SIZE(pms7003_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->available_scan_masks = pms7003_scan_masks;
+
+	mutex_init(&state->lock);
+	init_completion(&state->frame_ready);
+
+	serdev_device_set_client_ops(serdev, &pms7003_serdev_ops);
+	ret = devm_serdev_device_open(&serdev->dev, serdev);
+	if (ret)
+		return ret;
+
+	serdev_device_set_baudrate(serdev, 9600);
+	serdev_device_set_flow_control(serdev, false);
+
+	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+	if (ret)
+		return ret;
+
+	ret = pms7003_do_cmd(state, CMD_WAKEUP);
+	if (ret) {
+		dev_err(&serdev->dev, "failed to wakeup sensor\n");
+		return ret;
+	}
+
+	ret = pms7003_do_cmd(state, CMD_ENTER_PASSIVE_MODE);
+	if (ret) {
+		dev_err(&serdev->dev, "failed to enter passive mode\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&serdev->dev, pms7003_stop, state);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(&serdev->dev, indio_dev, NULL,
+					      pms7003_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&serdev->dev, indio_dev);
+}
+
+static const struct of_device_id pms7003_of_match[] = {
+	{ .compatible = "plantower,pms7003" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pms7003_of_match);
+
+static struct serdev_device_driver pms7003_driver = {
+	.driver = {
+		.name = PMS7003_DRIVER_NAME,
+		.of_match_table = pms7003_of_match,
+	},
+	.probe = pms7003_probe,
+};
+module_serdev_device_driver(pms7003_driver);
+
+MODULE_AUTHOR("Tomasz Duszynski <tduszyns@xxxxxxxxx>");
+MODULE_DESCRIPTION("Plantower PMS7003 particulate matter sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
index 375df5060ed5..edbb956e81e8 100644
--- a/drivers/iio/chemical/sps30.c
+++ b/drivers/iio/chemical/sps30.c
@@ -118,6 +118,7 @@ static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size)
 	case SPS30_READ_AUTO_CLEANING_PERIOD:
 		buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8;
 		buf[1] = (u8)SPS30_AUTO_CLEANING_PERIOD;
+		/* fall through */
 	case SPS30_READ_DATA_READY_FLAG:
 	case SPS30_READ_DATA:
 	case SPS30_READ_SERIAL:
@@ -295,6 +296,8 @@ static int sps30_read_raw(struct iio_dev *indio_dev,
 				*val2 = 10000;
 
 				return IIO_VAL_INT_PLUS_MICRO;
+			default:
+				return -EINVAL;
 			}
 		default:
 			return -EINVAL;
-- 
2.17.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux