Hello Rickard,
Since this is a probe function there is also no need to release the devm_*
resources in the i2c_pxa_remove function, this leads to double free.
Also I have a few nit-pick comments below.
On Thu, Jul 03, 2014 at 10:19:16PM +0200, Rickard Strandqvist wrote:
> Fix for possible null pointer dereferenc, and there is a risk for memory leak if something unexpected happens and the function returns.
> It now use Managed Device Resource instead.
>
> Signed-off-by: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-pxa.c | 37 ++++++++++++++++---------------------
> 1 file changed, 16 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
> index be671f7..2edb633 100644
> --- a/drivers/i2c/busses/i2c-pxa.c
> +++ b/drivers/i2c/busses/i2c-pxa.c
> @@ -1141,10 +1141,10 @@ static int i2c_pxa_probe(struct platform_device *dev)
> struct resource *res = NULL;
> int ret, irq;
>
> - i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
> + i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL);
> if (!i2c) {
> ret = -ENOMEM;
> - goto emalloc;
> + goto err_nothing_to_release;
Perhaps its a good idea to return directly here, then the label
err_nothing_to_release can be removed.
> }
>
> /* Default adapter num to device id; i2c_pxa_probe_dt can override. */
> @@ -1154,18 +1154,19 @@ static int i2c_pxa_probe(struct platform_device *dev)
> if (ret > 0)
> ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type);
> if (ret < 0)
> - goto eclk;
> + goto err_nothing_to_release;
Same here.
>
> res = platform_get_resource(dev, IORESOURCE_MEM, 0);
> irq = platform_get_irq(dev, 0);
> if (res == NULL || irq < 0) {
> ret = -ENODEV;
> - goto eclk;
> + goto err_nothing_to_release;
Same here.
> }
>
> - if (!request_mem_region(res->start, resource_size(res), res->name)) {
> + if (!devm_request_mem_region(&dev->dev, res->start,
> + resource_size(res), res->name)) {
> ret = -ENOMEM;
> - goto eclk;
> + goto emalloc;
We could also return directly here since the release_mem_region call should
be removed, as mentioned in Jingoos reply.
> }
>
> i2c->adap.owner = THIS_MODULE;
> @@ -1176,16 +1177,16 @@ static int i2c_pxa_probe(struct platform_device *dev)
>
> strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name));
>
> - i2c->clk = clk_get(&dev->dev, NULL);
> + i2c->clk = devm_clk_get(&dev->dev, NULL);
> if (IS_ERR(i2c->clk)) {
> ret = PTR_ERR(i2c->clk);
> - goto eclk;
> + goto emalloc;
Same here.
> }
>
> - i2c->reg_base = ioremap(res->start, resource_size(res));
> - if (!i2c->reg_base) {
> + i2c->reg_base = devm_ioremap_resource(&adev->dev, res));
> + if (IS_ERR(i2c->reg_base)) {
> ret = -EIO;
> - goto eremap;
> + goto emalloc;
Same here.
> }
>
> i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr;
> @@ -1227,10 +1228,10 @@ static int i2c_pxa_probe(struct platform_device *dev)
> i2c->adap.algo = &i2c_pxa_pio_algorithm;
> } else {
> i2c->adap.algo = &i2c_pxa_algorithm;
> - ret = request_irq(irq, i2c_pxa_handler, IRQF_SHARED,
> - dev_name(&dev->dev), i2c);
> + ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler,
> + IRQF_SHARED, dev_name(&dev->dev), i2c);
> if (ret)
> - goto ereqirq;
> + goto emalloc;
Same here.
> }
>
> i2c_pxa_reset(i2c);
> @@ -1261,15 +1262,9 @@ static int i2c_pxa_probe(struct platform_device *dev)
> eadapt:
> if (!i2c->use_pio)
> free_irq(irq, i2c);
The free_irq() call should also be removed since devm_request_irq() was used.
> -ereqirq:
> - clk_disable_unprepare(i2c->clk);
> - iounmap(i2c->reg_base);
> -eremap:
> - clk_put(i2c->clk);
> -eclk:
> - kfree(i2c);
> emalloc:
> release_mem_region(res->start, resource_size(res));
> +err_nothing_to_release:
> return ret;
> }
>
Best regards,
Emil Goode
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
