On 07/04/2014 01:04 PM, Sylwester Nawrocki wrote:
On 22/05/14 20:53, Mark Brown wrote:
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+ | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
+ | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
These are constant, set these in the dai_link.
set_fmt also sets master/slave mode of the I2S DAI, after I moved
this into the cpu_dai link data structure after suspend/resume cycle
the I2S IP block is not being properly re-configured. Should the
format setting be added in resume_post callback, or is there any
other preferred way ? Similarly the syclk settings are being lost
over suspend/resume cycle and nothing restores them.
The I2S driver should save and restore it's register during suspend/resume.
- Lars
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
