On Thu, Jul 03, 2014 at 07:01:17AM +0100, Daniel Jeong wrote:
> This commit is about tps611xx device tree documentation.
>
> Signed-off-by: Daniel Jeong <gshark.jeong@xxxxxxxxx>
> ---
> .../video/backlight/tps611xx-backlight.txt | 24 ++++++++++++++++++++
> 1 file changed, 24 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/video/backlight/tps611xx-backlight.txt
>
> diff --git a/Documentation/devicetree/bindings/video/backlight/tps611xx-backlight.txt b/Documentation/devicetree/bindings/video/backlight/tps611xx-backlight.txt
> new file mode 100644
> index 0000000..7af8182
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/backlight/tps611xx-backlight.txt
> @@ -0,0 +1,24 @@
> +TPS611xx family of backlight driver based on EasyScale.
> +
> +EasyScale is a simple but flexible one pin interface to configure the current.
> +
> +Required properties:
> +- compatible: should contain at least one of
> + "ti,tps61158_bl"
> + "ti,tps61161_bl"
> + "ti,tps61163_bl"
> + "ti,tps61165_bl"
In v3 I asked you to get rid of the "_bl" suffix.
> +- rfa-enable: enable request for acknowledge.
> + If RFA is enabled, the data byte includes the RFA bit and device will wait
> + and check acknowledge from device.
You didn't answer my question as to why this should be in the DT.
> +- es-gpio : GPIO for easy-scale communication.(see GPIO binding[0])
> +
> +[0]: Documentation/devicetree/bindings/gpio/gpio.txt
> +
> +Example:
> +
> + backlight {
> + compatible = "ti,tps61163";
This now doesn't match the Documentation above.
Thanks,
Mark.
> + rfa-enable;
> + es-gpio = <&gpio 45 0>;
> + };
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
