[Prev Page][Next Page]
- Re: [PATCH] mtd: nand: stm_nand_bch: add new driver
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [RFC PATCH v3] reset: Add a defer reset object to send board specific reset
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
- From: Maxime Coquelin <maxime.coquelin@xxxxxx>
- Re: [PATCH v2 1/2] ARM: topology: Use a clock if possible to get the CPU frequency
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH] of: Add vendor prefix for EON Corporation
- From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx>
- Re: [PATCH] gpio: gpio-twl4030.c: Cleaning up null pointer checks that could never happen
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] of: Use proper types for checking memory overflow
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- Re: [PATCH] of: Use proper types for checking memory overflow
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [GIT PULL] SPEAr1310 PCIe patches rebased on 3.16-rc3
- From: Mohit KUMAR DCG <Mohit.KUMAR@xxxxxx>
- Re: [PATCH v8 3/9] pci: Introduce pci_register_io_range() helper function.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [linux-sunxi] Re: [PATCH v3 1/4] dt: bindings: add bindings for Broadcom bcm43xx sdio devices
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- RE: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support
- From: Mohit KUMAR DCG <Mohit.KUMAR@xxxxxx>
- Re: [PATCH v4 7/8] ARM: Exynos: switch to using generic cpufreq-cpu0 driver
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- [PATCH][v2]devicetree/binding/powerpc/fsl: Add binding for CPLD
- From: Priyanka Jain <Priyanka.Jain@xxxxxxxxxxxxx>
- [RESEND PATCHv2 3/3] ARM: dts: Add clock property for mfc_pd in 5420
- From: Arun Kumar K <arun.kk@xxxxxxxxxxx>
- [RESEND PATCHv2 2/3] clk: exynos5420: Add IDs for clocks used in PD mfc
- From: Arun Kumar K <arun.kk@xxxxxxxxxxx>
- [RESEND PATCHv2 1/3] ARM: EXYNOS: Add support for clock handling in power domain
- From: Arun Kumar K <arun.kk@xxxxxxxxxxx>
- [RESEND PATCHv2 0/3] Power-domain clk handling
- From: Arun Kumar K <arun.kk@xxxxxxxxxxx>
- Re: [PATCH 00/14] cpufreq: cpu0: Extend support beyond CPU0, V2
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- RE: [PATCH] devicetree/bindings: Add binding for micron n25q512a memory
- From: Priyanka Jain <Priyanka.Jain@xxxxxxxxxxxxx>
- Re: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- RE: [PATCH] devicetree/bindings/powerpc/fsl: Add binding for board
- From: Priyanka Jain <Priyanka.Jain@xxxxxxxxxxxxx>
- RE: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support
- From: Mohit KUMAR DCG <Mohit.KUMAR@xxxxxx>
- Re: [PATCH 0/3] dra7: Add PCIe support
- From: Pratyush Anand <pratyush.anand@xxxxxxxxx>
- Re: [PATCH 2/3] ARM: dts: Update the parent for Audss clocks in Exynos5420
- From: Tushar Behera <trblinux@xxxxxxxxx>
- [PATCH v3 2/2] spi: add driver for Rockchip RK3xxx SoCs integrated SPI
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH RESEND] ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
- From: George Joseph <george.joseph@xxxxxxxxxxxxx>
- [PATCH 2/3] pinctrl: Device tree bindings for Qualcomm pm8xxx gpio block
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
- [PATCH 3/3] pinctrl: Introduce pinctrl driver for Qualcomm pm8xxx
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
- [PATCH 1/3] mfd: pm8921: Expose pm8xxx_read_irq_status
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
- [PATCH 0/3] Qualcomm pm8xxx gpio driver
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH v8 8/9] pci: Add support for creating a generic host_bridge from device tree
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH v8 6/9] pci: Introduce a domain number for pci_host_bridge.
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCHv2 1/3] of: Split early_init_dt_scan into two parts
- From: Laura Abbott <lauraa@xxxxxxxxxxxxxx>
- [PATCH] of: Use proper types for checking memory overflow
- From: Laura Abbott <lauraa@xxxxxxxxxxxxxx>
- [PATCH v5 10/14] drm/panel: add S6E3FA0 driver
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 13/14] ARM: dts: exynos5420: add mipi-phy node
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 05/14] drm/exynos: dsi: add pass TE host ops to support LCD I80 interface
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 06/14] drm/exynos: fimd: support LCD I80 interface
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 14/14] ARM: dts: exynos5420: add dsi node
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 12/14] ARM: dts: exynos5: add system register property
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 08/14] drm/exynos: dsi: add driver data to support Exynos5410/5420/5440 SoCs
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 11/14] ARM: dts: exynos4: add system register property
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 00/14] drm/exynos: support LCD I80 interface display
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 04/14] drm/exynos: add TE handler to support LCD I80 interface
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 07/14] ARM: dts: exynos_dsim: add exynos5410 compatible to DT bindings
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 09/14] ARM: dts: s6e3fa0: add DT bindings
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 03/14] ARM: dts: samsung-fimd: add LCD I80 interface specific properties
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 02/14] drm/exynos: use wait_event_timeout() for safety usage
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- [PATCH v5 01/14] drm/exynos: dsi: move the EoT packets configuration point
- From: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
- Re: [PATCH] mtd: nand: stm_nand_bch: add new driver
- From: Brian Norris <computersforpeace@xxxxxxxxx>
- Re: [PATCH v8 3/9] pci: Introduce pci_register_io_range() helper function.
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH] mtd: nand: stm_nand_bch: add new driver
- From: Brian Norris <computersforpeace@xxxxxxxxx>
- Re: [PATCH 2/3] ARM: dts: Update the parent for Audss clocks in Exynos5420
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- Re: [PATCH v8 2/9] pci: Export find_pci_host_bridge() function.
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH V5 2/3] Documentation: gpio: Add APM X-Gene SoC GPIO controller DTS binding
- From: Anton Vorontsov <anton.vorontsov@xxxxxxxxxx>
- Re: [PATCH 09/18] AT91: Call at91_register_devices in the board files
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] devicetree/bindings/powerpc/fsl: Add binding for board
- From: Scott Wood <scottwood@xxxxxxxxxxxxx>
- Re: [PATCH][v2] devicetree/binding/powerpc/fsl: Add binding for CPLD
- From: Scott Wood <scottwood@xxxxxxxxxxxxx>
- Re: [PATCH] devicetree/bindings: Add binding for micron n25q512a memory
- From: Scott Wood <scottwood@xxxxxxxxxxxxx>
- Re: [PATCH V5 2/3] Documentation: gpio: Add APM X-Gene SoC GPIO controller DTS binding
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v8 4/9] pci: OF: Fix the conversion of IO ranges into IO resources.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v4 0/3] Add R8A7791/Koelsch/Henninger board PCI DT support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH V4 00/10] drm: exynos: few patches to enhance bridge chip support
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH V4 00/10] drm: exynos: few patches to enhance bridge chip support
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 05/18] power: reset: Add AT91 reset driver
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH V5 2/3] Documentation: gpio: Add APM X-Gene SoC GPIO controller DTS binding
- From: Feng Kan <fkan@xxxxxxx>
- Re: [PATCH v3 1/4] dt: bindings: add bindings for Broadcom bcm43xx sdio devices
- From: "John W. Linville" <linville@xxxxxxxxxxxxx>
- Re: [PATCH 00/13] uio_pruss: add support for devicetree and am33xx
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: Add driver for Zynq GPIO controller
- From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
- Re: [PATCH v5] ASoC: tas2552: Support TI TAS2552 Amplifier
- From: Dan Murphy <dmurphy@xxxxxx>
- Re: [PATCH v2 2/2] devicetree: Add Zynq GPIO devicetree bindings documentation
- From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
- [PATCH v6 1/2] libahci: Export some of the libahci functions.
- From: Suman Tripathi <stripathi@xxxxxxx>
- [PATCH v6 2/2] ata: Fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
- From: Suman Tripathi <stripathi@xxxxxxx>
- [PATCH v6 0/2] ata: Fix the dma state machine lockup for APM X-Gene SoC
- From: Suman Tripathi <stripathi@xxxxxxx>
- Re: [PATCH] mmc: core: Add DT bindings for card detect debounce time
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v3 1/5] PCI: designware: add rd[wr]_other_conf API
- From: Murali Karicheri <m-karicheri2@xxxxxx>
- Re: [PATCH v3 2/5] PCI: designware: refactor MSI code to work with v3.65 dw hardware
- From: Murali Karicheri <m-karicheri2@xxxxxx>
- [RESEND PATCH v3 09/11] ARM: at91/dt: define the HLCDC node available on sama5d3 SoCs
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 10/11] ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 11/11] ARM: at91/dt: enable the LCD panel on sama5d3xek boards
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 05/11] drm: add Atmel HLCDC Display Controller support
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 07/11] ARM: AT91/dt: split sama5d3 lcd pin definitions to match RGB mode configs
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 06/11] drm: add DT bindings documentation for atmel-hlcdc-dc driver
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 08/11] ARM: AT91/dt: add alternative pin muxing for sama5d3 lcd pins
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 02/11] mfd: add documentation for atmel-hlcdc DT bindings
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 03/11] pwm: add support for atmel-hlcdc-pwm device
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 04/11] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 01/11] mfd: add atmel-hlcdc driver
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RESEND PATCH v3 00/11] drm: add support for Atmel HLCDC Display Controller
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH 9/9] ARM: dts: exynos3250: add JPEG codec device node
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- [PATCH 8/9] Documentation: devicetree: Document sclk-jpeg clock for exynos3250 SoC
- From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: Add driver for Zynq GPIO controller
- From: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
- Re: [PATCH] pinctrl: pinctrl-st.c: Cleaning up values that are never used
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] pinctrl: pinctrl-single.c: Cleaning up wrong format string usage
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] pinctrl: pinctrl-single.c: Cleaning up values that are never used
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] pinctrl: pinctrl-at91.c: Cleaning up values that are never used
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] pinctrl: pinctrl-st.c: Cleaning up if unsigned is less than zero
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] pinctrl: pinctrl-imx1-core.c: Cleaning up if unsigned is less than zero
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] pinctrl: pinctrl-imx.c: Cleaning up if unsigned is less than zero
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] pinctrl: pinctrl-at91.c: Cleaning up if unsigned is less than zero
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: Add driver for Zynq GPIO controller
- From: Baruch Siach <baruch@xxxxxxxxxx>
- [PATCH v10 6/7] dt-bindings: add documentation for Mediatek SoC
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- [PATCH v10 2/7] clocksource: Add support for the Mediatek SoCs
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- [PATCH v10 1/7] of: Provide function to request and map memory
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- [PATCH v10 3/7] dt-bindings: add mtk-timer bindings
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- [PATCH v10 7/7] arm: mediatek: add dts for Aquaris5 mobile phone
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- [PATCH v10 5/7] arm: add basic support for Mediatek MT6589 boards
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- [PATCH v10 4/7] vendor-prefixes: add prefix for Mediatek Inc.
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- [PATCH v10 0/7] arm: Add basic support for Mediatek Cortex-A7 SoCs
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- [PATCH 3/4] pinctrl: qcom: Add PM8941 and PM8941 pinctrl drivers
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- [PATCH 2/4] pinctrl: qcom: Add documentation for pinctrl-qpnp binding
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- [PATCH 0/4] New Qualcomm PMIC pin controller drivers
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- [PATCH 1/4] pinctrl: qpnp: Qualcomm PMIC pin controller driver
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- Re: [PATCH] mmc: core: Add DT bindings for card detect debounce time
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 4/4] ARM: dts: qcom: Add PM8941 and PM8841 pinctrl nodes
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- [PATCH v2] Adding selftest testdata dynamically into live tree
- From: Gaurav Minocha <gaurav.minocha.os@xxxxxxxxx>
- Re: [PATCH v2 00/18] AT91: cleanup of the reset and poweroff code
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 04/18] AT91: Rework ramc mapping code
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 03/18] AT91: G45: DT: Declare a second ram controller
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] devicetree: Add Zynq GPIO devicetree bindings documentation
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 01/11] mfd: add atmel-hlcdc driver
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 02/11] mfd: add documentation for atmel-hlcdc DT bindings
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 00/11] drm: add support for Atmel HLCDC Display Controller
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: Add driver for Zynq GPIO controller
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCHv2 2/8] clk: mvebu: extend clk-cpu for dynamic frequency scaling
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 10/11] ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 08/11] ARM: AT91/dt: add alternative pin muxing for sama5d3 lcd pins
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 07/11] ARM: AT91/dt: split sama5d3 lcd pin definitions to match RGB mode configs
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 06/11] drm: add DT bindings documentation for atmel-hlcdc-dc driver
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 11/11] ARM: at91/dt: enable the LCD panel on sama5d3xek boards
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 09/11] ARM: at91/dt: define the HLCDC node available on sama5d3 SoCs
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 05/11] drm: add Atmel HLCDC Display Controller support
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 03/11] pwm: add support for atmel-hlcdc-pwm device
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 04/11] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH] of: Add vendor prefix for Dialog Semiconductor Plc
- From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] gpio: Add driver for Zynq GPIO controller
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2 02/18] AT91: setup: Switch to pr_fmt
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 04/18] AT91: Rework ramc mapping code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 05/18] AT91: SAMA5D3: DT: Add shutdown controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 00/18] AT91: cleanup of the reset and poweroff code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 06/18] power: reset: Add AT91 reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 17/18] AT91: Remove rstc and shdwnc global base addresses
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 18/18] AT91: Remove rstc and shdwc headers
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 09/18] AT91: Probe the reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 10/18] AT91: Call at91_register_devices in the board files
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 11/18] AT91: Remove reset code from the machine code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 15/18] AT91: Remove poweroff code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 14/18] AT91: Register the poweroff driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 16/18] AT91: pm: Remove show_reset_status function
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 13/18] AT91: DT: Remove poweroff DT probing
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 12/18] power: reset: Add AT91 poweroff driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 07/18] AT91: DT: Remove the old-style reset probing
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 08/18] AT91: soc: Introduce register_devices callback
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 03/18] AT91: G45: DT: Declare a second ram controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 01/18] power: reset: Add if statement isntead of multiple depends on
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 2/4] pinctrl: Add NVIDIA Tegra XUSB pad controller support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH V2] ARM: dts: OMAP5: Add device nodes for ABB
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v2 3/4] USB: EHCI: tegra: Fix probe order issue leading to broken USB
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: remove display power domain for exynos5420
- From: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
- Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH v2 15/20] pinctrl: sunxi: Add A23 R_PIO controller support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 14/20] pinctrl: sunxi: Add A23 PIO controller support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4] powerpc/powernv: hwmon driver for power, fan rpm, voltage and temperature
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [RFC PATCH v3] reset: Add a defer reset object to send board specific reset
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [RESEND PATCH 2/3] iio: st_sensors: add device tree bindings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] of: Add vendor prefix for Innolux Corporation
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [RFC 01/10] iommu: Add IOMMU device registry
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 2/2] ARM: DTS: am335x-evmsk: Enable the McASP FIFO for audio
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH V2] ARM: dts: OMAP5: Add device nodes for ABB
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3 v5] spi: s3c64xx: fix broken "cs_gpios" usage in the driver
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v8 0/9] Support for creating generic PCI host bridges from DT
- From: Liviu Dudau <Liviu.Dudau@xxxxxxx>
- Re: [PATCH v8 4/9] pci: OF: Fix the conversion of IO ranges into IO resources.
- From: Liviu Dudau <Liviu.Dudau@xxxxxxx>
- Re: [PATCH v2 2/3] ARM: dts: sti: Add st-dwc3 devicetree bindings documentation
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCHv2 5/5] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH v2 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] Doc: mfd: as3722: Add details of optional missing property
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 0/6] pinctrl: rockchip: support rk3288
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 4/4] drivers: dma-contiguous: add initialization from device tree
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: DT license
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] can: m_can: add Bosch M_CAN controller support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v3 8/9] ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v9 2/7] Documentation: bindings: add the Berlin SATA PHY
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH v9 0/7] ARM: berlin: add AHCI support
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH v9 3/7] ata: libahci: allow to use multiple PHYs
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH v9 4/7] ata: ahci_platform: add a generic AHCI compatible
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH v9 1/7] phy: add a driver for the Berlin SATA PHY
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH v9 7/7] ARM: berlin: enable the eSATA interface on the BG2Q DMP
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH v9 6/7] ARM: berlin: add the AHCI node for the BG2Q
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- [PATCH v9 5/7] Documentation: bindings: document the sub-nodes AHCI bindings
- From: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
- Re: [RFC 01/10] iommu: Add IOMMU device registry
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RESEND PATCH 2/3] iio: st_sensors: add device tree bindings
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [RESEND PATCH 2/3] iio: st_sensors: add device tree bindings
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- RE: [PATCHv2 5/5] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk
- From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
- Re: [PATCH v3 9/9] ARM: sun8i: Add reset controller nodes to the DTSI
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 7/9] ARM: sunxi: select MFD_SUN6I_PRCM when sun8i arch support is enabled
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 8/9] ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 4/9] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/9] clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gates
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/9] clk: sunxi: Add A23 APB0 divider clock support
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/13] uio_pruss: add support for devicetree and am33xx
- From: Andre Heider <a.heider@xxxxxxxxx>
- [PATCH] devicetree/bindings/powerpc/fsl: Add binding for board
- From: Priyanka Jain <Priyanka.Jain@xxxxxxxxxxxxx>
- Re: [PATCH 1/3 v5] spi: s3c64xx: fix broken "cs_gpios" usage in the driver
- From: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
- Re: [PATCH v5] ASoC: tas2552: Support TI TAS2552 Amplifier
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] of: Add vendor prefix for Dialog Semiconductor Plc
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: [PATCH v4] powerpc/powernv: hwmon driver for power, fan rpm, voltage and temperature
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3 v5] spi: s3c64xx: fix broken "cs_gpios" usage in the driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCHv2 2/5] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- RE: [PATCHv2 2/5] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
- From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
- Re: [PATCH v2 1/1] can: m_can: add Bosch M_CAN controller support
- From: Dong Aisheng <b29396@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] spi: add driver for Rockchip RK3xxx SoCs integrated SPI
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v2 2/2] spi: add driver for Rockchip RK3xxx SoCs integrated SPI
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 2/2] spi: add driver for Rockchip RK3xxx SoCs integrated SPI
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 2/2] spi: add driver for Rockchip RK3xxx SoCs integrated SPI
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v7 23/24] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] usb: gadget: Add xilinx axi usb2 device support
- From: sundeep subbaraya <sundeep.lkml@xxxxxxxxx>
- Re: [PATCH v3 1/2] usb: doc: udc-xilinx: Add devicetree bindings
- From: sundeep subbaraya <sundeep.lkml@xxxxxxxxx>
- Re: [PATCH 1/3 v5] spi: s3c64xx: fix broken "cs_gpios" usage in the driver
- From: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
- Re: [PATCH v7 10/24] rtc: max77686: Remove dead code for SMPL and WTSR.
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [PATCH v7 23/24] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- RE: [PATCH v3 2/5] PCI: designware: refactor MSI code to work with v3.65 dw hardware
- From: Mohit KUMAR DCG <Mohit.KUMAR@xxxxxx>
- RE: [PATCH v3 1/5] PCI: designware: add rd[wr]_other_conf API
- From: Mohit KUMAR DCG <Mohit.KUMAR@xxxxxx>
- Re: [PATCH] mmc: dw_mmc: add support for RK3288.
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: add support for RK3288.
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] spi: add driver for Rockchip RK3xxx SoCs integrated SPI
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [GIT PULL] bug fix for devicetree memory parsing
- From: Grant Likely <grant.likely@xxxxxxxxxx>
- Re: [PATCH v2 1/3] arm: multi_v7: enable igb, stmpe, lm95245, pwm leds
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH] video: fbdev: mxsfb.c: Cleaning up variable that is never used
- From: Marek Vasut <marex@xxxxxxx>
- Re: [GIT PULL] bug fix for devicetree memory parsing
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] video: fbdev: omap2: dss: dsi.c: Cleaning up variable that is never used
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- [PATCH] video: fbdev: mxsfb.c: Cleaning up variable that is never used
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- [PATCH] video: fbdev: mb862xx: mb862xxfbdrv.c: Cleaning up variable that is never used
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- [PATCH] video: fbdev: aty: radeon_base.c: Cleaning up variable that is never used
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- [PATCH v2] tty: serial: msm_serial.c: Cleaning up uninitialized variables
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v8 0/9] Support for creating generic PCI host bridges from DT
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH v2 0/2] Add R8A7791/Henninger board CAN DT support
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH v6] ARM: shmobile: genmai reference dts: Add RSPI node
- From: Simon Horman <horms@xxxxxxxxxxxx>
- [GIT PULL] bug fix for devicetree memory parsing
- From: Grant Likely <grant.likely@xxxxxxxxxx>
- Re: [PATCH 1/2] arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v2 REBASED 06/10] serial/arc: remove last remanants of platform data
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH v8 4/9] pci: OF: Fix the conversion of IO ranges into IO resources.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v8 4/9] pci: OF: Fix the conversion of IO ranges into IO resources.
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH v8 7/9] pci: of: Parse and map the IRQ when adding the PCI device.
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH v2 2/2] spi: add driver for Rockchip RK3xxx SoCs integrated SPI
- From: Jonas Gorski <jogo@xxxxxxxxxxx>
- Re: [PATCH v3 5/5] PCI: add PCI controller for Keystone PCIe h/w
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH v2 4/4] arm: pxa: add non device-tree timer link to clocksource
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v3 0/5] Add Keystone PCIe controller driver
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH v2 2/4] regulator: act8865: prepare support for other act88xx devices
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- Re: [PATCH 0/3] dra7: Add PCIe support
- From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Re: [PATCH v2 2/4] regulator: act8865: prepare support for other act88xx devices
- From: Axel Lin <axel.lin@xxxxxxxxxx>
- Re: [PATCH v2 1/4] regulator: act8865: set correct number of regulators in pdata
- From: Axel Lin <axel.lin@xxxxxxxxxx>
- Re: [PATCH v2 1/4] regulator: act8865: set correct number of regulators in pdata
- From: Axel Lin <axel.lin@xxxxxxxxxx>
- [PATCH v2 2/4] regulator: act8865: prepare support for other act88xx devices
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- [PATCH v2 1/4] regulator: act8865: set correct number of regulators in pdata
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- [PATCH v2 4/4] regulator: act8865: add act8846 to DT binding documentation
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- [PATCH v2 3/4] regulator: act8865: add support for act8846
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- [PATCH v2 0/4] regulator: act8865: add support for act8846
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- [PATCH] mmc: dw_mmc: add support for RK3288.
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH] video: fbdev: omap2: dss: dsi.c: Cleaning up variable that is never used
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- [PATCH] video: fbdev: mxsfb.c: Cleaning up variable that is never used
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- [PATCH] video: fbdev: mb862xx: mb862xxfbdrv.c: Cleaning up variable that is never used
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- [PATCH] video: fbdev: aty: radeon_base.c: Cleaning up variable that is never used
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 3/4] arm: pxa: add CLKSRC_OF dependency
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 2/4] clocksource: add device-tree support for PXA timer
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v3 2/2] ASoC: add driver for Rockchip RK3xxx I2S controller
- From: jianqun <xjq@xxxxxxxxxxxxxx>
- [PATCH v2 4/4] arm: pxa: add non device-tree timer link to clocksource
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 1/4] clocksource: move PXA timer to clocksource framework
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v3 1/2] ASoC: dt-bindings: add rockchip i2s bindings
- From: jianqun <xjq@xxxxxxxxxxxxxx>
- [PATCH RFC 15/15] ARM: dts: dove: add DT LCD controllers
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [PATCH RFC 13/15] drm/armada: permit CRTCs to be registered as separate devices
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [PATCH RFC 12/15] dt-bindings: add Marvell Dove LCD controller documentation
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [PATCH RFC 00/15] Armada DRM updates
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] media: soc_camera: pxa_camera device-tree support
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH v2 1/2] media: mt8m111: add device-tree suppport
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH v3 3/4] usb: gadget: pxa27x_udc device-tree documentation
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- [PATCH v2 0/3] Add ST dwc3 glue layer driver.
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 2/3] ARM: dts: sti: Add st-dwc3 devicetree bindings documentation
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- Re: [PATCH 2/3] ARM: dts: sti: Add st-dwc3 devicetree bindings documentation
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- Re: [PATCH 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- Re: [PATCH v4] powerpc/powernv: hwmon driver for power, fan rpm, voltage and temperature
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 2/4] pinctrl: Add NVIDIA Tegra XUSB pad controller support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 1/4] of: Add NVIDIA Tegra XUSB pad controller binding
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH V5 2/3] Documentation: gpio: Add APM X-Gene SoC GPIO controller DTS binding
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH V5 1/3] gpio: Add APM X-Gene SoC GPIO controller support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH V5 1/3] gpio: Add APM X-Gene SoC GPIO controller support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] ARM: dts: exynos5410: Fill in CPU clock-frequency
- From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
- Re: [PATCH v4] phy: Renesas R-Car Gen2 PHY driver
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH v7 01/24] mfd: max77686: Convert to use regmap_irq
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 02/24] mfd: max77686: Add power management support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 03/24] mfd: max77686: Don't define dummy function if OF isn't enabled
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 04/24] mfd: max77686: Make platform data over-rule DT
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 05/24] mfd: max77686: Return correct error when pdata isn't found
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 06/24] mfd: max77686: Make error checking consistent
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 08/24] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 07/24] mfd: max77686: Remove unneeded OOM error message
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 09/24] rtc: max77686: Allow the max77686 rtc to wakeup the system
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 11/24] clk: max77686: Add DT include for MAX77686 PMIC clock
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 10/24] rtc: max77686: Remove dead code for SMPL and WTSR.
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 13/24] clk: max77686: Convert to the generic max clock driver
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 12/24] clk: Add generic driver for Maxim PMIC clocks
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 14/24] clk: max77686: Improve Maxim 77686 PMIC clocks binding
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 16/24] regulator: max77686: Setup DVS-related GPIOs on probe
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 15/24] regmap: Add regmap_reg_copy function
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 17/24] mfd: max77686: Add documentation for DVS bindings
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 18/24] mfd: max77686: Add Maxim 77802 PMIC support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 19/24] mfd: max77802: Add DT binding documentation
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 21/24] clk: Add driver for Maxim 77802 PMIC clocks
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 20/24] regulator: Add driver for Maxim 77802 PMIC regulators
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 22/24] clk: max77802: Add DT binding documentation
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 24/24] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 23/24] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v7 00/24] Add Maxim 77802 PMIC support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] dts: add devicetree bindings for pxa27x clocks
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH 1/2] ASoC: samsung: Update sound-card name for Snow
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 2/2] spi: add driver for Rockchip RK3xxx SoCs integrated SPI
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
- From: Emil Goode <emilgoode@xxxxxxxxx>
- Re: [PATCH v3] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] dmaengine: mpc512x: add device tree binding document
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH v2 1/2] ASoC: dt-bindings: add rockchip i2s bindings
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH v3 1/2] usb: doc: udc-xilinx: Add devicetree bindings
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [RFC v4 2/2] backlight: device tree: add new tps611xx backlight binding
- From: Mark Rutland <mark.rutland@xxxxxxx>
- [PATCH] of/platform: Fix of_platform_device_destroy iteration of devices
- From: Grant Likely <grant.likely@xxxxxxxxxx>
- [PATCH v4] devicetree: Add generic IOMMU device tree bindings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v7 4/6] pci: Introduce a domain number for pci_host_bridge.
- From: Liviu Dudau <Liviu.Dudau@xxxxxxx>
- Re: [RFC 01/10] iommu: Add IOMMU device registry
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [RFC 01/10] iommu: Add IOMMU device registry
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v2 2/7] pwm: add support for atmel-hlcdc-pwm device
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM.
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
- Re: [PATCH v6 22/23] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 09/19] clocksource: sh_cmt: Add DT support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH V3 2/2] ASoC: samsung: Add machine driver for Odroid X2/U3
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- [PATCH V3 1/2] doc: dt bindings: Document Odroid X2/U3 audio subsystem bindings
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- Re: [PATCH v6 22/23] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [PATCH V4 00/10] drm: exynos: few patches to enhance bridge chip support
- From: Andreas Färber <afaerber@xxxxxxx>
- RE: [PATCH] of: Add vendor prefix for Dialog Semiconductor Plc
- From: "Opensource [Steve Twiss]" <stwiss.opensource@xxxxxxxxxxx>
- Re: [PATCH v2 1/1] can: m_can: add Bosch M_CAN controller support
- From: Varka Bhadram <varkabhadram@xxxxxxxxx>
- Re: [PATCH v6 22/23] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: at_xdmac: add bindings documentation
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
- From: Daniele Forsi <dforsi@xxxxxxxxx>
- Re: [PATCH 2/3] ARM: dts: sti: Add st-dwc3 devicetree bindings documentation
- From: Daniele Forsi <dforsi@xxxxxxxxx>
- Re: [PATCH v2 1/1] can: m_can: add Bosch M_CAN controller support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v6 22/23] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [PATCH v2 1/1] can: m_can: add Bosch M_CAN controller support
- From: Dong Aisheng <b29396@xxxxxxxxxxxxx>
- Re: [PATCH v2 4/4] ARM: sti: Add STiH407 reset controller support.
- From: Maxime Coquelin <maxime.coquelin@xxxxxx>
- Re: [PATCH v2 3/4] ARM: sti: Add STiH407 Kconfig entry to select STIH407_RESET
- From: Maxime Coquelin <maxime.coquelin@xxxxxx>
- Re: [GIT PULL] STiH407 reset controller support
- From: Maxime Coquelin <maxime.coquelin@xxxxxx>
- Re: [PATCH v6 17/23] mfd: max77686: Add Maxim 77802 PMIC support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 08/23] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: exynos5410: Fill in CPU clock-frequency
- From: Andreas Färber <afaerber@xxxxxxx>
- Re: [PATCH v6 17/23] mfd: max77686: Add Maxim 77802 PMIC support
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [alsa-devel] [PATCH 2/2] ASoC: samsung: Add machine driver for odroidx2
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [alsa-devel] [PATCH 2/2] ASoC: samsung: Add machine driver for odroidx2
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- Re: [PATCHv2 4/5] ARM: dts: rockchip: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- Re: [PATCH v6 08/23] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [PATCH 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH 2/3] ARM: dts: sti: Add st-dwc3 devicetree bindings documentation
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH 0/3] Add ST dwc3 glue layer driver.
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- Re: [alsa-devel] [PATCH 2/2] ASoC: samsung: Add machine driver for odroidx2
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH 1/1] iommu/fsl_pamu: Remove unnecessary null test before kfree
- From: Joerg Roedel <joro@xxxxxxxxxx>
- Re: [PATCHv2 0/5] ARM: remove the sub-node and deprecated supports-highspeed property for dwmmc.
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [RFC 01/10] iommu: Add IOMMU device registry
- From: Joerg Roedel <joro@xxxxxxxxxx>
- Re: [PATCH 2/2] ASoC: samsung: Add machine driver for odroidx2
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- Re: [PATCH v6 06/23] mfd: max77686: Make error checking consistent
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [PATCH v6 02/23] mfd: max77686: Add power management support
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [PATCH] of: Add vendor prefix for Dialog Semiconductor Plc
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- RE: [PATCH 5/5] ARM: imx: Add Freescale LS1021A SMP support
- From: Jingchang Lu <jingchang.lu@xxxxxxxxxxxxx>
- [PATCH v3 5/6] devicetree: mfd: max14577: Add device tree bindings document
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [PATCH v4 0/6] clk: sunxi: fixes, cleanups and A23 basic clocks
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v6 01/23] mfd: max77686: Convert to use regmap_irq
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 02/23] mfd: max77686: Add power management support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 03/23] mfd: max77686: Don't define dummy function if OF isn't enabled
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 04/23] mfd: max77686: Make platform data over-rule DT
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 05/23] mfd: max77686: Return correct error when pdata isn't found
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 07/23] mfd: max77686: Remove unneeded OOM error message
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 06/23] mfd: max77686: Make error checking consistent
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 08/23] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 09/23] rtc: max77686: Allow the max77686 rtc to wakeup the system
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 11/23] clk: Add generic driver for Maxim PMIC clocks
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 10/23] clk: max77686: Add DT include for MAX77686 PMIC clock
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 12/23] clk: max77686: Convert to the generic max clock driver
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 13/23] clk: max77686: Improve Maxim 77686 PMIC clocks binding
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 14/23] regmap: Add regmap_reg_copy function
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 15/23] regulator: max77686: Setup DVS-related GPIOs on probe
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 16/23] mfd: max77686: Add documentation for DVS bindings
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 18/23] mfd: max77802: Add DT binding documentation
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 17/23] mfd: max77686: Add Maxim 77802 PMIC support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 20/23] clk: Add driver for Maxim 77802 PMIC clocks
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 19/23] regulator: Add driver for Maxim 77802 PMIC regulators
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 21/23] clk: max77802: Add DT binding documentation
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 22/23] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 23/23] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v6 00/23] Add Maxim 77802 PMIC support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH 3/8] clk: mvebu: extend clk-cpu for dynamic frequency scaling
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: at_xdmac: add bindings documentation
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH v2 1/2] ARM: topology: Use a clock if possible to get the CPU frequency
- From: Vincent Guittot <vincent.guittot@xxxxxxxxxx>
- Re: [PATCH v3] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
- From: Emil Goode <emilgoode@xxxxxxxxx>
- Re: [PATCH 05/18] power: reset: Add AT91 reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 02/10] devicetree: Add generic IOMMU device tree bindings
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2 0/4] Tegra USB probe order issue fix
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH 05/18] power: reset: Add AT91 reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] ARM: dts: at_xdmac: add bindings documentation
- From: Mark Rutland <mark.rutland@xxxxxxx>
- [PATCH 2/2] ASoC: core: Fix possible NULL pointer dereference
- From: Tushar Behera <tushar.b@xxxxxxxxxxx>
- [PATCH 1/2] ASoC: samsung: Update sound-card name for Snow
- From: Tushar Behera <tushar.b@xxxxxxxxxxx>
- Re: [PATCH 2/6] mailbox/omap: add support for parsing dt devices
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RESEND PATCH 5/5] devicetree: mfd: max14577: Add device tree bindings document
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [RESEND PATCH 5/5] devicetree: mfd: max14577: Add device tree bindings document
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH 2/6] mailbox/omap: add support for parsing dt devices
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v2 1/2] ARM: topology: Use a clock if possible to get the CPU frequency
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 5/5] devicetree: mfd: max14577: Add device tree bindings document
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [PATCH v2 2/2] ARM: dts: at_xdmac: add bindings documentation
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- [PATCH v2 1/2] dma: at_xdmac: creation of the atmel eXtended DMA Controller driver
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- [PATCH v2 0/2] new Atmel DMA controller
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- [PATCH v2 2/2] ASoC: add driver for Rockchip RK3xxx I2S controller
- From: jianqun <xjq@xxxxxxxxxxxxxx>
- [PATCH v2 1/2] ASoC: dt-bindings: add rockchip i2s bindings
- From: jianqun <xjq@xxxxxxxxxxxxxx>
- [PATCH v2] ASoC: tda998x: add a codec to the HDMI transmitter
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [PATCH 05/18] power: reset: Add AT91 reset driver
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 REBASED 00/10] Generic earlyconsole for ARC UART Driver
- From: Vineet Gupta <Vineet.Gupta1@xxxxxxxxxxxx>
- RE: [PATCH v3 02/10] devicetree: Add generic IOMMU device tree bindings
- From: Varun Sethi <Varun.Sethi@xxxxxxxxxxxxx>
- Re: [PATCH 2/6] mailbox/omap: add support for parsing dt devices
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 4/5] ARM: imx: Add initial support for Freescale LS1021A
- From: Jingchang Lu <jingchang.lu@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
- From: pramod gurav <pramod.gurav.etc@xxxxxxxxx>
- RE: [PATCH v3 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
- From: "Pramod Gurav" <pramod.gurav@xxxxxxxxxxxxxxx>
- Re: [PATCH 05/18] power: reset: Add AT91 reset driver
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCHv5 03/15] hwspinlock/core: maintain a list of registered hwspinlock banks
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [PATCHv5 04/15] hwspinlock/core: add common OF helpers
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- [PATCH][v2] devicetree/binding/powerpc/fsl: Add binding for CPLD
- From: Priyanka Jain <Priyanka.Jain@xxxxxxxxxxxxx>
- RE: [PATCH] devicetree/binding/powerpc/fsl: Add binding for CPLD
- From: Priyanka Jain <Priyanka.Jain@xxxxxxxxxxxxx>
- Re: [PATCH 00/14] cpufreq: cpu0: Extend support beyond CPU0, V2
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- RE: [PATCH] devicetree/bindings: Add binding for micron n25q512a memory
- From: Priyanka Jain <Priyanka.Jain@xxxxxxxxxxxxx>
- Re: [PATCH 05/18] power: reset: Add AT91 reset driver
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH 0/4] Migrate PXA27x platforms to clock framework
- From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
- [PATCH] drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM.
- From: Michael Welling <mwelling@xxxxxxxx>
- [PATCH v2 4/4] USB: PHY: tegra: Call tegra_usb_phy_close only on device removal
- From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
- [PATCH v2 1/4] USB: tegra: Add resets & has-utmi-pad-registers flag to the PHY binding
- From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
- [PATCH v2 3/4] USB: EHCI: tegra: Fix probe order issue leading to broken USB
- From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
- [PATCH v2 2/4] ARM: tegra: Add resets & has-utmi-pad-registers flag to all USB PHYs
- From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
- [PATCH v2 0/4] Tegra USB probe order issue fix
- From: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx>
- Re: [PATCH v3] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: hsmmc: Add reset gpio configuration option.
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: hsmmc: Add reset gpio configuration option.
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/4] clk: add pxa27x clock drivers
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH 00/14] cpufreq: cpu0: Extend support beyond CPU0, V2
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [PATCH 0/4] Migrate PXA27x platforms to clock framework
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH] devicetree/bindings: Add binding for micron n25q512a memory
- From: Scott Wood <scottwood@xxxxxxxxxxxxx>
- Re: [PATCH 2/4] dts: add devicetree bindings for pxa27x clocks
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- [PATCH 2/2] Documentation: devicetree: mmc: Document reset-gpio property
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH 1/2] mmc: hsmmc: Add reset gpio configuration option.
- From: Marek Belisko <marek@xxxxxxxxxxxxx>
- [PATCH v3] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- [PATCH v3] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
- From: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 2/2] ARM: shmobile: henninger: add CAN0 DT support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/2] ARM: shmobile: r8a7791: add CAN DT support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 0/2] Add R8A7791/Henninger board CAN DT support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] spi: dw-mmio: add devicetree support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [RFC] drm/msm: DT support for 8960/8064
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH 12/18] power: reset: Add AT91 poweroff driver
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] devicetree/binding/powerpc/fsl: Add binding for CPLD
- From: Scott Wood <scottwood@xxxxxxxxxxxxx>
- Re: [PATCH v4] ARM: perf: save/restore pmu registers in pm notifier
- From: Will Deacon <will.deacon@xxxxxxx>
- Re: [PATCHv5 04/15] hwspinlock/core: add common OF helpers
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCHv5 03/15] hwspinlock/core: maintain a list of registered hwspinlock banks
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH/RFC V8 1/1] clk: Support for clock parents and rates assigned from device tree
- From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: shmobile: r8a7791: add CAN DT support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [RFC] drm/msm: DT support for 8960/8064
- From: sviau@xxxxxxxxxxxxxx
- [PATCH v5] ASoC: tas2552: Support TI TAS2552 Amplifier
- From: Dan Murphy <dmurphy@xxxxxx>
- Re: [PATCH] ASoC: tda998x: add a codec to the HDMI transmitter
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [PATCH v2 0/2] ASoC: add CSR SiRFSoC audio USP interface driver
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 3/5] regulator: act8865: prepare support for other act88xx devices
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/5] regulator: act8865: set correct number of regulators in pdata
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/5] regulator: act8865: set correct number of regulators in pdata
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 3/3 V2] irqchip: gic: Add supports for ARM GICv2m MSI(-X)
- From: Suravee Suthikulanit <suravee.suthikulpanit@xxxxxxx>
- Re: [PATCH 09/18] AT91: Call at91_register_devices in the board files
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- Re: [PATCH] ASoC: tda998x: add a codec to the HDMI transmitter
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2] Documentation: devicetree: Fix tps65090 typos in example
- From: Andreas Färber <afaerber@xxxxxxx>
- Re: [PATCH] ASoC: tda998x: add a codec to the HDMI transmitter
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [PATCH v4] ASoC: tas2552: Support TI TAS2552 Amplifier
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v4] ASoC: tas2552: Support TI TAS2552 Amplifier
- From: Dan Murphy <dmurphy@xxxxxx>
- Re: [PATCH 4/5] ARM: imx: Add initial support for Freescale LS1021A
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH v4] ASoC: tas2552: Support TI TAS2552 Amplifier
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 05/18] power: reset: Add AT91 reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 03/18] AT91: G45: DT: Declare a second ram controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 12/18] power: reset: Add AT91 poweroff driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4] ASoC: tas2552: Support TI TAS2552 Amplifier
- From: Dan Murphy <dmurphy@xxxxxx>
- Re: [PATCH 09/18] AT91: Call at91_register_devices in the board files
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 10/18] AT91: Call at91_register_devices in the board files
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 04/18] AT91: Rework ramc mapping code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 5/9] serial: 8250_dw: Add optional reset control support
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v3 6/9] serial: 8250_dw: Add support for deferred probing
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v3 2/9] clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gates
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v3 9/9] ARM: sun8i: Add reset controller nodes to the DTSI
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v3 7/9] ARM: sunxi: select MFD_SUN6I_PRCM when sun8i arch support is enabled
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v3 8/9] ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v3 4/9] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v3 0/9] ARM: sun8i: Support A23 PRCM clock and reset controllers
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v3 1/9] clk: sunxi: Add A23 APB0 divider clock support
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v3 3/9] clk: sunxi: Add A23 specific compatible to sun6i-a31-apb0-gates-clk
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH V4 00/10] drm: exynos: few patches to enhance bridge chip support
- From: Ajay kumar <ajaynumb@xxxxxxxxx>
- Re: [PATCH 12/18] power: reset: Add AT91 poweroff driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 11/18] AT91: Remove reset code the machine code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 17/18] AT91: Remove rstc and shdwnc global base addresses
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 09/18] AT91: Probe the reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 14/18] AT91: Register the poweroff driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 15/18] AT91: Remove poweroff code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4] ASoC: tas2552: Support TI TAS2552 Amplifier
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH RESEND 13/18] AT91: DT: Remove poweroff DT probing
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 18/18] AT91: Remove rstc and shdwc headers
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 04/18] AT91: Rework ramc mapping code
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH RESEND 00/18] AT91: cleanup of the reset and poweroff code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 06/18] power: reset: Add AT91 reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 07/18] AT91: DT: Remove the old-style reset probing
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 08/18] AT91: soc: Introduce register_devices callback
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 05/18] AT91: SAMA5D3: DT: Add shutdown controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 16/18] AT91: pm: Remove show_reset_status function
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 04/18] AT91: Rework ramc mapping code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 01/18] power: reset: Add if statement isntead of multiple depends on
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH RESEND 02/18] AT91: setup: Switch to pr_fmt
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 05/18] power: reset: Add AT91 reset driver
- From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- [PATCH v4] ASoC: tas2552: Support TI TAS2552 Amplifier
- From: Dan Murphy <dmurphy@xxxxxx>
- [PATCH 07/18] AT91: soc: Introduce register_devices callback
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 09/18] AT91: Call at91_register_devices in the board files
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 08/18] AT91: soc: Introduce register_devices callback
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 08/18] AT91: Probe the reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 09/18] AT91: Probe the reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 10/18] AT91: Call at91_register_devices in the board files
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 11/18] AT91: Remove reset code the machine code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 0/2] phy: add hix5hd2-sata-phy driver
- From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
- [PATCH v3 1/2] Documentation: Document Hisilicon hix5hd2 sata PHY
- From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
- [PATCH v3 2/2] phy: add hix5hd2-sata-phy driver
- From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
- [PATCH 10/18] AT91: Remove reset code the machine code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 12/18] power: reset: Add AT91 poweroff driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 12/18] AT91: DT: Remove poweroff DT probing
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 13/18] AT91: DT: Remove poweroff DT probing
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 11/18] power: reset: Add AT91 poweroff driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 01/18] power: reset: Add if statement isntead of multiple depends on
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 13/18] AT91: Register the poweroff driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 14/18] AT91: Register the poweroff driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 14/18] AT91: Remove poweroff code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 15/18] AT91: Remove poweroff code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 15/18] AT91: pm: Remove show_reset_status function
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 16/18] AT91: pm: Remove show_reset_status function
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 02/18] AT91: setup: Switch to pr_fmt
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 16/18] AT91: Remove rstc and shdwnc global base addresses
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 18/18] AT91: Rework ramc mapping code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 5/5] ARM: configs: omap2plus_defconfig: enable TPS65218 configs
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 4/5] ARM: dts: AM437x: Add TPS65218 device tree nodes
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 17/18] AT91: Remove rstc and shdwnc global base addresses
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 18/18] AT91: Remove rstc and shdwc headers
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 03/18] AT91: G45: DT: Declare a second ram controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 17/18] AT91: Remove rstc and shdwc headers
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 04/18] AT91: Rework ramc mapping code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 04/18] AT91: SAMA5D3: DT: Add shutdown controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 05/18] AT91: SAMA5D3: DT: Add shutdown controller
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 05/18] power: reset: Add AT91 reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 06/18] AT91: DT: Remove the old-style reset probing
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 06/18] power: reset: Add AT91 reset driver
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 00/18] AT91: cleanup of the reset and poweroff code
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/5] ARM: dts: AM43x: Add TPS65218 device tree nodes
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 07/18] AT91: DT: Remove the old-style reset probing
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] regulator: Add DT bindings for tps65218 PMIC regulators
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/5] mfd: Add DT bindings for tps65218 PMIC
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v5 1/2] libahci: Implement the function ahci_restart_engine to restart the port dma engine.
- From: Tejun Heo <tj@xxxxxxxxxx>
- [PATCH 2/5] regulator: Add DT bindings for tps65218 PMIC regulators.
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 1/5] mfd: Add DT bindings for tps65218 PMIC
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 4/5] ARM: dts: AM437x: Add TPS65218 device tree nodes
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 3/5] ARM: dts: AM43x: Add TPS65218 device tree nodes
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 5/5] ARM: configs: omap2plus_defconfig: enable TPS65218 configs
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 0/5] ARM: dts: AM43x: Add devcice tree nodes
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH] ASoC: tda998x: add a codec to the HDMI transmitter
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/3] Add Qualcomm crypto driver
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/4] Doc/DT: Add SiI9022 binding documentation
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v2 3/7] drm: add Atmel HLCDC Display Controller support
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [GIT PULL] STiH407 reset controller support
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: [PATCH] ASoC: tda998x: add a codec to the HDMI transmitter
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- [RFC PATCH v2 5/5] dt: rtc: add binding document for qpnp rtc
- From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
- [RFC PATCH v2 4/5] dt: msm8974: add qpnp rtc device node
- From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
- [RFC PATCH v2 3/5] rtc: add qpnp rtc driver
- From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
- Re: [PATCH 0/2] drm/panel: add support for Foxlink FL500WVR00-A0T panel
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- [RFC PATCH v2 2/5] dt: qcom: msm8974: add qpnp-spmi device nodes
- From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
- [RFC PATCH v2 1/5] mfd: qpnp: add support for Qualcomm QPNP PMICs
- From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
- [RFC PATCH v2 0/5] Support for Qualcomm QPNP PMIC's
- From: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
- Re: [PATCH 11/16] ARM: mvebu: dts: Add CA9 MPcore SoC Controller node
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v6] ARM: shmobile: genmai reference dts: Add RSPI node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] ASoC: tda998x: add a codec to the HDMI transmitter
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH] irqchip: gic: Add support for cortex a7 compatible string
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [RESEND PATCH 5/5] devicetree: mfd: max14577: Add device tree bindings document
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [RESEND PATCH 5/5] devicetree: mfd: max14577: Add device tree bindings document
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH] ASoC: tda998x: add a codec to the HDMI transmitter
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [RFC] drm/msm: DT support for 8960/8064
- From: Rob Clark <robdclark@xxxxxxxxx>
- Re: [PATCH] ASoC: tda998x: add a codec to the HDMI transmitter
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 5/7] ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH 1/3] can: m_can: add Bosch M_CAN controller support
- From: Dong Aisheng <b29396@xxxxxxxxxxxxx>
- Re: [PATCH RFC v3 2/2] memory: pl353: Add driver for arm pl353 static memory controller
- From: Arnd Bergmann <arnd@xxxxxxxx>
- RE: [RFC 01/10] iommu: Add IOMMU device registry
- From: Varun Sethi <Varun.Sethi@xxxxxxxxxxxxx>
- Re: [PATCH v8 2/9] pci: Export find_pci_host_bridge() function.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2 0/4] Add reset controllers for STiH407 SoC
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- RE: [PATCH 4/5] ARM: imx: Add initial support for Freescale LS1021A
- From: Jingchang Lu <jingchang.lu@xxxxxxxxxxxxx>
- [PATCH] devicetree/bindings: Add binding for micron n25q512a memory
- From: Priyanka Jain <Priyanka.Jain@xxxxxxxxxxxxx>
- Re: [PATCH 1/5] ARM: dts: Add SoC level device tree support for LS1021A
- From: Mark Rutland <mark.rutland@xxxxxxx>
- [PATCH] devicetree/binding/powerpc/fsl: Add binding for CPLD
- From: Priyanka Jain <Priyanka.Jain@xxxxxxxxxxxxx>
- Re: [PATCH RFC V2 2/2] net: qualcomm: new Ethernet over SPI driver for QCA7000
- From: Tobias Klauser <tklauser@xxxxxxxxxx>
- Re: [PATCH v8 2/9] pci: Export find_pci_host_bridge() function.
- From: Liviu Dudau <Liviu.Dudau@xxxxxxx>
- [PATCH 2/2] ARM: DTS: am335x-evmsk: Enable the McASP FIFO for audio
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 1/2] ARM: DTS: am335x-evm: Enable the McASP FIFO for audio
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v2 0/4] Add reset controllers for STiH407 SoC
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v2 0/4] Add reset controllers for STiH407 SoC
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 1/3] can: m_can: add Bosch M_CAN controller support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [RFC] drm/msm: DT support for 8960/8064
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH 1/3] can: m_can: add Bosch M_CAN controller support
- From: Dong Aisheng <b29396@xxxxxxxxxxxxx>
- RE: [PATCH] mtd: nand: stm_nand_bch: add new driver
- From: "Gupta, Pekon" <pekon@xxxxxx>
- Re: [RFC v4 2/2] backlight: device tree: add new tps611xx backlight binding
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH 1/3] can: m_can: add Bosch M_CAN controller support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] can: m_can: add Bosch M_CAN controller support
- From: Dong Aisheng <b29396@xxxxxxxxxxxxx>
- Re: [PATCH 3/3 V2] irqchip: gic: Add supports for ARM GICv2m MSI(-X)
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH v2] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] arm: dra7xx: Add hwmod data for pcie1 and pcie2 subsystems
- From: Rajendra Nayak <rnayak@xxxxxx>
- Re: [PATCH 1/2] arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy
- From: Rajendra Nayak <rnayak@xxxxxx>
- Re: [PATCH v2 0/4] Add reset controllers for STiH407 SoC
- From: Maxime Coquelin <maxime.coquelin@xxxxxx>
- Re: [PATCH] mtd: nand: stm_nand_bch: add new driver
- From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH 1/5] ARM: dts: Add SoC level device tree support for LS1021A
- From: Jingchang Lu <jingchang.lu@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] ARM: topology: Use a clock if possible to get the CPU frequency
- From: Vincent Guittot <vincent.guittot@xxxxxxxxxx>
- Re: [PATCH v4 0/6] clk: sunxi: fixes, cleanups and A23 basic clocks
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v4 0/6] clk: sunxi: fixes, cleanups and A23 basic clocks
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCHv5 05/15] hwspinlock/omap: add support for dt nodes
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [PATCH v2 0/4] Add reset controllers for STiH407 SoC
- From: Maxime Coquelin <maxime.coquelin@xxxxxx>
- Re: [PATCHv5 04/15] hwspinlock/core: add common OF helpers
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [PATCH v2 1/2] ARM: topology: Use a clock if possible to get the CPU frequency
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] can: m_can: add Bosch M_CAN controller support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCHv5 03/15] hwspinlock/core: maintain a list of registered hwspinlock banks
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [PATCH 0/4] Migrate PXA27x platforms to clock framework
- From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
- Re: [PATCH 2/4] dts: add devicetree bindings for pxa27x clocks
- From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
- Re: [PATCH 1/4] clk: add pxa27x clock drivers
- From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
- [RFC v4 1/2] backlight: add new tps611xx backlight driver
- From: Daniel Jeong <gshark.jeong@xxxxxxxxx>
- [RFC v4 2/2] backlight: device tree: add new tps611xx backlight binding
- From: Daniel Jeong <gshark.jeong@xxxxxxxxx>
- [RFC v4 0/2] backlight: add new tps611xx backlight driver
- From: Daniel Jeong <gshark.jeong@xxxxxxxxx>
- Re: [PATCH] ASoC: tda998x: add a codec to the HDMI transmitter
- From: Jean-Francois Moine <moinejf@xxxxxxx>
- Re: [PATCH V4 00/10] drm: exynos: few patches to enhance bridge chip support
- From: Andreas Färber <afaerber@xxxxxxx>
- [PATCH v4] pcie: Add Xilinx PCIe Host Bridge IP driver
- From: Srikanth Thokala <sthokal@xxxxxxxxxx>
- Re: [PATCH 1/3] can: m_can: add Bosch M_CAN controller support
- From: Dong Aisheng <b29396@xxxxxxxxxxxxx>
- Re: [PATCH 00/14] cpufreq: cpu0: Extend support beyond CPU0, V2
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- [PATCH RESEND v7 0/3] Add ES8328 audio codec
- From: Sean Cross <xobs@xxxxxxxxxx>
- [PATCH RESEND v7 3/3] ASoC: fsl: add imx-es8328 machine driver
- From: Sean Cross <xobs@xxxxxxxxxx>
- [PATCH RESEND v7 2/3] ASoC: add es8328 codec driver
- From: Sean Cross <xobs@xxxxxxxxxx>
- [PATCH RESEND v7 1/3] devicetree: bindings: Add Everest Semicodunctor
- From: Sean Cross <xobs@xxxxxxxxxx>
- Re: [PATCH v2] i2c: busses: i2c-pxa.c: Fix for possible null pointer dereferenc
- From: Jingoo Han <jg1.han@xxxxxxxxxxx>
- Re: [PATCH 00/14] cpufreq: cpu0: Extend support beyond CPU0, V2
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH] mtd: nand: stm_nand_bch: add new driver
- From: Brian Norris <computersforpeace@xxxxxxxxx>
- [PATCH v5 09/14] dt-bindings: add documentation for rk3288 cru
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH v5 07/14] dt-bindings: add documentation for rk3188 clock and reset unit
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH 2/2] ARM: shmobile: henninger: add CAN0 DT support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] ARM: shmobile: r8a7791: add CAN DT support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/2] Add R8A7791/Henninger board CAN DT support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/6] clk: sunxi: fixes, cleanups and A23 basic clocks
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [PATCH] rcar_can: add device tree support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCHv5 04/15] hwspinlock/core: add common OF helpers
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCHv5 03/15] hwspinlock/core: maintain a list of registered hwspinlock banks
- From: Suman Anna <s-anna@xxxxxx>
- Re: [RFC] drm/msm: DT support for 8960/8064
- From: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
- Re: [RFC] drm/msm: DT support for 8960/8064
- From: Rob Clark <robdclark@xxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]
