Any word from the devicetree folks?
On Sun, Jun 29, 2014 at 04:16:58PM +0200, Hans de Goede wrote:
> From: Arend van Spriel <arend@xxxxxxxxxxxx>
>
> The Broadcom bcm43xx sdio devices are fullmac devices that may be
> integrated in ARM platforms. Currently, the brcmfmac driver for
> these devices support use of platform data. This patch specifies
> the bindings that allow this platform data to be expressed in the
> devicetree.
>
> Reviewed-by: Hante Meuleman <meuleman@xxxxxxxxxxxx>
> Reviewed-by: Franky (Zhenhui) Lin <frankyl@xxxxxxxxxxxx>
> Reviewed-by: Daniel (Deognyoun) Kim <dekim@xxxxxxxxxxxx>
> Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
> Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
> [hdegoede@xxxxxxxxxx: drop clk / reg_on gpio handling, as there is no consensus
> on how to handle this yet]
> [hdegoede@xxxxxxxxxx: move from bindings/staging to bindings]
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> .../bindings/net/wireless/brcm,bcm43xx-fmac.txt | 41 ++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>
> diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
> new file mode 100644
> index 0000000..5dbf169
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
> @@ -0,0 +1,41 @@
> +Broadcom BCM43xx Fullmac wireless SDIO devices
> +
> +This node provides properties for controlling the Broadcom wireless device. The
> +node is expected to be specified as a child node to the SDIO controller that
> +connects the device to the system.
> +
> +Required properties:
> +
> + - compatible : Should be "brcm,bcm4329-fmac".
> +
> +Optional properties:
> + - brcm,drive-strength : drive strength used for SDIO pins on device in mA
> + (default = 6).
> + - interrupt-parent : the phandle for the interrupt controller to which the
> + device interrupts are connected.
> + - interrupts : specifies attributes for the out-of-band interrupt (host-wake).
> + When not specified the device will use in-band SDIO interrupts.
> + - interrupt-names : name of the out-of-band interrupt, which must be set
> + to "host-wake".
> +
> +Example:
> +
> +mmc3: mmc@01c12000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc3_pins_a>;
> + vmmc-supply = <®_vmmc3>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +
> + brcmf: bcrmf@1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + interrupt-parent = <&pio>;
> + interrupts = <10 8>; /* PH10 / EINT10 */
> + interrupt-names = "host-wake";
> + };
> +};
> --
> 2.0.0
>
>
--
John W. Linville Someday the world will need a hero, and you
linville@xxxxxxxxxxxxx might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
