Re: [PATCH v4] powerpc/powernv: hwmon driver for power, fan rpm, voltage and temperature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 07/06/2014 11:56 PM, Benjamin Herrenschmidt wrote:
On Fri, 2014-07-04 at 19:25 -0700, Guenter Roeck wrote:
+cooling-fan#8-data {
+     sensor-id = <0x7052107>;
+     phandle = <0x10000028>;
+     linux,phandle = <0x10000028>;
+     compatible = "ibm,opal-sensor-cooling-fan";

phandle and linux-phandle are neither documented nor used. Either
document or drop.

They are core device-tree stuff, as such they are used potentially
anywhere and afaik can be / are generated by DTC but yes, this is
not the place to document them.


Turns out they are documented elsewhere. See
Documentation/devicetree/booting-without-of.txt.

Or rather, "phandle" is, "linux,phandle" is an older variant used
for backward compatibility that our firmware still generates but
definitely something we can strip from the doc.


Both are not mentioned in any other bindings, so my take is they should
not be mentioned here either.

Thanks,
Guenter

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux