From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx> Add the compatible name to the driver so it gets loaded when the proper node in DT is detected. Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx> --- drivers/iio/adc/stmpe-adc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c index 37f4b74a5d32..9ec338ba3440 100644 --- a/drivers/iio/adc/stmpe-adc.c +++ b/drivers/iio/adc/stmpe-adc.c @@ -354,9 +354,14 @@ static struct platform_driver stmpe_adc_driver = { .pm = &stmpe_adc_pm_ops, }, }; - module_platform_driver(stmpe_adc_driver); +static const struct of_device_id stmpe_adc_ids[] = { + { .compatible = "st,stmpe-adc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, stmpe_adc_ids); + MODULE_AUTHOR("Stefan Agner <stefan.agner@xxxxxxxxxxx>"); MODULE_DESCRIPTION("STMPEXXX ADC driver"); MODULE_LICENSE("GPL v2"); -- 2.21.0